High Power Solar Mobile Charger

Flexible solar charger
Solar panel Peak power: 1.6W
Output volt range: DC4.8V/5.8V/8.4V/9.0V
Li-Battery capacity: 4200mA
Smart Solar Charger&Power Bank
Introduction
The Smart Solar Charger & Bank is specially designed for Multi-purpose, with a Built-in high-capacity rechargeable lithium polymer battery and 1.6W solar panel though intelligent MCU Multi-output volt range, you can charge your cell phone, digital camera, PDA, PSP, GPS, DV, MP3, MP4 and many other appliance.
An innovative design concept, ultra-thin aluminum casing, variety color options, It is fashion beautiful and easy to carry. It is safe, reliable, high capacity, long life, multi-function.

Indication of use
Notes: Please, before use of this product, make sure there are more than two full charges and discharge, to improve the built-in battery efficiency.

Charge indicates
1,Charge before use this product. There are three methods:
Sun light: open the charger and place it directly under sunlight, red light indicate the li-battery is been charging. The green light suggests full charge. (Auto power-off protection function)
USB charge: connected to PC USB port. Red light indicate the li-battery is been charging. The green light suggests full charge. (special designed Power Management IC to protect your PC from been hurt)
DC charge: Red light indicates the li-battery is been charging. The green light suggests full charge. It can be charged by Car Chargers.
2,Before use the smart solar charger, please check the manual of your digital device or power adapter. Long press ON/OFF button ( 3-5 s )to power on the smart solar charger. Red volt LED light indicates the working statues and the default output volt is 4.8V. Long press adjustment button ( 3-5 s )to select output volt to 4.8V, 5.8V, 8.4V, 9.0V (Long press once alter output volt once). Connect your device and smart solar charger to charge. When charging, your cell phone or other digital device will show charging indication and can be used (intelligent protection function make sure your device is been protected even your output volt isn’t proper).
3,During working status, long press( 3-5 s ) ON/OFF button to open super-brightness LED light. It could supply over 100 hours LED light to fulfill your need under any occasion. long press( 3-5 s ) ON/OFF button again to power off the charger.
Features
1,Smart MCU control, intelligent design and five protections (over-charging, over-discharging, over-current, short-circuit, over-heat) to make sure safety.
2,Especially suit for emergency situations
3,It is especially helpful when you travel or fieldwork outside. The smart solar Bank can provided a UPS power for your cell phone any time anywhere.
4,Easy to use
No matter when and where, with the smart solar Bank, you can charger your cell phone or other digital product.
5,High efficiency charging
Been charged by the smart solar charger for 60 minutes your cell phone will be working for 100 to 150 minutes. With the special designed circuit it is safe to use when charging.
6,Environment protection & saving energy
With the smart solar mobile charger, it is a great contribution to the environment.
7,Stylish & Easy to carry
An innovative design concept, ultra-thin aluminum casing, variety color options, It is fashion beautiful and easy to carry.
8,Several different voltage options
Output Voltage ranges: 4.8V,5.8V,8.4V,9V. With this ability, the smart solar charger can be widely used.
9,High-brightness LED light
The high-brightness LED light can work over 100 hours, it is reliable and convenient to use in night and any emergency occasion.
Specifications
Solar panel Peak power:1.6W
Volt: 5V
Input port: DC
Output port: USB, 5P
li-Battery capacity: 4200mAh
Working temperature: -10°C--65°C
Charged with solar power: 14-20 hours (Solar light intensity: 1000W/m2)
Current when charge by solar power: 230mA-300mA (Solar light intensity: 1000W/m2)
DC input volt: 4.8V-7.5V±0.5V
DC input current: 900mA-1200mA(1A)
Time of DC charge: 3.5-5.5 hours
Output volt range: DC4.8V/5.8V/8.4V/9.0V(±0.2V)
Output current: 400mA-800mA(0.8A)
Low battery indication: Red LED light flashing when battery power is insufficient.
Indication
1, Please use the original adapters and wire in order to achieve the best effects.
2, Do not use sharp objects scratching the surface of solar panel.
3, Beyond the scope of use cannot charge or power supply voltage will damage the charger and peripheral equipment.
4, Avoid using in hot temperature (over 70 degrees), humid and corrosive environment, and do not place near the fire source.
5, Output can be restored after Short-Circuit Protection started 10 seconds.

LED flashlight
System ON/OFF & LED option Key
Output volt shift key
DC input port
USB output port



123
dfds
dfsd
ghyihy