extensively used in different grid-tied PV power stations
Main Features:
Spacious box structure with plenty room inside
to prevent temperature increase caused by heating of reverse-current-proof diode.
Specific
FJ 16/JHD series bus terminal
is used and it has a better protective insulation property than other conventional bare copper bus.
The power supply of communication module is
220V AC mains
and no power conversion device is required.
The measurement of DC current collector is in wire penetration form without peeling wire insulation layer, which is safe and reliable.
The communication module is in
once cast forming
and has the advantages of good sealing and low demand of working environment.
Technical Data of HL Series PV Array Lightning Protection Combiner Box
Max. Quantity of Modules Connected
8/16
Max. DC Input Voltage
1000V
Max. DC Input Current in Each Route
10A
Fuse Rating (Each Route)
10A
Max. Output Current
80A/160A
Enclosure Waterproof Rating
IP65
Function of Reverse Current Prevention
Yes
Environment Temperature
-25°C-+70°C
Relative Humidity
≤95%(25°C)
Site Altitude
≤2000m
Weight (approximate)
17.5kg/27kg
Dimensions (W×H×D)
400mm×524mm×178.5mm
500mm×627mm×178.5mm
680mm×524mm×178.5mm
680mm×627mm×178.5mm
Saturday, July 16, 2011
PV Array Thunder-Proof Combiner Box(With function of current reverse proof )
extensively used in different grid-tied PV power stations
Main Features:
Spacious box structure with plenty room inside
to prevent temperature increase caused by heating of reverse-current-proof diode.
Specific
FJ 16/JHD series bus terminal
is used and it has a better protective insulation property than other conventional bare copper bus.
The power supply of communication module is
220V AC mains
and no power conversion device is required.
The measurement of DC current collector is in wire penetration form without peeling wire insulation layer, which is safe and reliable.
The communication module is in
once cast forming
and has the advantages of good sealing and low demand of working environment.
Technical Data of HL Series PV Array Lightning Protection Combiner Box
Max. Quantity of Modules Connected
8/16
Max. DC Input Voltage
1000V
Max. DC Input Current in Each Route
10A
Fuse Rating (Each Route)
10A
Max. Output Current
80A/160A
Enclosure Waterproof Rating
IP65
Function of Reverse Current Prevention
Yes
Environment Temperature
-25°C-+70°C
Relative Humidity
≤95%(25°C)
Site Altitude
≤2000m
Weight (approximate)
17.5kg/27kg
Dimensions (W×H×D)
400mm×524mm×178.5mm
500mm×627mm×178.5mm
680mm×524mm×178.5mm
680mm×627mm×178.5mm
Main Features:
Spacious box structure with plenty room inside
to prevent temperature increase caused by heating of reverse-current-proof diode.
Specific
FJ 16/JHD series bus terminal
is used and it has a better protective insulation property than other conventional bare copper bus.
The power supply of communication module is
220V AC mains
and no power conversion device is required.
The measurement of DC current collector is in wire penetration form without peeling wire insulation layer, which is safe and reliable.
The communication module is in
once cast forming
and has the advantages of good sealing and low demand of working environment.
Technical Data of HL Series PV Array Lightning Protection Combiner Box
Max. Quantity of Modules Connected
8/16
Max. DC Input Voltage
1000V
Max. DC Input Current in Each Route
10A
Fuse Rating (Each Route)
10A
Max. Output Current
80A/160A
Enclosure Waterproof Rating
IP65
Function of Reverse Current Prevention
Yes
Environment Temperature
-25°C-+70°C
Relative Humidity
≤95%(25°C)
Site Altitude
≤2000m
Weight (approximate)
17.5kg/27kg
Dimensions (W×H×D)
400mm×524mm×178.5mm
500mm×627mm×178.5mm
680mm×524mm×178.5mm
680mm×627mm×178.5mm
PV Array Thunder-Proof Combiner Box-With function of current reverse proof and running state measurement
extensively used in different grid-tied PV power stations
Main Features:
Spacious box structure with plenty room inside
to prevent temperature increase caused by heating of reverse-current-proof diode.
Specific
FJ 16/JHD series bus terminal
is used and it has a better protective insulation property than other conventional bare copper bus.
The power supply of communication module is
220V AC mains
and no power conversion device is required.
The measurement of DC current collector is in wire penetration form without peeling wire insulation layer, which is safe and reliable.
The communication module is in
once cast forming
and has the advantages of good sealing and low demand of working environment.
Technical Data of HL Series PV Array Lightning Protection Combiner Box
Max. Quantity of Modules Connected
8/16
Max. DC Input Voltage
1000V
Max. DC Input Current in Each Route
10A
Fuse Rating (Each Route)
10A
Max. Output Current
80A/160A
Enclosure Waterproof Rating
IP65
Function of Reverse Current Prevention
Yes
Environment Temperature
-25°C-+70°C
Relative Humidity
≤95%(25°C)
Site Altitude
≤2000m
Weight (approximate)
17.5kg/27kg
Dimensions (W×H×D)
400mm×524mm×178.5mm
500mm×627mm×178.5mm
680mm×524mm×178.5mm
680mm×627mm×178.5mm
Main Features:
Spacious box structure with plenty room inside
to prevent temperature increase caused by heating of reverse-current-proof diode.
Specific
FJ 16/JHD series bus terminal
is used and it has a better protective insulation property than other conventional bare copper bus.
The power supply of communication module is
220V AC mains
and no power conversion device is required.
The measurement of DC current collector is in wire penetration form without peeling wire insulation layer, which is safe and reliable.
The communication module is in
once cast forming
and has the advantages of good sealing and low demand of working environment.
Technical Data of HL Series PV Array Lightning Protection Combiner Box
Max. Quantity of Modules Connected
8/16
Max. DC Input Voltage
1000V
Max. DC Input Current in Each Route
10A
Fuse Rating (Each Route)
10A
Max. Output Current
80A/160A
Enclosure Waterproof Rating
IP65
Function of Reverse Current Prevention
Yes
Environment Temperature
-25°C-+70°C
Relative Humidity
≤95%(25°C)
Site Altitude
≤2000m
Weight (approximate)
17.5kg/27kg
Dimensions (W×H×D)
400mm×524mm×178.5mm
500mm×627mm×178.5mm
680mm×524mm×178.5mm
680mm×627mm×178.5mm
PV Combiner Box WL-AB-160A-16
Fuse holders with Fuses+ Breaker+lightning-protection
Over voltage protection
Over Current protection
The Winline WL-AB Series Combiner Boxes is based on a reliable platform that is used in Photovoltaic (PV) . It reduces system costs and installation time, increases system reliability and stability, improves fire event safety, operations and maintenance activities. The Winline WL-AB Series Combiner Boxes meet all applicable CE requirements. Product line fits the need for any large-scale grid-connected PV system.
Special order is available.
Before we quote, please provide the following information so that we can give the best price to you! Thank you
Order information:
NO.
Description
Parameter
1
Rated Input Voltage
?
2
Max Open Circuit Voltage
?
3
Number of Inputs
?
4
Rated Input Current
?
5
Short-circuit Current
?
6
PV Module arrangement
? in series and? in parallel
7
Extra requirement
?
Over voltage protection
Over Current protection
The Winline WL-AB Series Combiner Boxes is based on a reliable platform that is used in Photovoltaic (PV) . It reduces system costs and installation time, increases system reliability and stability, improves fire event safety, operations and maintenance activities. The Winline WL-AB Series Combiner Boxes meet all applicable CE requirements. Product line fits the need for any large-scale grid-connected PV system.
Special order is available.
Before we quote, please provide the following information so that we can give the best price to you! Thank you
Order information:
NO.
Description
Parameter
1
Rated Input Voltage
?
2
Max Open Circuit Voltage
?
3
Number of Inputs
?
4
Rated Input Current
?
5
Short-circuit Current
?
6
PV Module arrangement
? in series and? in parallel
7
Extra requirement
?
156 x 156 Mono-crystalline silicon wafer
156 x 156 Mono-crystalline silicon wafer
156 x 156 Mono-crystalline silicon wafer
Size (mm), 156 x 156
Conductivity type, P/N
Orientation, <100> ±3º
Resistivity (Ω.cm), 0.5—3.0
Life time (μs), >=10
Oxygen content (atmos/cm
3
) , <=1.0 x 10
18
Carbon content (atmos/cm
3
) , <=5.0 x 10
16
Dislocation density (pcs/cm
2
), <=3000
Length(mm) , 156 x 156 ±0.5
Thickness(μm), 200 ±20
TTV (μm) <=30
Bow (μm) <50
Surface quality, clean, no finger print
156 x 156 Mono-crystalline silicon wafer
Size (mm), 156 x 156
Conductivity type, P/N
Orientation, <100> ±3º
Resistivity (Ω.cm), 0.5—3.0
Life time (μs), >=10
Oxygen content (atmos/cm
3
) , <=1.0 x 10
18
Carbon content (atmos/cm
3
) , <=5.0 x 10
16
Dislocation density (pcs/cm
2
), <=3000
Length(mm) , 156 x 156 ±0.5
Thickness(μm), 200 ±20
TTV (μm) <=30
Bow (μm) <50
Surface quality, clean, no finger print
PV Combiner Box WL-AB-16
lightning-protection
Over voltage protection
Anti-kickback
Disconnection breaker
The Winline WL-AB-16 Combiner Boxes is based on a reliable platform that is used in Photovoltaic (PV) . It reduces system costs and installation time, increases system reliability and stability, improves fire event safety, operations and maintenance activities. The Winline WL-AB Series Combiner Boxes meet all applicable CE requirements. Product line fits the need for any large-scale grid-connected PV system and Wind Turbine system. Special order is available.
Before we quote, please provide the following information so that we can give the best price to you! Thank you
Order information:
NO.
Description
Parameter
1
Rated Input Voltage （PV strings）
?
2
Max Open Circuit Voltage
?
3
Number of Inputs
?
4
Rated Input Current
?
5
Short-circuit Current
?
Over voltage protection
Anti-kickback
Disconnection breaker
The Winline WL-AB-16 Combiner Boxes is based on a reliable platform that is used in Photovoltaic (PV) . It reduces system costs and installation time, increases system reliability and stability, improves fire event safety, operations and maintenance activities. The Winline WL-AB Series Combiner Boxes meet all applicable CE requirements. Product line fits the need for any large-scale grid-connected PV system and Wind Turbine system. Special order is available.
Before we quote, please provide the following information so that we can give the best price to you! Thank you
Order information:
NO.
Description
Parameter
1
Rated Input Voltage （PV strings）
?
2
Max Open Circuit Voltage
?
3
Number of Inputs
?
4
Rated Input Current
?
5
Short-circuit Current
?
PV Combiner Box WL-AB-80-8M8
Communication Interface, RS485
Current measuring, monitoring and controlling
Lightning-protection
Over voltage protection
The Winline WL-AB Series Intelligent Combiner Boxes is based on a reliable platform that is used in Photovoltaic (PV) and Wind Turbine applications. It reduces system costs and installation time, increases system reliability and stability, improves fire event safety, operations and maintenance activities. The Winline WL-AB Series Intelligent Combiner Boxes meet all applicable CE requirements. Product line fits the need for any large-scale grid-connected PV system and Wind Turbine system. Special order is available.
Before we quote, please provide the following information so that we can give the best price to you! Thank you
Order information:
NO.
Description
Parameter
1
Rated Input Voltage
?
2
Max Open Circuit Voltage
?
3
Number of Inputs
?
4
Rated Input Current
?
5
Short-circuit Current
?
6
PV Array Current Measurement
With or without
7
Current Measurement Mode
Every 1 input or Every 2 Inputs
Current measuring, monitoring and controlling
Lightning-protection
Over voltage protection
The Winline WL-AB Series Intelligent Combiner Boxes is based on a reliable platform that is used in Photovoltaic (PV) and Wind Turbine applications. It reduces system costs and installation time, increases system reliability and stability, improves fire event safety, operations and maintenance activities. The Winline WL-AB Series Intelligent Combiner Boxes meet all applicable CE requirements. Product line fits the need for any large-scale grid-connected PV system and Wind Turbine system. Special order is available.
Before we quote, please provide the following information so that we can give the best price to you! Thank you
Order information:
NO.
Description
Parameter
1
Rated Input Voltage
?
2
Max Open Circuit Voltage
?
3
Number of Inputs
?
4
Rated Input Current
?
5
Short-circuit Current
?
6
PV Array Current Measurement
With or without
7
Current Measurement Mode
Every 1 input or Every 2 Inputs
PV Connector
1.Water proof and dust proof .
2.Simple,quick installation .
3.Highest current rating in industry.
4.competitive price .
T4 solar connector for PV system
main feature:
1.Connector adopts touch and insertion of reed with inner-knob type.
2.Auto-lock equipment of male and female points enable connection more easy and reliable.
3.Popular figure suit most of field installation
4.Simple on-site processing
5.Mating safety provided by keyed housings
6.Mutiple plugging and unplugging cycles
7.Accoomodates PV cable with deferent insulation diamaters
8.High current carrying capacity
Technical data:
Mode: T4
Insulation material: PPO
Rated current: 30A
Rated voltage: 1000V
Test voltage: 6KV(50Hz,1Min)
Contact resistance:5mΩ
Protection degree: IP67
Safe class: 2
Flame class:UL94-V0
Insertion force: ≤50N
Withdarawal force: ≥50N
Ambient temperature range: -40°C~+90°C
Suitable cable: 2.5~6.0mm2 AWG14/12/10
Pin dimensions: φ4.0mm
Shipment:
1.we ship to world wide
2.Most orders ship within 1-7 business days on payment received(except holiday)
3.Item shipped from China mainland using airmail by EMS,UPS,DHL,TNT
or Hong kong Post Office,reach most of the countries within 6 to 14 business days.
4.Delivery time depends on destination and other factors,it may takes up to 20 business days.
5.After we ship the item,we will email you the shipping information,as well as the tracking number.
6.If it happens to be any duties,taxes and any other fees charged by the courier company
and your respective country,the buyers are duty to pay.
2.Simple,quick installation .
3.Highest current rating in industry.
4.competitive price .
T4 solar connector for PV system
main feature:
1.Connector adopts touch and insertion of reed with inner-knob type.
2.Auto-lock equipment of male and female points enable connection more easy and reliable.
3.Popular figure suit most of field installation
4.Simple on-site processing
5.Mating safety provided by keyed housings
6.Mutiple plugging and unplugging cycles
7.Accoomodates PV cable with deferent insulation diamaters
8.High current carrying capacity
Technical data:
Mode: T4
Insulation material: PPO
Rated current: 30A
Rated voltage: 1000V
Test voltage: 6KV(50Hz,1Min)
Contact resistance:5mΩ
Protection degree: IP67
Safe class: 2
Flame class:UL94-V0
Insertion force: ≤50N
Withdarawal force: ≥50N
Ambient temperature range: -40°C~+90°C
Suitable cable: 2.5~6.0mm2 AWG14/12/10
Pin dimensions: φ4.0mm
Shipment:
1.we ship to world wide
2.Most orders ship within 1-7 business days on payment received(except holiday)
3.Item shipped from China mainland using airmail by EMS,UPS,DHL,TNT
or Hong kong Post Office,reach most of the countries within 6 to 14 business days.
4.Delivery time depends on destination and other factors,it may takes up to 20 business days.
5.After we ship the item,we will email you the shipping information,as well as the tracking number.
6.If it happens to be any duties,taxes and any other fees charged by the courier company
and your respective country,the buyers are duty to pay.
PV Grid Connected Inverter (4KW Single-Phase)
PV Grid Connected Inverter
1. Solar or Wind Power System
2. High Efficiency with CE and AS477,G83 Approved
3. LCD display
Model
SDS 4000W
DC Input
MPPT Voltage Range
DC100 ~ 500V
Recommend PV Array
Open Circuit Voltage
200~400V
Control System
MPPT
AC Output
Output Power
4000W
Rated Grid voltage
AC220
Grid Voltage range
AC 185 ~ 264V (1 phase)
Normal Grid Frequency
50/60Hz(Grid frequency)
Phase
1 phase 2 wire
Power Factor
>0.95
Current THD
At rated power and in the sine wave < 3. 5%
Control System
PWM
Anti-islanding
≤0.5 sec
Total Max.Current
18A
Max. Efficiency
97%
Euro Efficiency
96.4%
Structure
Protection Class
IP65
Cooling system
Natural cooling
Noise
< 25dB
1. Solar or Wind Power System
2. High Efficiency with CE and AS477,G83 Approved
3. LCD display
Model
SDS 4000W
DC Input
MPPT Voltage Range
DC100 ~ 500V
Recommend PV Array
Open Circuit Voltage
200~400V
Control System
MPPT
AC Output
Output Power
4000W
Rated Grid voltage
AC220
Grid Voltage range
AC 185 ~ 264V (1 phase)
Normal Grid Frequency
50/60Hz(Grid frequency)
Phase
1 phase 2 wire
Power Factor
>0.95
Current THD
At rated power and in the sine wave < 3. 5%
Control System
PWM
Anti-islanding
≤0.5 sec
Total Max.Current
18A
Max. Efficiency
97%
Euro Efficiency
96.4%
Structure
Protection Class
IP65
Cooling system
Natural cooling
Noise
< 25dB
PV Ground mounting solar mounting bracket price
Pitched roof solar mount system
1 easy installation,
2 low cost
3 comply with AS/NZS1170
4 OEM/ODM is welcomed
Tile roof solar mounting system is designed in accordance with prevailing standards and regulations and are manufactured from aluminum and stainless steel.This enables us to guarantee high durability and complete recyclability of our components.
8 Modules general information(1.36~1.92kw)
Modules[L*W*H](mm)
1950*992*50
1650*992*50
1580 x 805 x 50
Standards
AS / NZS 1170
Installation Site
tile roof
Component direction
vertical
Structural materials:
aluminum, stainless steel
Color
natural
Wind Load(m / s)
42
Snow Load(KN / m2)
1.4
Temperature Range
-50 ° ~ 100 °
Rail I length(mm)
2051
2051
3354
No. roof interface fixing
points per rail
2
2
4
Approx. structure area
[incl. modules] (m2)
16.3
13.8
10.8
Approx. weight on roof
[excl. modules] (kg)
31
31
28
Components
8 x I-rails
4x Splice Kits
12 x Inter clamps
8 x end clamps
16 x hook components
8 x I-rails
4x Splice Kits
12 x Inter clamps
8 x end clamps
16 x hook components
4 x I-rails
12 x Inter clamps
8 x end clamps
16 x hook components
I-Rail
Our light rail is the most cost-effective rail in the industry. Its slim profile design saves aluminum and expense. Yet it’s more than strong enough for flush mount applications. Modules can be easily attached.
Splice Kits
I-Rail can be mounted end to end in order to create continuous rows of modules. Simply splice as many Solar Mounts together as required.
Inter and end clamps
Inter and end clamps quickly and securely mount your modules to our rails from the top. Ideal for flush mount projects, our aluminum alloy components reliably clamp onto any point of the module frame.
Hook components
A variety of hooks and wood screws quickly and securely connecting the roof beams and rail I.
Warranty
10 year limited Product Warranty, 5 year limited Finish Warranty.
Solar roof mount system are designed in accordance with prevailing standards and regulations and are manufactured from aluminum and stainless steel. This enables us to guarantee high durability and complete recyclability of our components.
1 easy installation,
2 low cost
3 comply with AS/NZS1170
4 OEM/ODM is welcomed
Tile roof solar mounting system is designed in accordance with prevailing standards and regulations and are manufactured from aluminum and stainless steel.This enables us to guarantee high durability and complete recyclability of our components.
8 Modules general information(1.36~1.92kw)
Modules[L*W*H](mm)
1950*992*50
1650*992*50
1580 x 805 x 50
Standards
AS / NZS 1170
Installation Site
tile roof
Component direction
vertical
Structural materials:
aluminum, stainless steel
Color
natural
Wind Load(m / s)
42
Snow Load(KN / m2)
1.4
Temperature Range
-50 ° ~ 100 °
Rail I length(mm)
2051
2051
3354
No. roof interface fixing
points per rail
2
2
4
Approx. structure area
[incl. modules] (m2)
16.3
13.8
10.8
Approx. weight on roof
[excl. modules] (kg)
31
31
28
Components
8 x I-rails
4x Splice Kits
12 x Inter clamps
8 x end clamps
16 x hook components
8 x I-rails
4x Splice Kits
12 x Inter clamps
8 x end clamps
16 x hook components
4 x I-rails
12 x Inter clamps
8 x end clamps
16 x hook components
I-Rail
Our light rail is the most cost-effective rail in the industry. Its slim profile design saves aluminum and expense. Yet it’s more than strong enough for flush mount applications. Modules can be easily attached.
Splice Kits
I-Rail can be mounted end to end in order to create continuous rows of modules. Simply splice as many Solar Mounts together as required.
Inter and end clamps
Inter and end clamps quickly and securely mount your modules to our rails from the top. Ideal for flush mount projects, our aluminum alloy components reliably clamp onto any point of the module frame.
Hook components
A variety of hooks and wood screws quickly and securely connecting the roof beams and rail I.
Warranty
10 year limited Product Warranty, 5 year limited Finish Warranty.
Solar roof mount system are designed in accordance with prevailing standards and regulations and are manufactured from aluminum and stainless steel. This enables us to guarantee high durability and complete recyclability of our components.
PV Junction Box
PV Junction Box:
Maximum Working Voltage:1000V DC
Maximum Power: 180~280W
Safety Level: class ll
PV Junction Box:
PV-BRT-8103 PV Junction Box adopts crowned spring and has automatic locking mechanism on plugs to ensure solid connection between contact and connector. Connector plug (negative) is equipped with buttons that are symmetric at the bottom to ensure the convenience of removal. Such
removal does not need any extra instruments, therefore, can make sure
that the plug is intact. This advanced product, with easy usage, is more
convenient to use than similar products. In addition, the product also
confirms to DIN V VDE V 0126-3.
Main Technical Specification:
Maximum Working Voltage:1000V DC
Maximum Power: 180~280W
Ambient Temperature Range:—40°C~+85°C
Safety Level: class ll
Water-proof Rating:IP65
Specification of Connecting Line : 4mm2
Contact Resistance:≤5mΩ
Pollution Degree: 3
Flame Retardant Rating:UL94-V0
Dimension: 140mm*117mm*26mm
Features:
With excellent aging resistance and UV endurance, it can be used in
harsh environment. The cable connection adopts means of rivet and lock.
It does not need extra instruments for the removal of plugs and removal
will not cause any harm to plugs.
Maximum Working Voltage:1000V DC
Maximum Power: 180~280W
Safety Level: class ll
PV Junction Box:
PV-BRT-8103 PV Junction Box adopts crowned spring and has automatic locking mechanism on plugs to ensure solid connection between contact and connector. Connector plug (negative) is equipped with buttons that are symmetric at the bottom to ensure the convenience of removal. Such
removal does not need any extra instruments, therefore, can make sure
that the plug is intact. This advanced product, with easy usage, is more
convenient to use than similar products. In addition, the product also
confirms to DIN V VDE V 0126-3.
Main Technical Specification:
Maximum Working Voltage:1000V DC
Maximum Power: 180~280W
Ambient Temperature Range:—40°C~+85°C
Safety Level: class ll
Water-proof Rating:IP65
Specification of Connecting Line : 4mm2
Contact Resistance:≤5mΩ
Pollution Degree: 3
Flame Retardant Rating:UL94-V0
Dimension: 140mm*117mm*26mm
Features:
With excellent aging resistance and UV endurance, it can be used in
harsh environment. The cable connection adopts means of rivet and lock.
It does not need extra instruments for the removal of plugs and removal
will not cause any harm to plugs.
PV Junction box
1)Type:PV-WD80-1
2)Box size:98mm*66mm*15mm
3)Material:PPO,Copper,Tin plated\
4)Waterproof:IP65
2)Box size:98mm*66mm*15mm
3)Material:PPO,Copper,Tin plated\
4)Waterproof:IP65
PV Junction box
PV Junction box,Due to highly robustness,UV-resistance,the touch protection a high grade connection is guaranteed for many ye
PV Junction box,Due to highly robustness,UV-resistance,the touch protection a high grade connection is guaranteed for many years.
Rated voltage 1000 V
Rated current 10 A
Contact resistance ≤5mΩ
Dia of pin or socket 3mm /4mm
Protection degree(mated,junction box closed/unmated) IP65/IP2X
Operating temperature -40 C to +90C
Insulation material PPO/TPE
Contact material Copper,silver plated
PV Junction box,Due to highly robustness,UV-resistance,the touch protection a high grade connection is guaranteed for many years.
Rated voltage 1000 V
Rated current 10 A
Contact resistance ≤5mΩ
Dia of pin or socket 3mm /4mm
Protection degree(mated,junction box closed/unmated) IP65/IP2X
Operating temperature -40 C to +90C
Insulation material PPO/TPE
Contact material Copper,silver plated
PV Manual laminating machinery
Manual Laminator
PLC&Touch Screen control,good temperature uniformity,intellectual emergency
and safetysystem
Manual Laminator
Function
1.Flexible operate mode, the operation of manual, semi-auto and auto can be adjusted
according to requirement.
2.Autocontrol by PLC & Touch screen display.
3.The safety and reliability of the equipment advanced by various exact warning system.
4.Emergency system and safety grating ensure safety and reliability when meet any
emergency.
5.High temperature-uniformity obtained by thick heating platen of oil heating
6.Method to open lid: Pneumatic clamshell type, tetrastyle lifting (option).
PLC&Touch Screen control,good temperature uniformity,intellectual emergency
and safetysystem
Manual Laminator
Function
1.Flexible operate mode, the operation of manual, semi-auto and auto can be adjusted
according to requirement.
2.Autocontrol by PLC & Touch screen display.
3.The safety and reliability of the equipment advanced by various exact warning system.
4.Emergency system and safety grating ensure safety and reliability when meet any
emergency.
5.High temperature-uniformity obtained by thick heating platen of oil heating
6.Method to open lid: Pneumatic clamshell type, tetrastyle lifting (option).
156 x 156 Poly-crystalline silicon wafer
156 x 156 Poly-crystalline silicon wafer
156 x 156
Poly-crystalline silicon wafer
Size (mm), 156 x 156
Growth method, DSS
Conductivity type, P/N
Orientation, <100>
Dopant, Boron
Resistivity (Ω.cm), 0.8-3.0Ω.cm
Bulk Lifetime (μs), ≥ 2μs
Oxygen content (atmos/cm
3
) , ≤ 6.0 x 10
17
Carbon content (atmos/cm
3
) , ≤ 7.0 x 10
17
Width of wafer (mm) , 156 x 156 ± 0.5
Square sides angle, 45 º ± 10º
Straight sections length deviation, 0.5-2mm
Thickness(μm), 200 ±20
TTV (μm), ≤ 30
Saw mark, ≤ 15μm
Warp (μm), ≤ 75
Chips, Depth<0.3mm; Length<0.5mm
Surface quality, no stain, no edge breakage no pinhole and cracks by visual inspection.
156 x 156
Poly-crystalline silicon wafer
Size (mm), 156 x 156
Growth method, DSS
Conductivity type, P/N
Orientation, <100>
Dopant, Boron
Resistivity (Ω.cm), 0.8-3.0Ω.cm
Bulk Lifetime (μs), ≥ 2μs
Oxygen content (atmos/cm
3
) , ≤ 6.0 x 10
17
Carbon content (atmos/cm
3
) , ≤ 7.0 x 10
17
Width of wafer (mm) , 156 x 156 ± 0.5
Square sides angle, 45 º ± 10º
Straight sections length deviation, 0.5-2mm
Thickness(μm), 200 ±20
TTV (μm), ≤ 30
Saw mark, ≤ 15μm
Warp (μm), ≤ 75
Chips, Depth<0.3mm; Length<0.5mm
Surface quality, no stain, no edge breakage no pinhole and cracks by visual inspection.
PV Mini Solar Regulator 12V /24V with LED
Describtion:
1.Profession manufacturer
2.Two years warranty
3.CE &RoHS Certificate
4.OEM
PLR3030 Solar charge controller
The Fangpusun PR 10-30 Series of charge controller is the highlight in the range.
The latest charging technologies, combined with a Fangpusun AtonIC state of charge
determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be
connected to it.
Product features:
1.Hybrid controller
2.PWM control
3.Night light function
4.Monthly maintenance charge
5.Load disconnection depending on SOC
6. Voltage: 12v/24v
7.Current: 10A, 15A,20A,30A
Electronic protection functions:
1.Electronic protection functions
2.Overcharge protection
3.Deep discharge protection
4.Automatic electronic fuse
5.Battery overcharge shutdown
Certificates:
1. CE &RoHS Certificates
2. Made in China
1.Profession manufacturer
2.Two years warranty
3.CE &RoHS Certificate
4.OEM
PLR3030 Solar charge controller
The Fangpusun PR 10-30 Series of charge controller is the highlight in the range.
The latest charging technologies, combined with a Fangpusun AtonIC state of charge
determination which has been significantly improved once again, result in optimal battery maintenance and control of the module output of up to 900 Wp which can be
connected to it.
Product features:
1.Hybrid controller
2.PWM control
3.Night light function
4.Monthly maintenance charge
5.Load disconnection depending on SOC
6. Voltage: 12v/24v
7.Current: 10A, 15A,20A,30A
Electronic protection functions:
1.Electronic protection functions
2.Overcharge protection
3.Deep discharge protection
4.Automatic electronic fuse
5.Battery overcharge shutdown
Certificates:
1. CE &RoHS Certificates
2. Made in China
PV Mini Solar Intelligent Hall Current Sensor
Hot sale
OEM Services
Two Years Warranty
CE & RoHS Certificates
Accessories for Fangpusun Tarom and Fangpusun Power Tarom
Fangpusun PA HS200
Shunt
The Fangpusun PA HS200 is a highly intelligent current sensor with extremely low own consumption.
The Fangpusun PA HS200 comes into play when an inverter is directly connected to the battery and the
Fangpusun Tarom or Power Tarom Charge controller, cann't measure the current consumption.
The data is transmitted to the charge controller over a cable connection. Up to
two Fangpusun PA HS200 shunts
can be connected and the measured currents can be selectively added to the charging current, battery current
or load current as desired.
Product features
Automatic detection of voltage
Wide current measuring range
Potential free current measurement
Communicates and stores data in the Fangpusun PA Tarom
Integrated Hall sensor
Displays
LED shows operating states
Messages via Fangpusun Tarom LCD display
Interfaces
Two RJ45 cable sockets
OEM Services
Two Years Warranty
CE & RoHS Certificates
Accessories for Fangpusun Tarom and Fangpusun Power Tarom
Fangpusun PA HS200
Shunt
The Fangpusun PA HS200 is a highly intelligent current sensor with extremely low own consumption.
The Fangpusun PA HS200 comes into play when an inverter is directly connected to the battery and the
Fangpusun Tarom or Power Tarom Charge controller, cann't measure the current consumption.
The data is transmitted to the charge controller over a cable connection. Up to
two Fangpusun PA HS200 shunts
can be connected and the measured currents can be selectively added to the charging current, battery current
or load current as desired.
Product features
Automatic detection of voltage
Wide current measuring range
Potential free current measurement
Communicates and stores data in the Fangpusun PA Tarom
Integrated Hall sensor
Displays
LED shows operating states
Messages via Fangpusun Tarom LCD display
Interfaces
Two RJ45 cable sockets
PV Module 130 W (mono-crystalline solar panel )
PV Module 130 W (mono-crystalline soalr panel )
PV Module 130 W (mono-crystalline soalr panel )
Model No
FS-M130
Max. Power
130W
Open Voltage
30.5V
Short Current
5.77A
Max. Power Voltage
26.5V
Max. Power Current
4.91A
Temperature of Coefficients of Isc
+0.033%/
o
C
Temperature of Coefficients of Voc
-0.36%/
o
C
Temperature of Coefficients of Pm
-0.44%/
o
C
Operating Temperature
-40
o
C to +85
o
C
Cell Type
Mono-crystalline (125*125)
No. of Cells
54 series
Max. System Voltage
1000VDC
Surface Max. Load Capacity
60m/s(200kg/ m2)
Weight
13kg
Dimensions
1202*808*40mm
best choise of you .
PV Module 130 W (mono-crystalline soalr panel )
Model No
FS-M130
Max. Power
130W
Open Voltage
30.5V
Short Current
5.77A
Max. Power Voltage
26.5V
Max. Power Current
4.91A
Temperature of Coefficients of Isc
+0.033%/
o
C
Temperature of Coefficients of Voc
-0.36%/
o
C
Temperature of Coefficients of Pm
-0.44%/
o
C
Operating Temperature
-40
o
C to +85
o
C
Cell Type
Mono-crystalline (125*125)
No. of Cells
54 series
Max. System Voltage
1000VDC
Surface Max. Load Capacity
60m/s(200kg/ m2)
Weight
13kg
Dimensions
1202*808*40mm
best choise of you .
PV Module BBPV- 230W Poly Solar Panel PV Solar Module
PV Solar Module
PV Module BBPV- 230W Poly Solar Panel PV Solar Module PV Panel PV Solar Panel
Certifications: TUV IEC VDE UL C
PV Solar Module
PV Module BBPV- 230W Poly Solar Panel PV Solar Module PV Panel PV Solar Panelis designed to withstand harsh environments and extreme operating conditions.
Electrical Characteristics
Module Type
Poly-crystalline
Nominal Peak Power (Wp)
230W
Nominal Voltage (Vmp)
30V
Nominal Current (Imp)
7.66A
Open Circuit Voltage (Voc)
37V
Short Circuit Current (Isc)
8.18A
Module Efficiency
13.9%
Maximum System Voltage
1000VDC
STC: 1000W/m², 25 °C, AM=1.5
Physical Characteristics
Length
1650mm
Width
992mm
Thickness
50mm
Weight
20kg
No. of Cells
60 Poly-crystalline 156×156mm
Front Glass
3.2mm tempered
Frame
Anodized aluminium
Junction Box
IP 65 rated, TUV approval
Output Cables
900mm length cable/compliable with MC4 connectors
Thermal characteristics
Nominal Operating Cell Temperature (NOCT)
45+/-2°C
Voltage Temperature Coefficient (Voc)
-(0.34±0.01)%/°C
Current Temperature Coefficient (Isc)
-(0.055±0.01)%/°C
Current Temperature Coefficient (Pmax)
-(0.47±0.05)%/°C
Power Tolerance
0 to +3% (no negative tolerance)
Operating Temperature: -40 °C to + 85 °
Warranty and Certifications
Warranty
7 years workmanship;
10 years 90%, 30 years 80% power warranty
Certifications
TUV, IEC 61215, IEC 61730, VDE, CE, UL
Loading Capacity
20'GP (PCS)
204
40'GP (PCS)
442
40'HQ (PCS)
480
We supply high quality, high efficiency solar module, solar panel, pv module, pv solar panel, pv solar module, pv panel to the world.
PV Module BBPV- 230W Poly Solar Panel PV Solar Module PV Panel PV Solar Panel
Certifications: TUV IEC VDE UL C
PV Solar Module
PV Module BBPV- 230W Poly Solar Panel PV Solar Module PV Panel PV Solar Panelis designed to withstand harsh environments and extreme operating conditions.
Electrical Characteristics
Module Type
Poly-crystalline
Nominal Peak Power (Wp)
230W
Nominal Voltage (Vmp)
30V
Nominal Current (Imp)
7.66A
Open Circuit Voltage (Voc)
37V
Short Circuit Current (Isc)
8.18A
Module Efficiency
13.9%
Maximum System Voltage
1000VDC
STC: 1000W/m², 25 °C, AM=1.5
Physical Characteristics
Length
1650mm
Width
992mm
Thickness
50mm
Weight
20kg
No. of Cells
60 Poly-crystalline 156×156mm
Front Glass
3.2mm tempered
Frame
Anodized aluminium
Junction Box
IP 65 rated, TUV approval
Output Cables
900mm length cable/compliable with MC4 connectors
Thermal characteristics
Nominal Operating Cell Temperature (NOCT)
45+/-2°C
Voltage Temperature Coefficient (Voc)
-(0.34±0.01)%/°C
Current Temperature Coefficient (Isc)
-(0.055±0.01)%/°C
Current Temperature Coefficient (Pmax)
-(0.47±0.05)%/°C
Power Tolerance
0 to +3% (no negative tolerance)
Operating Temperature: -40 °C to + 85 °
Warranty and Certifications
Warranty
7 years workmanship;
10 years 90%, 30 years 80% power warranty
Certifications
TUV, IEC 61215, IEC 61730, VDE, CE, UL
Loading Capacity
20'GP (PCS)
204
40'GP (PCS)
442
40'HQ (PCS)
480
We supply high quality, high efficiency solar module, solar panel, pv module, pv solar panel, pv solar module, pv panel to the world.
PV Module Solar Junction Box
PV Module Solar Junction Box
1. Protection: IP65
2. Compatible with MC4
3. Water-proof and Dust-proof
4. TUV Certificate
:
PV Module Solar Junction Box
1. Protection: IP65
2. Compatible with MC4
3. Water-proof and Dust-proof
4. TUV Certificate
Product Description
NPST’s PV junction box (NSPT320300) is specially applied to PV power generation field. Its major function is to connect and protect solar modules as well as deliver the current generated by those modules. The product meets the standard :DIN V VDE V 0126-5:2008.
Product Features
1. Adopting high quality outdoor engineering plastic with excellent insulation, anti-ultraviolet, and high fire resistance complying with UL94V-0
2. Demonstrating safe, reliable and excellent lasting functionality, applicable in harsh outdoors working ambient
3. Simple, quick and safety installation
4. Excellent box design, with good thermal dissipation
Technical Specifications
Rated current: 12A
Withstanding Voltage: 1000V DC
Maximum module working voltage: 100V
Temperature Range: -40°C---+85°C
Contact Resistance: ≤5mΩ
Protection Class: Class II
Protection Degree: IP65
Flame Class: UL94—V0
Insulation Material: PPO
Contact Material: copper /Nickel-plated
Cable Size Range: PV1—F 1*4.0 mm2
Connector: MC-K4SXL / PV-PLS-SII, MC-K4SXL / PV-PLS-BII
Bypass diode: 15SQ050 / 6pcs
Dimension: 147*114*27mm
Application Class: Class A
Pollution degree: 3
1. Protection: IP65
2. Compatible with MC4
3. Water-proof and Dust-proof
4. TUV Certificate
:
PV Module Solar Junction Box
1. Protection: IP65
2. Compatible with MC4
3. Water-proof and Dust-proof
4. TUV Certificate
Product Description
NPST’s PV junction box (NSPT320300) is specially applied to PV power generation field. Its major function is to connect and protect solar modules as well as deliver the current generated by those modules. The product meets the standard :DIN V VDE V 0126-5:2008.
Product Features
1. Adopting high quality outdoor engineering plastic with excellent insulation, anti-ultraviolet, and high fire resistance complying with UL94V-0
2. Demonstrating safe, reliable and excellent lasting functionality, applicable in harsh outdoors working ambient
3. Simple, quick and safety installation
4. Excellent box design, with good thermal dissipation
Technical Specifications
Rated current: 12A
Withstanding Voltage: 1000V DC
Maximum module working voltage: 100V
Temperature Range: -40°C---+85°C
Contact Resistance: ≤5mΩ
Protection Class: Class II
Protection Degree: IP65
Flame Class: UL94—V0
Insulation Material: PPO
Contact Material: copper /Nickel-plated
Cable Size Range: PV1—F 1*4.0 mm2
Connector: MC-K4SXL / PV-PLS-SII, MC-K4SXL / PV-PLS-BII
Bypass diode: 15SQ050 / 6pcs
Dimension: 147*114*27mm
Application Class: Class A
Pollution degree: 3
PV Module ZY240D-24
PV Module
1.Pm:240w
2.Vmp:34.6v
3.Imp:6.94A
4.Size:1956*992*50mm
PV Module
Item No.:
ZY240D-24
Maximum Power(W)
240
Optimun Power Voltage(Vmp)
34.6
Optimum Operatige Current(Imp)
6.94
Open Circuit Current(Voc)
43.2
Short Circuit Current(Isc)
7.6
Solar Cell
156*156 Mono
Number Of Cell(pcs)
6*12
Size Of Module(mm)
1956*992*50
Caple & connector Type
TUV
Junction Box Type
TUV
Frame (Material Corners,etc)
Aluminium-Alloy
Backing(Brand Type)
TPT
Cell Effiency for 240w(%)
13.8
N/W(KG)
23
Tolerance Wattage (e.g.+/-5%)
±5%
Front Glass Thickness(mm)
3.2
Temperature Coefficients of Isc(%)
-0.35
Temperature Coefficients of Voc(%)
0.05
Temperature Coefficients of Pm(%)
-0.45
Temperature Range
-40°C~+85°C
Surface Maximum Load Capacity
2400 Pa
Allowable Hall Load
23 m/s, 7.53 g
Number Of Bypass Diode
3
Warranty
90% of 10 years,80% of 25 years
Standard Test Conditions
AM 1.5 1000W/25 ±2°C
1.Pm:240w
2.Vmp:34.6v
3.Imp:6.94A
4.Size:1956*992*50mm
PV Module
Item No.:
ZY240D-24
Maximum Power(W)
240
Optimun Power Voltage(Vmp)
34.6
Optimum Operatige Current(Imp)
6.94
Open Circuit Current(Voc)
43.2
Short Circuit Current(Isc)
7.6
Solar Cell
156*156 Mono
Number Of Cell(pcs)
6*12
Size Of Module(mm)
1956*992*50
Caple & connector Type
TUV
Junction Box Type
TUV
Frame (Material Corners,etc)
Aluminium-Alloy
Backing(Brand Type)
TPT
Cell Effiency for 240w(%)
13.8
N/W(KG)
23
Tolerance Wattage (e.g.+/-5%)
±5%
Front Glass Thickness(mm)
3.2
Temperature Coefficients of Isc(%)
-0.35
Temperature Coefficients of Voc(%)
0.05
Temperature Coefficients of Pm(%)
-0.45
Temperature Range
-40°C~+85°C
Surface Maximum Load Capacity
2400 Pa
Allowable Hall Load
23 m/s, 7.53 g
Number Of Bypass Diode
3
Warranty
90% of 10 years,80% of 25 years
Standard Test Conditions
AM 1.5 1000W/25 ±2°C
PV Module
240W Mono Solar Panel
1. Using brand cells, JA, Solarfun
2. High load capacity:5400pa
3. Conform to TUV
4. Tolerance: +/-3%
240W Mono Solar Panel
I. Quality and Safety
1. 5-year warranty on product materials and processing technology
2. Power output warranty: 10years: 90%, 25 years:80%
3. Produced with brand solar cells: JA, Solarfun, LDK
4. Produced with TUV certificated components: junction box, EVA and so on.
II. Applications
1. On-grid residential roof-tops
2. On-grid commercial/industrial roof-tops
3. Solar power plants
4. Off-grid system
5. Other on-grid/off-grid applications
III. Mechanical Characteristics
Cell Type: 6 inch mono
Dimension: 1652*992*50mm
Matrix of cells: 6X10
Weight: 21.5kgs
Cable Type, Diameter and Length: TUV certified, 4mm
2
, 900mm
Type of Connector: MC type
Junction Box: IP65
No. of Draining Holes in Fram: 16
Bypass Diods: 6
IV. Electrical Characteristics
Maximum Power at STC (Pmax)(W): 240W
Max System Voltage(V): 1000VDC
Maximum Power Votlage (Vmp)(V): 29.8V
Maximum power Current(Imp)(A): 8.08A
Open Circuit Voltage(Voc)(V): 37.2V
Short Circuit Current(Isc)(A): 8.41A
V. Temperature Coefficients
Pmax: -0.48%/°C
Voc: -0.347%/°C
Isc: 0.055%/°C
VI. Limits
Tolerance:< ±3%
Working Temperature Range: -40°C to +85°C
Mechanical Load: <5400Pa
Maximum Series Fuse Rating: 15A
VII. Package
2pcs/carton
40pcs/pallet
520pcs/40ft conainter
Rothsen
1. Using brand cells, JA, Solarfun
2. High load capacity:5400pa
3. Conform to TUV
4. Tolerance: +/-3%
240W Mono Solar Panel
I. Quality and Safety
1. 5-year warranty on product materials and processing technology
2. Power output warranty: 10years: 90%, 25 years:80%
3. Produced with brand solar cells: JA, Solarfun, LDK
4. Produced with TUV certificated components: junction box, EVA and so on.
II. Applications
1. On-grid residential roof-tops
2. On-grid commercial/industrial roof-tops
3. Solar power plants
4. Off-grid system
5. Other on-grid/off-grid applications
III. Mechanical Characteristics
Cell Type: 6 inch mono
Dimension: 1652*992*50mm
Matrix of cells: 6X10
Weight: 21.5kgs
Cable Type, Diameter and Length: TUV certified, 4mm
2
, 900mm
Type of Connector: MC type
Junction Box: IP65
No. of Draining Holes in Fram: 16
Bypass Diods: 6
IV. Electrical Characteristics
Maximum Power at STC (Pmax)(W): 240W
Max System Voltage(V): 1000VDC
Maximum Power Votlage (Vmp)(V): 29.8V
Maximum power Current(Imp)(A): 8.08A
Open Circuit Voltage(Voc)(V): 37.2V
Short Circuit Current(Isc)(A): 8.41A
V. Temperature Coefficients
Pmax: -0.48%/°C
Voc: -0.347%/°C
Isc: 0.055%/°C
VI. Limits
Tolerance:< ±3%
Working Temperature Range: -40°C to +85°C
Mechanical Load: <5400Pa
Maximum Series Fuse Rating: 15A
VII. Package
2pcs/carton
40pcs/pallet
520pcs/40ft conainter
Rothsen
PV Mounting Rack
PV Mounting solution. We provide rack for flat roof, pitched roof and ground mount.
We provide PV Mounting system. We are expert on PV rack for flat roof, pitched roof and ground mount.
We provice excellent service and competitive price to contribute to the development of clean solar energy.
We provide PV Mounting system. We are expert on PV rack for flat roof, pitched roof and ground mount.
We provice excellent service and competitive price to contribute to the development of clean solar energy.
PV PANEL with IEC/CE certificates
PV panel:
1. TUV,IEC,CE,UL,cUL,MCS,ISO,Kiers
2. Whole value chain(capacity:800MW)
3. Warranty:25 years 80%, 10 years 90%
Long Energy provides a wide range of high quality PV panel and balance of systems for solar electricity application
Our PV panel is designed according to and complying with all requirements in IEC 61730 and IEC 61215 ed2(Certified by TUV Rheinland )
We use on our PV panel white tempered glass, EVA, weather-proof substrate film and anodized aluminium frame to provide adequate protection against various environmental conditions
Visual inspection, performance measurement and dielectric strength tests on every PV panel
Each of our PV panel is backed by a 25 year limited power warranty (≥80%) and 10 year workmanship warranty
Customization upon request.
Features:
1) Use of premium quality raw material from leading world-wide suppliers
2) Strict quality control and power classification of modules
3) Ready to use with junction box, cabling and connectors
4) Be resistant to atmospheric exposure and effects of delamination
5)TUV,CE,IEC61215,IEC61730,UL,CUL, MCS And Kier Certificates
Pmax
160W
165W
170W
175W
180W
185W
Voc
43.4V
43.6V
44.2V
44.2V
44.2V
44.6V
Isc
5.09A
5.10A
5.15A
5.25A
5.36A
5.60A
Vmp
34.5V
35.4V
35.6V
35.8V
36.2V
37.0V
Imp
4.64A
4.66A
4.78A
4.89A
4.97A
5.00A
Tolerance
±3%
Fuse rating
10A
Maximum system voltage
DC1000V
Dimension
1582*809*50mm/1580*808*35mm
Cell type
125*125mm/72 mono-crystalline cells
Net weight
16.5KG
Mechanical load
5400Pa
NOCT
47±3°C
Operating temperature
-40 to 85°C
1. TUV,IEC,CE,UL,cUL,MCS,ISO,Kiers
2. Whole value chain(capacity:800MW)
3. Warranty:25 years 80%, 10 years 90%
Long Energy provides a wide range of high quality PV panel and balance of systems for solar electricity application
Our PV panel is designed according to and complying with all requirements in IEC 61730 and IEC 61215 ed2(Certified by TUV Rheinland )
We use on our PV panel white tempered glass, EVA, weather-proof substrate film and anodized aluminium frame to provide adequate protection against various environmental conditions
Visual inspection, performance measurement and dielectric strength tests on every PV panel
Each of our PV panel is backed by a 25 year limited power warranty (≥80%) and 10 year workmanship warranty
Customization upon request.
Features:
1) Use of premium quality raw material from leading world-wide suppliers
2) Strict quality control and power classification of modules
3) Ready to use with junction box, cabling and connectors
4) Be resistant to atmospheric exposure and effects of delamination
5)TUV,CE,IEC61215,IEC61730,UL,CUL, MCS And Kier Certificates
Pmax
160W
165W
170W
175W
180W
185W
Voc
43.4V
43.6V
44.2V
44.2V
44.2V
44.6V
Isc
5.09A
5.10A
5.15A
5.25A
5.36A
5.60A
Vmp
34.5V
35.4V
35.6V
35.8V
36.2V
37.0V
Imp
4.64A
4.66A
4.78A
4.89A
4.97A
5.00A
Tolerance
±3%
Fuse rating
10A
Maximum system voltage
DC1000V
Dimension
1582*809*50mm/1580*808*35mm
Cell type
125*125mm/72 mono-crystalline cells
Net weight
16.5KG
Mechanical load
5400Pa
NOCT
47±3°C
Operating temperature
-40 to 85°C
1.35W 1800MAH Portable Solar Backpack
*Portable Solar Backpack
*1.35W solar Panel
*1800MAH Battery Capacity
*apply to charger any phone
*Best Price,Wise Performac
1.35W 1800MAH Portable Solar Backpack
The
Portable Solar Backpack efficiently charger your electronic devices by taking energy from the sun and converting it to electricity which can be used to both run and easily charge your mobile electronic devices in safely on the go. The larger capacity of Power bank allowing you to use the solar charger bag to charge the portable battery, and then simply take that with you to charge your electronic devices at night or when it's cloudy
Solar Cell A/V Curve
Feature
Project
content
1
It comes with 5 Adapters to make it compatible with iPhones, iPods, PDAs, Cell phone forNOKIA, SAMSUNG, LG, APPLE,SONY etc popular electronic device
2
Charges all iPhone, iPod,PDA and cell phones less than 2 HOURS
3
All compartments are padded and reinforced. There is even room to spare for extra documents,making this ideal for use with work, travel, or even camping.
4
Extra heavy-duty stitching throughout
5
Fully padded back panel with spiral channel for air flows
6
Designed for easy dismantling and recycling.
Specification
Projec
Main Parameter
Project
Main Parameter
Discription
Solar Backpack
Size/Weight
230mm x 160mm x90mm /500g
Color
Black /orange /yellow /blue
Battery Capacity
3.7V 1800MAH
solar panel
5.5V 1.35W
Output Current
550-800MA
Using time
5 hours
Materials
600D Double-strand PU/Sandwich Wire/EPE/210T Lining 5# Zip Tap/5# Slider/Elastic WebbingPP/Velcro/Plastic Nylon Accessories
Charger time
Charging time for the Lithium polymer battery inside using the solar panel:10-12 hours/AC : 2-4hours
Packing
CTN:50*38*40CM N.W.:10KG G.W.:11KG 20PCS/CTN
Packing
1
1x Solar Charger
2
1x USB Charge Cable
3
5 x Adapter
4
1XUser Manual
*1.35W solar Panel
*1800MAH Battery Capacity
*apply to charger any phone
*Best Price,Wise Performac
1.35W 1800MAH Portable Solar Backpack
The
Portable Solar Backpack efficiently charger your electronic devices by taking energy from the sun and converting it to electricity which can be used to both run and easily charge your mobile electronic devices in safely on the go. The larger capacity of Power bank allowing you to use the solar charger bag to charge the portable battery, and then simply take that with you to charge your electronic devices at night or when it's cloudy
Solar Cell A/V Curve
Feature
Project
content
1
It comes with 5 Adapters to make it compatible with iPhones, iPods, PDAs, Cell phone forNOKIA, SAMSUNG, LG, APPLE,SONY etc popular electronic device
2
Charges all iPhone, iPod,PDA and cell phones less than 2 HOURS
3
All compartments are padded and reinforced. There is even room to spare for extra documents,making this ideal for use with work, travel, or even camping.
4
Extra heavy-duty stitching throughout
5
Fully padded back panel with spiral channel for air flows
6
Designed for easy dismantling and recycling.
Specification
Projec
Main Parameter
Project
Main Parameter
Discription
Solar Backpack
Size/Weight
230mm x 160mm x90mm /500g
Color
Black /orange /yellow /blue
Battery Capacity
3.7V 1800MAH
solar panel
5.5V 1.35W
Output Current
550-800MA
Using time
5 hours
Materials
600D Double-strand PU/Sandwich Wire/EPE/210T Lining 5# Zip Tap/5# Slider/Elastic WebbingPP/Velcro/Plastic Nylon Accessories
Charger time
Charging time for the Lithium polymer battery inside using the solar panel:10-12 hours/AC : 2-4hours
Packing
CTN:50*38*40CM N.W.:10KG G.W.:11KG 20PCS/CTN
Packing
1
1x Solar Charger
2
1x USB Charge Cable
3
5 x Adapter
4
1XUser Manual
Friday, July 15, 2011
PV PANEL with IEC/CE certificates
PV PANEL
1. Bankable,TUV,CE,UL,Kiers
2. 17.5% efficiency
3. complete value chain (capacity:300MW/year)
PV PANEL
Maximum power (Pmax): 185w
Open circuit voltage( Voc):44.6V
Short circuit current (Isc):5.60A
Maximum power voltage (Vmp):37.0V
Maximum power current (Imp):5.00A
Fuse rating:10A
Maximum system voltage:DC1000V
Dimension:1582*809*50mm
Weight:16.5kg
Classification:
Safety Class II;Application A;Fire resistance class C,IP65
Pmax
160W
165W
170W
175W
180W
185W
Voc
43.4V
43.6V
44.2V
44.2V
44.2V
44.6V
Isc
5.09A
5.10A
5.15A
5.25A
5.36A
5.60A
Vmp
34.5V
35.4V
35.6V
35.8V
36.2V
37.0V
Imp
4.64A
4.66A
4.78A
4.89A
4.97A
5.00A
Tolerance
±3%
Fuse rating
10A
Maximum system voltage
DC1000V
Dimension
1582*809*50mm/1580*808*35mm
Cell type
125*125mm/72 mono-crystalline cells
Net weight
16.5KG
Mechanical load
5400Pa
NOCT
47±3°C
Operating temperature
-40 to 85°C
1. Bankable,TUV,CE,UL,Kiers
2. 17.5% efficiency
3. complete value chain (capacity:300MW/year)
PV PANEL
Maximum power (Pmax): 185w
Open circuit voltage( Voc):44.6V
Short circuit current (Isc):5.60A
Maximum power voltage (Vmp):37.0V
Maximum power current (Imp):5.00A
Fuse rating:10A
Maximum system voltage:DC1000V
Dimension:1582*809*50mm
Weight:16.5kg
Classification:
Safety Class II;Application A;Fire resistance class C,IP65
Pmax
160W
165W
170W
175W
180W
185W
Voc
43.4V
43.6V
44.2V
44.2V
44.2V
44.6V
Isc
5.09A
5.10A
5.15A
5.25A
5.36A
5.60A
Vmp
34.5V
35.4V
35.6V
35.8V
36.2V
37.0V
Imp
4.64A
4.66A
4.78A
4.89A
4.97A
5.00A
Tolerance
±3%
Fuse rating
10A
Maximum system voltage
DC1000V
Dimension
1582*809*50mm/1580*808*35mm
Cell type
125*125mm/72 mono-crystalline cells
Net weight
16.5KG
Mechanical load
5400Pa
NOCT
47±3°C
Operating temperature
-40 to 85°C
PV Panel 220W
PV Panel : Mono and Poly crystalline
Certificate: Rohs TUV IEC LVD CE ISO
No.1 PV Panel manufacturer in China
PV Panel
Our PV panels have been exported to many regions such as Europe,Australia,Americas and Asia etc with extremely splendid feedback.We are also the only company which entered Beijing top 50 companys in PV panel fields.
---------------------------------------------------------------------------------------------------------------
Specifications
Dimension of cells: 156mm x 156mm
Number of cells: 60 (6 x 10)
Dimentsion of module: 1640 x 992 x 50mm
Weight: 20.0 kg
Output
Output terminal type: Junction Box
Cable: Nanyang
Asymmetrical lengths: 900mm(-) and 900mm(+)
Connection: GZX Plug Type 0601
Electrical Figures
Maximum Power: 220Wp
Open-circuit voltage: 36.2V
Short-circuit current: 8.38A
Voltage at Pmax: 29.2V
Current at Pmax: 7.54A
Maximum system voltage: 1000VDC
Operating temperature: -40 to +85
Certificate: Rohs TUV IEC LVD CE ISO
No.1 PV Panel manufacturer in China
PV Panel
Our PV panels have been exported to many regions such as Europe,Australia,Americas and Asia etc with extremely splendid feedback.We are also the only company which entered Beijing top 50 companys in PV panel fields.
---------------------------------------------------------------------------------------------------------------
Specifications
Dimension of cells: 156mm x 156mm
Number of cells: 60 (6 x 10)
Dimentsion of module: 1640 x 992 x 50mm
Weight: 20.0 kg
Output
Output terminal type: Junction Box
Cable: Nanyang
Asymmetrical lengths: 900mm(-) and 900mm(+)
Connection: GZX Plug Type 0601
Electrical Figures
Maximum Power: 220Wp
Open-circuit voltage: 36.2V
Short-circuit current: 8.38A
Voltage at Pmax: 29.2V
Current at Pmax: 7.54A
Maximum system voltage: 1000VDC
Operating temperature: -40 to +85
PV Panel
PV Panel
1) 25 years warranty
2) Fast delivery time
PV Panel
Item No.:
ZY235P-24
Maximum Power(W)
220
210
200
Optimun Power Voltage(Vmp)
29.28
29.28
29.28
Optimum Operatige Current(Imp)
7.51
7.17
6.83
Open Circuit Current(VOC)
36
36
36
Short Circuit Current(ISC)
8.03
7.67
7.31
Solar Cell
156*156 Poly
Number Of Cell(pcs)
6*12
Brand Number Of Solar Cells
cell
Size Of Module(MM)
1640*980*40
Caple & connector Type
TUV
Frame (Material Corners,etc)
Aluminium-Alloy
Backing(Brand Type)
TPT
Cell Effiency for 220w(%)
15
N/W(KG)
18.96
FF(%)
70%-76%
Junction Box Type
TUV
Tolerance Wattage (e.g.+/-5%)
±5%
Front Glass Thickness(mm)
3.2
Temperature Coefficients of ISC(%)
0.04
Temperature Coefficients of VOC(%)
-0.38
Temperature Coefficients of PM(%)
-0.47
Temperature Coefficients of IM(%)
0.04
Temperature Coefficients of VM(%)
0.38
Temperature Range
-40°C
TO
85°C
Surface Maximum Load Capacity
2400 Pa
Allowable Hall Load
23 m/s, 7.53 g
Bypass Diode Rating(A)
12
Warranty
90% of 10 years,80% of 25 years
Standard Test Conditions
AM 1.5 1000W/25 ±2°C
Packing
1*20 GP
14 Pallets/316 pcs
1*40 GP
28 Pallets/756 pcs
1) 25 years warranty
2) Fast delivery time
PV Panel
Item No.:
ZY235P-24
Maximum Power(W)
220
210
200
Optimun Power Voltage(Vmp)
29.28
29.28
29.28
Optimum Operatige Current(Imp)
7.51
7.17
6.83
Open Circuit Current(VOC)
36
36
36
Short Circuit Current(ISC)
8.03
7.67
7.31
Solar Cell
156*156 Poly
Number Of Cell(pcs)
6*12
Brand Number Of Solar Cells
cell
Size Of Module(MM)
1640*980*40
Caple & connector Type
TUV
Frame (Material Corners,etc)
Aluminium-Alloy
Backing(Brand Type)
TPT
Cell Effiency for 220w(%)
15
N/W(KG)
18.96
FF(%)
70%-76%
Junction Box Type
TUV
Tolerance Wattage (e.g.+/-5%)
±5%
Front Glass Thickness(mm)
3.2
Temperature Coefficients of ISC(%)
0.04
Temperature Coefficients of VOC(%)
-0.38
Temperature Coefficients of PM(%)
-0.47
Temperature Coefficients of IM(%)
0.04
Temperature Coefficients of VM(%)
0.38
Temperature Range
-40°C
TO
85°C
Surface Maximum Load Capacity
2400 Pa
Allowable Hall Load
23 m/s, 7.53 g
Bypass Diode Rating(A)
12
Warranty
90% of 10 years,80% of 25 years
Standard Test Conditions
AM 1.5 1000W/25 ±2°C
Packing
1*20 GP
14 Pallets/316 pcs
1*40 GP
28 Pallets/756 pcs
PV Panels Solar Energy 240WP
High efficiency solar energy
1)Poly crystal solar panel
2)Cetificate:ISO,CE,ROHS,TUV
3)OEM
4)Life span 25year
Poly Crystalline Silicon Solar Panels Solar Energy 240WP
ITEM NO.: SY-240P
Cell Type: Poly-crystalline Silicon Solar cells
Maximum power (Wp): 240wp
Maximum power voltage (V): 30.5V
Maximum power current (A): 7.87A
Open circuit voltage (V): 37.00V
Short circuit current (A): 8.39A
Number of cells (Pcs): 60 (6*10) PCS
Size of module (mm): 1650 x 992 x 50mm (156*156mm cell)
Temperature Range: -40°C~+85°C
NOVT(Nominal Operating Cell Temperature): 45°C±2°C
Voltage temperature coefficient (VOC): -0.38%/°C
Current temperature coefficient(ISC): +0.1%/°C
Power temperature coefficient (Pmp): -0.47%/°C
Maximum system voltage (V): 1000V
Surface Maximum Load Capacity: 60m/s(200kg/sq.m)
Allowable Hail Load: steel ball dropped from 1 meter
Certificates: TUV, ROHS, CE, ISO
Output tolerance (%): ±3%
Weight per piece (kg): 17.5KG
Glass Type: 3.2mm Tempered Glass
Junction Box Type: Passed the TUV certified
Length of Cables (mm): 900mm
Connector Type: MC4
Frame (Material, Corners, etc.): Anodized Aluminum Alloy
Cell Efficiency (%): ≥16.43%
Module Efficiency (%): ≥14.69%
FF (%): ≥73%
Standard Test Conditions: AM1.5 100mW/cm2 25’C
Warranty: 5 years product warranty, 10years for 90% power ,25years for 80% power;
Solar
1)Poly crystal solar panel
2)Cetificate:ISO,CE,ROHS,TUV
3)OEM
4)Life span 25year
Poly Crystalline Silicon Solar Panels Solar Energy 240WP
ITEM NO.: SY-240P
Cell Type: Poly-crystalline Silicon Solar cells
Maximum power (Wp): 240wp
Maximum power voltage (V): 30.5V
Maximum power current (A): 7.87A
Open circuit voltage (V): 37.00V
Short circuit current (A): 8.39A
Number of cells (Pcs): 60 (6*10) PCS
Size of module (mm): 1650 x 992 x 50mm (156*156mm cell)
Temperature Range: -40°C~+85°C
NOVT(Nominal Operating Cell Temperature): 45°C±2°C
Voltage temperature coefficient (VOC): -0.38%/°C
Current temperature coefficient(ISC): +0.1%/°C
Power temperature coefficient (Pmp): -0.47%/°C
Maximum system voltage (V): 1000V
Surface Maximum Load Capacity: 60m/s(200kg/sq.m)
Allowable Hail Load: steel ball dropped from 1 meter
Certificates: TUV, ROHS, CE, ISO
Output tolerance (%): ±3%
Weight per piece (kg): 17.5KG
Glass Type: 3.2mm Tempered Glass
Junction Box Type: Passed the TUV certified
Length of Cables (mm): 900mm
Connector Type: MC4
Frame (Material, Corners, etc.): Anodized Aluminum Alloy
Cell Efficiency (%): ≥16.43%
Module Efficiency (%): ≥14.69%
FF (%): ≥73%
Standard Test Conditions: AM1.5 100mW/cm2 25’C
Warranty: 5 years product warranty, 10years for 90% power ,25years for 80% power;
Solar
PV Racks System JDM100 - Tile Roof
1, Specific for tilted roof
2, Match various roof tiles
3, Convenient installation
4, Reliable quality
5, 10-Year warranty
Product Features:
1.Installation Location: Tile roof
2.Wind Load: 55 m/s
3.Snow Load: 1.5 kN/m2
4.Solar Module: Framed or thin film
5.Module Alignment: Horizontal or vertical
6.Module Dimension: Any dimension
7.Standard: AS1170.2-2002,DIN1055, DIN EN 10326-2004, DIN EN 10025, DIN/ISO 898,
8.Warranty: 10 years
Product Advantages:
1.Compatible to all kinds of tile roofs in different regions.
2.Easy to install with simple hardware tools.
3.Precise dimension of rack to avoid the on-site cutting or welding.
4.Compliant to design standards of Euorpe, Australia and United States.
Component
Picture
Material
R
ail
Aluminum Alloy
Rail - Connection
Aluminum Alloy
+ Stainless
Hook
-
A
Stainless Steel
Side Clipper
Aluminum Alloy
+ Stainless
Middle Clipper
Aluminum Alloy
+ Stainless
Thin Film Side Clipper
Aluminum Alloy
+ EPDM
Thin Film Middle Clipper
Aluminum Alloy
+ EPDM
2, Match various roof tiles
3, Convenient installation
4, Reliable quality
5, 10-Year warranty
Product Features:
1.Installation Location: Tile roof
2.Wind Load: 55 m/s
3.Snow Load: 1.5 kN/m2
4.Solar Module: Framed or thin film
5.Module Alignment: Horizontal or vertical
6.Module Dimension: Any dimension
7.Standard: AS1170.2-2002,DIN1055, DIN EN 10326-2004, DIN EN 10025, DIN/ISO 898,
8.Warranty: 10 years
Product Advantages:
1.Compatible to all kinds of tile roofs in different regions.
2.Easy to install with simple hardware tools.
3.Precise dimension of rack to avoid the on-site cutting or welding.
4.Compliant to design standards of Euorpe, Australia and United States.
Component
Picture
Material
R
ail
Aluminum Alloy
Rail - Connection
Aluminum Alloy
+ Stainless
Hook
-
A
Stainless Steel
Side Clipper
Aluminum Alloy
+ Stainless
Middle Clipper
Aluminum Alloy
+ Stainless
Thin Film Side Clipper
Aluminum Alloy
+ EPDM
Thin Film Middle Clipper
Aluminum Alloy
+ EPDM
PV Ribbon wire
Lead free PV Ribbon wire; Photovoltaic Ribbon
1. Precision dimension
2. Uniform plating thickness
3. Oxygen-free copper
Pv Ribbon
1. PV Ribbon Material:Cu99.99%
2. Plating thickness:0.015 ~ 0.03 mm
3. Visual
1). There shall be no flows.
2). The surface shall be uniformly lustrous hue.
3). The surface shall be free from thick .
4. Dimensions:Thickness: 0.08-0.60 mm Width: 1.0-10.0 mm
1. Precision dimension
2. Uniform plating thickness
3. Oxygen-free copper
Pv Ribbon
1. PV Ribbon Material:Cu99.99%
2. Plating thickness:0.015 ~ 0.03 mm
3. Visual
1). There shall be no flows.
2). The surface shall be uniformly lustrous hue.
3). The surface shall be free from thick .
4. Dimensions:Thickness: 0.08-0.60 mm Width: 1.0-10.0 mm
PV Ribbon wire
Lead free PV Ribbon wire; Photovoltaic Ribbon
1. Precision dimension
2. Uniform plating thickness
3. Oxygen-free copper
Pv Ribbon
1. PV Ribbon Material:Cu99.99%
2. Plating thickness:0.015 ~ 0.03 mm
3. Visual
1). There shall be no flows.
2). The surface shall be uniformly lustrous hue.
3). The surface shall be free from thick .
4. Dimensions:Thickness: 0.08-0.60 mm Width: 1.0-10.0 mm
1. Precision dimension
2. Uniform plating thickness
3. Oxygen-free copper
Pv Ribbon
1. PV Ribbon Material:Cu99.99%
2. Plating thickness:0.015 ~ 0.03 mm
3. Visual
1). There shall be no flows.
2). The surface shall be uniformly lustrous hue.
3). The surface shall be free from thick .
4. Dimensions:Thickness: 0.08-0.60 mm Width: 1.0-10.0 mm
PV Ribbon wire
Lead free PV Ribbon wire; Photovoltaic Ribbon
1. Precision dimension
2. Uniform plating thickness
3. Oxygen-free copper
Pv Ribbon
1. PV Ribbon Material:Cu99.99%
2. Plating thickness:0.015 ~ 0.03 mm
3. Visual
1). There shall be no flows.
2). The surface shall be uniformly lustrous hue.
3). The surface shall be free from thick .
4. Dimensions:Thickness: 0.08-0.60 mm Width: 1.0-10.0 mm
1. Precision dimension
2. Uniform plating thickness
3. Oxygen-free copper
Pv Ribbon
1. PV Ribbon Material:Cu99.99%
2. Plating thickness:0.015 ~ 0.03 mm
3. Visual
1). There shall be no flows.
2). The surface shall be uniformly lustrous hue.
3). The surface shall be free from thick .
4. Dimensions:Thickness: 0.08-0.60 mm Width: 1.0-10.0 mm
PV Solar Grid Connected Inverter (12KW Single-Phase)
Solar Grid tie inverter
Used with a connection to grid or power lines
Certificate:CE
Max Efficiency:97% Efficiency is 98%.
Model
SDS-12KW
DC Input
MPPT Voltage Range
DC100 ~ 450V
Rated DC Voltage
360V
Control System
MPPT
AC Output
Output Power
10K W
Rate voltage
AC220
AC380
V oltage range
AC 185V ~ 264V (1 phase)
AC 342V ~ 418V(3 phase)
Normal Grid Frequency
50/60Hz (Grid frequency)
Phases
1 phase 2 wire
3 phase 4 wire
Power Factor
> 0.95
Current THD
At rated power and in the sine wave <5%
Control System
PWM
Anti-islanding
≤0.5 sec
Max.Current
45.2A
26.7A
Max. Efficiency
97%
Euro Efficiency
96.4%
Structure
Protection Class
IP20
Cooling system
Natural cooling
Noise
< 50dB
Data Interfaces
External RS232C/RS485
Web Module( Option)
RS232C to TCP/IP
Display
LCD
Packing Dimensions
(W*H*D)
700*460*840mm
Net weigh,, , , , t
63.5 kgs
64 kgs
Gross weight
67.5kgs
68kgs
Protection
Inverter
Input over voltage, output short circuit, overheat, output DC component.
Grid
Anti-islandin g, over/under voltage of grid, over/under frequency of grid.
Environment
Environment
No corrosion gas, flammable gas, oil mist, dust etc.
Operation temperature
-10 °C ~40 °C ( 50 °C )
Stored temperature
-20 °C ~ 65 °C
Relative humidity
0~100% (Do not wet with dew)
Used with a connection to grid or power lines
Certificate:CE
Max Efficiency:97% Efficiency is 98%.
Model
SDS-12KW
DC Input
MPPT Voltage Range
DC100 ~ 450V
Rated DC Voltage
360V
Control System
MPPT
AC Output
Output Power
10K W
Rate voltage
AC220
AC380
V oltage range
AC 185V ~ 264V (1 phase)
AC 342V ~ 418V(3 phase)
Normal Grid Frequency
50/60Hz (Grid frequency)
Phases
1 phase 2 wire
3 phase 4 wire
Power Factor
> 0.95
Current THD
At rated power and in the sine wave <5%
Control System
PWM
Anti-islanding
≤0.5 sec
Max.Current
45.2A
26.7A
Max. Efficiency
97%
Euro Efficiency
96.4%
Structure
Protection Class
IP20
Cooling system
Natural cooling
Noise
< 50dB
Data Interfaces
External RS232C/RS485
Web Module( Option)
RS232C to TCP/IP
Display
LCD
Packing Dimensions
(W*H*D)
700*460*840mm
Net weigh,, , , , t
63.5 kgs
64 kgs
Gross weight
67.5kgs
68kgs
Protection
Inverter
Input over voltage, output short circuit, overheat, output DC component.
Grid
Anti-islandin g, over/under voltage of grid, over/under frequency of grid.
Environment
Environment
No corrosion gas, flammable gas, oil mist, dust etc.
Operation temperature
-10 °C ~40 °C ( 50 °C )
Stored temperature
-20 °C ~ 65 °C
Relative humidity
0~100% (Do not wet with dew)
PV Solar Module
Long Service Life
High Efficiency Solar Cells
Special Aluminum Frame Design
High Transmission, Low Iron Tempered Glass
Model Number: ZT-175W
Electrical Characteristics
Maximum Power as per STC 175Pmax(W)
Power Tolerance +/-5%
Maximum Power Voltage 36.72 Vm(V)
Maximum Power Current 4.77 Im(A)
Open Circuit Voltage 43.99 Voc(V)
Short Circuit Current 5.17 Isc(A)
Maximum System Voltage 1000 VDC
Cell Efficiency 16.3%
Module Efficiency 14.7%
Cell Size 125*125mm
Temperature coefficient of Isc 0.05%/
o
C
Temperature coefficient of Voc -0.34%/
o
C
Temperature coefficient of power -0.5%/
o
C
NOCT-Nominal operating cell temperature 47+/-2
o
C
Operating Temperature -40~+85
o
C
High Efficiency Solar Cells
Special Aluminum Frame Design
High Transmission, Low Iron Tempered Glass
Model Number: ZT-175W
Electrical Characteristics
Maximum Power as per STC 175Pmax(W)
Power Tolerance +/-5%
Maximum Power Voltage 36.72 Vm(V)
Maximum Power Current 4.77 Im(A)
Open Circuit Voltage 43.99 Voc(V)
Short Circuit Current 5.17 Isc(A)
Maximum System Voltage 1000 VDC
Cell Efficiency 16.3%
Module Efficiency 14.7%
Cell Size 125*125mm
Temperature coefficient of Isc 0.05%/
o
C
Temperature coefficient of Voc -0.34%/
o
C
Temperature coefficient of power -0.5%/
o
C
NOCT-Nominal operating cell temperature 47+/-2
o
C
Operating Temperature -40~+85
o
C
156*156 monocrystalline silicon solar cells
1.size:156*156mm Mono-crystalline silicon solar cells
2.photoelectric conversion efficiency:about 18%
3.25 yrs lifespan
Certification-ISO9001:2008; ISO14001:2004;TUV,CE,UL,CUL,MCS
156mm Monocrystalline silicon solar cells
Dimension(mm*mm):156×156
Diagonal(mm):200±1.0
Thickness(um):210±30.0
Front:1.8mm busbar(Ag),silicon nitride
back:3mm busbar(Ag),closed aluminium BSF
Model
Dimension (mm*mm,mm)
Coversion effiency(%)
Pmax(W)
Voc(V)
Isc(A)
FF(%)
EN-SM156-184
156*156,200
18.4
4.397
0.629
8.821
79.2
EN-SM156-182
156*156,200
18.2
4.349
0.628
8.803
78.7
EN-SM156-180
156*156,200
18.0
4.301
0.628
8.725
78.5
EN-SM156-178
156*156,200
17.8
4.253
0.627
8.662
78.3
EN-SM156-176
156*156,200
17.6
4.206
0.627
8.604
78
EN-SM156-174
156*156,200
17.4
4.158
0.627
8.528
77.8
EN-SM156-172
156*156,200
17.2
4.11
0.626
8.452
77.7
EN-SM156-170
156*156,200
17.0
4.062
0.626
8.409
77.2
EN-SM156-168
156*156,200
16.8
4.014
0.625
8.362
76.8
EN-SM156-166
156*156,200
16.6
3.967
0.625
8.302
76.5
EN-SM156-164
156*156,200
16.4
3.919
0.624
8.204
76.6
EN-SM156-162
156*156,200
16.2
3.871
0.622
8.173
76.2
EN-SM156-160
156*156,200
16.0
3.823
0.619
8.162
75.7
2.photoelectric conversion efficiency:about 18%
3.25 yrs lifespan
Certification-ISO9001:2008; ISO14001:2004;TUV,CE,UL,CUL,MCS
156mm Monocrystalline silicon solar cells
Dimension(mm*mm):156×156
Diagonal(mm):200±1.0
Thickness(um):210±30.0
Front:1.8mm busbar(Ag),silicon nitride
back:3mm busbar(Ag),closed aluminium BSF
Model
Dimension (mm*mm,mm)
Coversion effiency(%)
Pmax(W)
Voc(V)
Isc(A)
FF(%)
EN-SM156-184
156*156,200
18.4
4.397
0.629
8.821
79.2
EN-SM156-182
156*156,200
18.2
4.349
0.628
8.803
78.7
EN-SM156-180
156*156,200
18.0
4.301
0.628
8.725
78.5
EN-SM156-178
156*156,200
17.8
4.253
0.627
8.662
78.3
EN-SM156-176
156*156,200
17.6
4.206
0.627
8.604
78
EN-SM156-174
156*156,200
17.4
4.158
0.627
8.528
77.8
EN-SM156-172
156*156,200
17.2
4.11
0.626
8.452
77.7
EN-SM156-170
156*156,200
17.0
4.062
0.626
8.409
77.2
EN-SM156-168
156*156,200
16.8
4.014
0.625
8.362
76.8
EN-SM156-166
156*156,200
16.6
3.967
0.625
8.302
76.5
EN-SM156-164
156*156,200
16.4
3.919
0.624
8.204
76.6
EN-SM156-162
156*156,200
16.2
3.871
0.622
8.173
76.2
EN-SM156-160
156*156,200
16.0
3.823
0.619
8.162
75.7
PV Solar Mounting System, Solar Roof Mounting Kit, Aluminum Rail (Roof Integrated)
Export Markets: North America, South America, Eastern Europe, Oceania, Western Europe
Product Description
Features:
Easy installation, perfect integrated with roof, installation angle 3 degrees to 90 degrees.
This solar mounting system is designed for installation on the roofs of houses.
It is integrated into the roof structure.
Installation angle 3 degrees to 90 degrees.
It is suitable for mounting popular brand of panels Such as Suntech, Yingli, Eging, Sunpower, Sharp and others
We also provide other components for complete PV solar integrated system and install support system.
Product Description
Features:
Easy installation, perfect integrated with roof, installation angle 3 degrees to 90 degrees.
This solar mounting system is designed for installation on the roofs of houses.
It is integrated into the roof structure.
Installation angle 3 degrees to 90 degrees.
It is suitable for mounting popular brand of panels Such as Suntech, Yingli, Eging, Sunpower, Sharp and others
We also provide other components for complete PV solar integrated system and install support system.
PV Solar Panel (DSP120D)
1.Solar Panel CE ISO9001:2000
2.Solar panel quality by great solar engineers
3.Manufacturing in lowest price
4.Top equipment
Solar Panel
Model
DSP120D
Ratin power (Pm)
120W
Cells
1070(L) x800(W) x35(H) mm
Number of cells
36 (4x9) series connected
Size
1200 (L) x 550(W) x35(H) mm²
Weight
10.5 Kg
Typical application
12V DC
Maximum voltage
1000V DC
Operating temperature
45°C
Hail diameter @ 80Km/h
Up to 25 mm
Continuous wind pressure
Up to 24 m/s
Efficiency of cell
≥16.55%
Tolerance
±3%
Rated current (Im)
6.45A
Rated voltage(Vm)
18.6V
Short circuit Current(Isc)
6.86A
Open circuit Voltage(Voc)
23.2V
SPECIFICATION:
1.Monocrystalline Solar Panel from 5W to 290W
2.High Effcient with competitive price
3.Rigorous Quality Control
PACKING AND DELIVERY:
1.PCAKING:2PCS/CTN
2.DELIVERY TIME:WITHIN 15 DAYS
2.Solar panel quality by great solar engineers
3.Manufacturing in lowest price
4.Top equipment
Solar Panel
Model
DSP120D
Ratin power (Pm)
120W
Cells
1070(L) x800(W) x35(H) mm
Number of cells
36 (4x9) series connected
Size
1200 (L) x 550(W) x35(H) mm²
Weight
10.5 Kg
Typical application
12V DC
Maximum voltage
1000V DC
Operating temperature
45°C
Hail diameter @ 80Km/h
Up to 25 mm
Continuous wind pressure
Up to 24 m/s
Efficiency of cell
≥16.55%
Tolerance
±3%
Rated current (Im)
6.45A
Rated voltage(Vm)
18.6V
Short circuit Current(Isc)
6.86A
Open circuit Voltage(Voc)
23.2V
SPECIFICATION:
1.Monocrystalline Solar Panel from 5W to 290W
2.High Effcient with competitive price
3.Rigorous Quality Control
PACKING AND DELIVERY:
1.PCAKING:2PCS/CTN
2.DELIVERY TIME:WITHIN 15 DAYS
PV Solar Panel (module)
High quality Mono & Poly Crystalline Solar Panels, up to certification of TUV (IEC61215, and IEC61730) , UL, and ULC.
Our factory is a professional manufacturer in solar module, solar power system and other relative solar products.
Current annual outputing for solar panels is about 50MW. The phase II project to extend capacity upto 100 MW crystalline module will complete the end of 2010.
All of our productions are under the international quality control system, ISO9001:2000. We had our products passed through certification of TUV (IEC61215, and IEC61730) , UL, and ULC.
We can offer solar module and solar power system for wide range as customers' demand. Main products include: Solar module, solar power system, solar household power system,solar lighting system, solar flashlight, solar garden light, solar streetlight, and so on.
* Materials: Mono or Poly crystalline;
* Power range: 75WP to 300WP per panel;
* Front: High-transmission (92%) 3.2mm tempered Glass;
* Back Sheet: TPT in transparent, White, Black;
* Encapsulate: F. RST EVA films;
* Junction Box: with 3 bypass diodes
* System voltage: 12v/24v/36v/48v;
* Packaging : in carton on wooden pallet;
* Products Certification: CE, IEC61215, UL, and ULC
Products Warranty: 5 years
Power Warranty (90% of PMax): 10 years
Power Warranty (80% of PMax): 25 years
Our factory is a professional manufacturer in solar module, solar power system and other relative solar products.
Current annual outputing for solar panels is about 50MW. The phase II project to extend capacity upto 100 MW crystalline module will complete the end of 2010.
All of our productions are under the international quality control system, ISO9001:2000. We had our products passed through certification of TUV (IEC61215, and IEC61730) , UL, and ULC.
We can offer solar module and solar power system for wide range as customers' demand. Main products include: Solar module, solar power system, solar household power system,solar lighting system, solar flashlight, solar garden light, solar streetlight, and so on.
* Materials: Mono or Poly crystalline;
* Power range: 75WP to 300WP per panel;
* Front: High-transmission (92%) 3.2mm tempered Glass;
* Back Sheet: TPT in transparent, White, Black;
* Encapsulate: F. RST EVA films;
* Junction Box: with 3 bypass diodes
* System voltage: 12v/24v/36v/48v;
* Packaging : in carton on wooden pallet;
* Products Certification: CE, IEC61215, UL, and ULC
Products Warranty: 5 years
Power Warranty (90% of PMax): 10 years
Power Warranty (80% of PMax): 25 years
PV Solar Panel 300W
1. product name: pv solar panel
2. maximum power: 300Wp
3. Warranty: 2 years
4. Competitive price
Specification:
Product Model
TJTH300M
Maximum Power(Pm)
300WP
Maximum Power Voltage(Vmp)
36.7
Maximum Power Current(Imp)
8.71
Open Circuit Voltage(Voc)
43.2
Short Circuit Current(Isc)
8.83
Module Size(mm)
1950*992*50( 156x156mm cell)
2. maximum power: 300Wp
3. Warranty: 2 years
4. Competitive price
Specification:
Product Model
TJTH300M
Maximum Power(Pm)
300WP
Maximum Power Voltage(Vmp)
36.7
Maximum Power Current(Imp)
8.71
Open Circuit Voltage(Voc)
43.2
Short Circuit Current(Isc)
8.83
Module Size(mm)
1950*992*50( 156x156mm cell)
PV Solar Panel BBPV-220W Poly Solar Module
PV Solar Panel BBPV-220W Poly Solar Module
PV Module PV Solar Module Solar Panel is designed to withstand harsh en
PV Solar Panel BBPV-220W Poly Solar Module
solar module
PV Solar Panel BBPV-220W Poly Solar Module PV Module PV Solar Module Solar Panel
Main Features
• Cell Type: Poly-crystalline Silicon.
• Configuration: 10 rows x 6 columns
• Frame Type: • Black anodized.
• Clear anodized.
• UL listed for electrical and fire safety (UL1703 and Class C fire rating).
• Manufactured in ISO9001 Certified factory.
• VDE certified (IEC 61215 ed.2, IEC 61730-1, IEC 61730-2 test standards).
• High and stable conversion efficiency.
• High reliability with guaranteed +3% output power tolerance.
• Built-in bypass diodes to minimize 50% less shading power drop.
• Built with anodized aluminum frames to provide structural strength.
• Innovative cable connectors for easy installation.
• Combination of high efficicncy and attractive appearance.
• Load tested to meet 5400 N/M².
• Reliable in multiple mounted configurations.
• Proven materials, including tempered front glass and a sturdy anodized aluminum frame that allows the modules to operate.
• Designed to withstand rigorous operating conditions. Testing includes
• Thermal Cycling Test.
• Thermal/Freezing and High Humidity Cycling Test.
• Electrical Isolation Test.
• Hail Impact Test.
• Mechanical, Wind and Twist Loading Test.
• Salt Mist Test.
• Light and Water-Exposure Test
Performance
• Highly efficient with high-quality cells and easy to install modules.
• Utilises or stores excess electricity based on daily consumption as required.
• Contains hermetic multifunction junction box (Waterproof Grade: IP65).
• High performance sustainability. The system features excellent weather adaptability, good hurricane lamp and impressive hail suppression. It counteracts damp and salt mist and will not be influenced by the current geographical environmental patterns.
• 30-year Limited Warranty of 80% power output; 10-year Limited Warranty of 90% power output.
• 7-year Limited Warranty of materials and workmanship.
• Product Quality Warranty & Product Liability Insurance guarantee end users’ benefits.
We supply high quality solar panel, solar moudle, pv solar panel, pv solar module, pv panel, pv module to the world.
PV Module PV Solar Module Solar Panel is designed to withstand harsh en
PV Solar Panel BBPV-220W Poly Solar Module
solar module
PV Solar Panel BBPV-220W Poly Solar Module PV Module PV Solar Module Solar Panel
Main Features
• Cell Type: Poly-crystalline Silicon.
• Configuration: 10 rows x 6 columns
• Frame Type: • Black anodized.
• Clear anodized.
• UL listed for electrical and fire safety (UL1703 and Class C fire rating).
• Manufactured in ISO9001 Certified factory.
• VDE certified (IEC 61215 ed.2, IEC 61730-1, IEC 61730-2 test standards).
• High and stable conversion efficiency.
• High reliability with guaranteed +3% output power tolerance.
• Built-in bypass diodes to minimize 50% less shading power drop.
• Built with anodized aluminum frames to provide structural strength.
• Innovative cable connectors for easy installation.
• Combination of high efficicncy and attractive appearance.
• Load tested to meet 5400 N/M².
• Reliable in multiple mounted configurations.
• Proven materials, including tempered front glass and a sturdy anodized aluminum frame that allows the modules to operate.
• Designed to withstand rigorous operating conditions. Testing includes
• Thermal Cycling Test.
• Thermal/Freezing and High Humidity Cycling Test.
• Electrical Isolation Test.
• Hail Impact Test.
• Mechanical, Wind and Twist Loading Test.
• Salt Mist Test.
• Light and Water-Exposure Test
Performance
• Highly efficient with high-quality cells and easy to install modules.
• Utilises or stores excess electricity based on daily consumption as required.
• Contains hermetic multifunction junction box (Waterproof Grade: IP65).
• High performance sustainability. The system features excellent weather adaptability, good hurricane lamp and impressive hail suppression. It counteracts damp and salt mist and will not be influenced by the current geographical environmental patterns.
• 30-year Limited Warranty of 80% power output; 10-year Limited Warranty of 90% power output.
• 7-year Limited Warranty of materials and workmanship.
• Product Quality Warranty & Product Liability Insurance guarantee end users’ benefits.
We supply high quality solar panel, solar moudle, pv solar panel, pv solar module, pv panel, pv module to the world.
PV Solar Panel
100W mono PV Solar Panels
ITEM NO
TJTH100/12V
MONO or POLY
MONO
Maximum power (Wp)
100wp
Maximum power voltage (V)
18.3
Maximum power current (A)
5. 56
Open circuit voltage (V)
22.6
Short circuit current (A)
6.64
Number of cells (Pcs)
36
Size of module (mm)
1200*550*35
Brand Name of Solar Cells
JA .
Maximum system voltage (V)
715
Temperature coefficients of Isc (%)
0.065+/-0.015%/°C
Temperature coefficients of Voc (%)
-(2.23+/-0.1)mv/ °C
Temperature coefficients of Pm (%)
-(0.5+-0.05)/ °C
Temperature coefficients of Im (%)
+0.1/ °C
Temperature coefficients of Vm (%)
-0.38/ °C
Temperature Range
-40°C~+85°C
Tolerance Wattage (e.g. +/-5%)
+/-5%
Surface Maximum Load Capacity
60m/s(200kg/sq.m)
Allowable Hail Load
steel ball fall down from 1m height
Weight per piece (kg)
6.8
Junction Box Type
GY-BOX-5C( TUV )
Length of Cables (mm)
900mm
Cell Efficiency (%)
18.2%min
Module Efficiency (%)
16.8%min
Output tolerance (%)
+/-5%
Frame (Material, Corners, etc.)
Aluminum
Standard Test Conditions)
AM1.5 100mw/cm2 25°C
Warranty
2 years product warranty and 25years 80% of power
FF (%)
76%
ITEM NO
TJTH100/12V
MONO or POLY
MONO
Maximum power (Wp)
100wp
Maximum power voltage (V)
18.3
Maximum power current (A)
5. 56
Open circuit voltage (V)
22.6
Short circuit current (A)
6.64
Number of cells (Pcs)
36
Size of module (mm)
1200*550*35
Brand Name of Solar Cells
JA .
Maximum system voltage (V)
715
Temperature coefficients of Isc (%)
0.065+/-0.015%/°C
Temperature coefficients of Voc (%)
-(2.23+/-0.1)mv/ °C
Temperature coefficients of Pm (%)
-(0.5+-0.05)/ °C
Temperature coefficients of Im (%)
+0.1/ °C
Temperature coefficients of Vm (%)
-0.38/ °C
Temperature Range
-40°C~+85°C
Tolerance Wattage (e.g. +/-5%)
+/-5%
Surface Maximum Load Capacity
60m/s(200kg/sq.m)
Allowable Hail Load
steel ball fall down from 1m height
Weight per piece (kg)
6.8
Junction Box Type
GY-BOX-5C( TUV )
Length of Cables (mm)
900mm
Cell Efficiency (%)
18.2%min
Module Efficiency (%)
16.8%min
Output tolerance (%)
+/-5%
Frame (Material, Corners, etc.)
Aluminum
Standard Test Conditions)
AM1.5 100mw/cm2 25°C
Warranty
2 years product warranty and 25years 80% of power
FF (%)
76%
PV Solar Panel
pv solar panel
1)90% power output over 10 years
2)80% power output over 25 years
3)Free of charge from defects for 5 years
TYPE
JHM230M-6zzzzz0
Nominal Output(Pmax)
210
215
220
225
230
235
240
245
250
Optimum Operating Voltage(Vmp)
29.2
29.2
29.2
29.7
29.7
30.2
30.2
30.2
30.7
Optimum Operating Current(Imp)
7.19
7.36
7.50
7.58
7.69
7.78
7.94
8.11
8.15
Open Circuit Voltage(Voc)
36.2
36.2
36.2
36.8
36.8
37.4
37.4
37.4
38.1
Short Circuit Current(Isc)
7.77
7.95
8.11
8.18
8.30
8.40
8.58
8.76
8.80
Operating Temperature
-40°C∼+85°C
Maximum System Voltage
1000V DC
Maximum Series Fuse Rating
15A
Power Tolerance
+5W
STC* (Standard Test Conditions): Irradiance 1000W/m², Module Temperature 25°C, Air Mass 1.5
TEMPERATURE CHARACTERISTICS
NOCT
45±2°C
Temperature Coefficient of Pmax
-0.47%/°C
Temperature Coefficient of Voc
-0.35%/°C
Temperature Coefficient of Isc
0.040%/°C
NOCT*: Nominal Operation Cell Temperature Sun 800W/m²,Air 20°C,Wind speed 1m/s
Mechanical Data
Cell Type
Mono-crystalline
Cell Arrangement
60(6x10) monocrystalline cells 156mm
Dimensions
1650 x 992 x 50 mm
Weight
19.5 Kg
Front Cover
3.2mm thick, low iron tempered glass
Frame Material
Anodized aluminium alloy
PS.: Fitting accepted from Japan and The United States
pv solar panel
1)90% power output over 10 years
2)80% power output over 25 years
3)Free of charge from defects for 5 years
TYPE
JHM230M-6zzzzz0
Nominal Output(Pmax)
210
215
220
225
230
235
240
245
250
Optimum Operating Voltage(Vmp)
29.2
29.2
29.2
29.7
29.7
30.2
30.2
30.2
30.7
Optimum Operating Current(Imp)
7.19
7.36
7.50
7.58
7.69
7.78
7.94
8.11
8.15
Open Circuit Voltage(Voc)
36.2
36.2
36.2
36.8
36.8
37.4
37.4
37.4
38.1
Short Circuit Current(Isc)
7.77
7.95
8.11
8.18
8.30
8.40
8.58
8.76
8.80
Operating Temperature
-40°C∼+85°C
Maximum System Voltage
1000V DC
Maximum Series Fuse Rating
15A
Power Tolerance
+5W
STC* (Standard Test Conditions): Irradiance 1000W/m², Module Temperature 25°C, Air Mass 1.5
TEMPERATURE CHARACTERISTICS
NOCT
45±2°C
Temperature Coefficient of Pmax
-0.47%/°C
Temperature Coefficient of Voc
-0.35%/°C
Temperature Coefficient of Isc
0.040%/°C
NOCT*: Nominal Operation Cell Temperature Sun 800W/m²,Air 20°C,Wind speed 1m/s
Mechanical Data
Cell Type
Mono-crystalline
Cell Arrangement
60(6x10) monocrystalline cells 156mm
Dimensions
1650 x 992 x 50 mm
Weight
19.5 Kg
Front Cover
3.2mm thick, low iron tempered glass
Frame Material
Anodized aluminium alloy
PS.: Fitting accepted from Japan and The United States
pv solar panel
PV Solar System
PV solar System
1.30W solar energy system
2.including solar panel,storage cell,control system,bracket and connection
PV solar System
Accessries
Specification
Parameter
Qty
solar panel
Monocrystaline Silicon
30W
1pc
solar storage cell
Pressurize Plumbous Acid
45AH
1pc
Solar control system
controller
10A
1pc
inverter
150W
1pc
control system box
1pc
solar panel bracket solar panel connection
1set
1.30W solar energy system
2.including solar panel,storage cell,control system,bracket and connection
PV solar System
Accessries
Specification
Parameter
Qty
solar panel
Monocrystaline Silicon
30W
1pc
solar storage cell
Pressurize Plumbous Acid
45AH
1pc
Solar control system
controller
10A
1pc
inverter
150W
1pc
control system box
1pc
solar panel bracket solar panel connection
1set
PV Solar junction box
1.We are a manufacturer of PV Solar junction box
2.High quality with TUV & UL certificate
3.Material of PVC
4.Different types
Rated Voltage:DC1000V
Rated Current:10A
Rated impulse Voltage:8000V
Pollution Degree:2
Degree of Protection:IP65
Ambient Temperature:-40°c--85°c
Rated connecting Capacity:4m°c
TYPV-BM101 PV Junction Box provides users safe, fast and reliable connectivity solutions, such junction box is applicable to connect the combination of solar panel. Compared with other similar products, its technology is more advanced, performance is more reliable, installation is more efficient.
2.High quality with TUV & UL certificate
3.Material of PVC
4.Different types
Rated Voltage:DC1000V
Rated Current:10A
Rated impulse Voltage:8000V
Pollution Degree:2
Degree of Protection:IP65
Ambient Temperature:-40°c--85°c
Rated connecting Capacity:4m°c
TYPV-BM101 PV Junction Box provides users safe, fast and reliable connectivity solutions, such junction box is applicable to connect the combination of solar panel. Compared with other similar products, its technology is more advanced, performance is more reliable, installation is more efficient.
PV Solar module(90W Mono)
PV Solar module(90W Mono)
cells efficiency 17.6%,a grade
Reasonable price:1.6usd/w~2.1usd/w
Limited warranty 25 yrs
PV Solar module(90W Mono)
Solar Panel Data Sheet
Description of Specification
Configuration
Units
Model
NES36-5-90M
General Data
Maximum Power
Pm(W)
Watts
90W
Watt Tolerance
%
±3
Application
DC12V
Storage & Operating Temperature
Deg .C
-45°C~85°C
Standard Test Conditions:Cell Temperature:25 Deg. C,Irradiance:1kW/m
2
,Air Mass: 1.5
Voltage & Ampereage
Maximum System Voltage
Volts
1000VDC
Maximum Operating Voltage
Vmp
Volts
18.5
Maximum Operating Current
Imp
Amps
4.87
Open Circuit Voltage
Voc
Volts
22.3
Short Circuit Current
Isc
Amps
5.37
Solar Cell
Cell Type and Diameter
Monocrystalline,125mm×125mm
Number of Cells
In Series
36(4×9)
Temperatures Coefficients
Temp Coefficent of Isc
Tk Isc
% per deg.C
0.055
Temp Coefficent of Voc
Tk Voc
% per deg.C
-0.34
Temp Coefficient of Pmax
Tk Pmax
% per deg.C
-0.48
Normal Op. Cell Temp (NOCT)
deg.C
45°C±2°C
Materials & Accessories Data (All Certified by CE and TUV)
Junction Box
IP65 rated
Output Cable:Wire Diameter :4mm
2
Length
mm
900
Type of Cable Connector
MC Plug Type IV
Frame:Aluminum Alloy
Anodized
Front Glass:Low Iron,High Transmisson,Tempered glass
Thickness
3.2mm
Cell Encapsulation Material
EVA
mm
0.5mm
Backsheet Cover Material
TPT
mm
0.3mm
Quality Warranty (Output Power)
Power Production
90%
Years
10
80%
Years
25
Manufacturing
Years
5
Dimensions, Packing & Loading
Dimensions:Length×Width×Height
mm
1195×541×35
Weight
kg
8
Loading Capacity in Container
Pieces / Container
20'
456pcs
Pieces / Container
40'
1026pcs
cells efficiency 17.6%,a grade
Reasonable price:1.6usd/w~2.1usd/w
Limited warranty 25 yrs
PV Solar module(90W Mono)
Solar Panel Data Sheet
Description of Specification
Configuration
Units
Model
NES36-5-90M
General Data
Maximum Power
Pm(W)
Watts
90W
Watt Tolerance
%
±3
Application
DC12V
Storage & Operating Temperature
Deg .C
-45°C~85°C
Standard Test Conditions:Cell Temperature:25 Deg. C,Irradiance:1kW/m
2
,Air Mass: 1.5
Voltage & Ampereage
Maximum System Voltage
Volts
1000VDC
Maximum Operating Voltage
Vmp
Volts
18.5
Maximum Operating Current
Imp
Amps
4.87
Open Circuit Voltage
Voc
Volts
22.3
Short Circuit Current
Isc
Amps
5.37
Solar Cell
Cell Type and Diameter
Monocrystalline,125mm×125mm
Number of Cells
In Series
36(4×9)
Temperatures Coefficients
Temp Coefficent of Isc
Tk Isc
% per deg.C
0.055
Temp Coefficent of Voc
Tk Voc
% per deg.C
-0.34
Temp Coefficient of Pmax
Tk Pmax
% per deg.C
-0.48
Normal Op. Cell Temp (NOCT)
deg.C
45°C±2°C
Materials & Accessories Data (All Certified by CE and TUV)
Junction Box
IP65 rated
Output Cable:Wire Diameter :4mm
2
Length
mm
900
Type of Cable Connector
MC Plug Type IV
Frame:Aluminum Alloy
Anodized
Front Glass:Low Iron,High Transmisson,Tempered glass
Thickness
3.2mm
Cell Encapsulation Material
EVA
mm
0.5mm
Backsheet Cover Material
TPT
mm
0.3mm
Quality Warranty (Output Power)
Power Production
90%
Years
10
80%
Years
25
Manufacturing
Years
5
Dimensions, Packing & Loading
Dimensions:Length×Width×Height
mm
1195×541×35
Weight
kg
8
Loading Capacity in Container
Pieces / Container
20'
456pcs
Pieces / Container
40'
1026pcs
156*156 polycrystalline solar cell
Polycrystalline solar cell
1.size:156*156mm
1.Power:3.6-3.9w
2.certification:TUV,CE,UL
3.Two years warranty
Polycrystalline solar cell Ever energy grade A 156
Specifications
Solar cell.156*156mm,poly solar cell.
1.Grade A ,efficiency:16%-18%
2.Stable performance.Long term stability and reliability
Solar Cell
Name:156*156mm polycrystalline solar cell
Dimension:156*156mm+/-0.5mm
Characters:High quality to ensure the stabel and high photoelctricity conversion efficency;Coating with deep blue SiN4 anti-reflection film,uniformity and beautiful appearance.
Grade:A
Efficency:16%-18%
Wafer thickness:0.220+/-0.030mm
Efficiency Code
170
168
166
164
162
160
158
156
Efficiency Eff(%)
17.00-17.19
16.80-16.99
16.60-16.79
16.40-16.39
16.20-16.39
16.00-16.19
15.80-15.99
15.60-15.79
Power Ppm(w)
4.14-4.19
4.09-4.14
4.04-4.09
3.99-4.04
3.94-3.99
3.89-3.94
3.85-3.89
3.80-3.85
Max.Power current Ipm(A)
7.97
7.91
7.82
7.77
7.72
7.67
7.62
7.56
Min.Power Current Ipm(A)
7.73
7.68
7.58
7.54
7.49
7.44
7.39
7.34
Short Circuit Current Isc(A)
8.45
8.40
8.34
8.30
8.25
8.21
8.15
8.10
Max Power Voltage Vpm(V)
0.522
0.520
0.519
0.516
0.513
0.511
0.508
0.505
Open Circuit Voltage Voc(V)
0.624
0.622
0.620
0.618
0.616
0.614
0.612
0.609
1.size:156*156mm
1.Power:3.6-3.9w
2.certification:TUV,CE,UL
3.Two years warranty
Polycrystalline solar cell Ever energy grade A 156
Specifications
Solar cell.156*156mm,poly solar cell.
1.Grade A ,efficiency:16%-18%
2.Stable performance.Long term stability and reliability
Solar Cell
Name:156*156mm polycrystalline solar cell
Dimension:156*156mm+/-0.5mm
Characters:High quality to ensure the stabel and high photoelctricity conversion efficency;Coating with deep blue SiN4 anti-reflection film,uniformity and beautiful appearance.
Grade:A
Efficency:16%-18%
Wafer thickness:0.220+/-0.030mm
Efficiency Code
170
168
166
164
162
160
158
156
Efficiency Eff(%)
17.00-17.19
16.80-16.99
16.60-16.79
16.40-16.39
16.20-16.39
16.00-16.19
15.80-15.99
15.60-15.79
Power Ppm(w)
4.14-4.19
4.09-4.14
4.04-4.09
3.99-4.04
3.94-3.99
3.89-3.94
3.85-3.89
3.80-3.85
Max.Power current Ipm(A)
7.97
7.91
7.82
7.77
7.72
7.67
7.62
7.56
Min.Power Current Ipm(A)
7.73
7.68
7.58
7.54
7.49
7.44
7.39
7.34
Short Circuit Current Isc(A)
8.45
8.40
8.34
8.30
8.25
8.21
8.15
8.10
Max Power Voltage Vpm(V)
0.522
0.520
0.519
0.516
0.513
0.511
0.508
0.505
Open Circuit Voltage Voc(V)
0.624
0.622
0.620
0.618
0.616
0.614
0.612
0.609
PV Wire(UL)
UL PV WIRE
Specifically designed for connecting photovoltaic system components inside and outside of building and equipment.
UL pv wire and cable use the advanced E-beam cross-linked processing technology. The wire with the low smoke and halogen free flame retardant material has many advantage such as high temperature resistance , anti-ozone, anti-ultraviolet, anti-water vapour, anti-microbiology, strong short-term overload ability.
1.Rating: Voltage: 600/1000V Temperature: -40°C-- 90°C
2. Description: (1)Conductor: Tinned annealed copper
(2)Insulation: 90°C XLPE , black
(3)Jacket: 90°C XLPE , black or white
3.Marking: E332231 (UL) Type PV Wire **AWG 90°C Dry and Wet 600V Sun Res -40°C VW-1 HZSF
4.Construction:
Conductor
Insulation
Insulation Standard Dia.
Jacket
Outer Dia.
Conductor resistance (20°C)
Max. Current Carrying Capacity
Type
Construction
Conductor Dia.
Standard Thickness
Standard Thickness
AWG
N/mm
(about)mm
mm
mm
mm
mm
Ω/km
Amp
10 AWG
65/0.32±0.006
2.97
1.23
5.43±0.1
0.80
7.03±0.2
3.55
62
12 AWG
65/0.254±0.006
2.36
1.22
4.80±0.1
0.80
6.40±0.2
5.64
42
14 AWG
41/0.254±0.006
1.89
1.20
4.29±0.1
0.80
5.89±0.2
8.96
25
16 AWG
26/0.254±0.006
1.49
1.20
3.89±0.1
0.80
5.49±0.2
14.6
15
Approvals:UL design tested, certificate No E 332231
5. Electrical Properties:
Item
Units
Specification
Conductor resistance(20°C)
Ω/km
–
Insulation resistance(90°C)
Ω/cm
≥10¹¹
Withstand voltage
V/5min
AC6500
Lifetime
year
≥25years
Min. Bending Radius
5D
Specifically designed for connecting photovoltaic system components inside and outside of building and equipment.
UL pv wire and cable use the advanced E-beam cross-linked processing technology. The wire with the low smoke and halogen free flame retardant material has many advantage such as high temperature resistance , anti-ozone, anti-ultraviolet, anti-water vapour, anti-microbiology, strong short-term overload ability.
1.Rating: Voltage: 600/1000V Temperature: -40°C-- 90°C
2. Description: (1)Conductor: Tinned annealed copper
(2)Insulation: 90°C XLPE , black
(3)Jacket: 90°C XLPE , black or white
3.Marking: E332231 (UL) Type PV Wire **AWG 90°C Dry and Wet 600V Sun Res -40°C VW-1 HZSF
4.Construction:
Conductor
Insulation
Insulation Standard Dia.
Jacket
Outer Dia.
Conductor resistance (20°C)
Max. Current Carrying Capacity
Type
Construction
Conductor Dia.
Standard Thickness
Standard Thickness
AWG
N/mm
(about)mm
mm
mm
mm
mm
Ω/km
Amp
10 AWG
65/0.32±0.006
2.97
1.23
5.43±0.1
0.80
7.03±0.2
3.55
62
12 AWG
65/0.254±0.006
2.36
1.22
4.80±0.1
0.80
6.40±0.2
5.64
42
14 AWG
41/0.254±0.006
1.89
1.20
4.29±0.1
0.80
5.89±0.2
8.96
25
16 AWG
26/0.254±0.006
1.49
1.20
3.89±0.1
0.80
5.49±0.2
14.6
15
Approvals:UL design tested, certificate No E 332231
5. Electrical Properties:
Item
Units
Specification
Conductor resistance(20°C)
Ω/km
–
Insulation resistance(90°C)
Ω/cm
≥10¹¹
Withstand voltage
V/5min
AC6500
Lifetime
year
≥25years
Min. Bending Radius
5D
PV amorphous silicon solar cell 125W
seni-transparent amorphous silicon solar cell
1) Size is 1400*1100
2) Efficiency is 9.5%
3) TUV testing is in process
seni-transparent amorphous silicon solar cell
1 Solar modules with excellent quality
2 Configurations with decent performance
3 Professional design and trained construction team
4 Simple to operate the maintenance
Product Specification
Dimensions(L X W X D)(mm)
1400x1100x8.2
Weight(kg)
31.5
Front Glass
4MM Super White Glass
Back Glass
3.2MM Tempered Glass
Encapsulate Film
1.0MM Transpanrent EVA
Technology
a-Si
Transmittance
Non- See Through Type
Electrical Rating
Open Circuit Voltage(V)
132
Short Circuit Current(A)
1.43
Max. Power Voltage(V)
103
Max. Power Current(A)
1.27
Efficiency
8.90%
Max. Power(W)±5%
130
Operating Temperature
Operating Temperature
-40 - 85°C
Temperature Coefficient
Max. Output Power
-0.20%/°C
Max. Power Voltage
-0.32%/°C
Max.Power Current
+0.41%/°C
Open Circuit Voltage
-0.30%/°C
Short Circuit Current
-0.09%/°C
Warranties
Life (Years)
25
Application Domain
Application Domain
BIPV, BAPV, Power Plant
Colors
Royal Blue, Sapphire and Mauve
1) Size is 1400*1100
2) Efficiency is 9.5%
3) TUV testing is in process
seni-transparent amorphous silicon solar cell
1 Solar modules with excellent quality
2 Configurations with decent performance
3 Professional design and trained construction team
4 Simple to operate the maintenance
Product Specification
Dimensions(L X W X D)(mm)
1400x1100x8.2
Weight(kg)
31.5
Front Glass
4MM Super White Glass
Back Glass
3.2MM Tempered Glass
Encapsulate Film
1.0MM Transpanrent EVA
Technology
a-Si
Transmittance
Non- See Through Type
Electrical Rating
Open Circuit Voltage(V)
132
Short Circuit Current(A)
1.43
Max. Power Voltage(V)
103
Max. Power Current(A)
1.27
Efficiency
8.90%
Max. Power(W)±5%
130
Operating Temperature
Operating Temperature
-40 - 85°C
Temperature Coefficient
Max. Output Power
-0.20%/°C
Max. Power Voltage
-0.32%/°C
Max.Power Current
+0.41%/°C
Open Circuit Voltage
-0.30%/°C
Short Circuit Current
-0.09%/°C
Warranties
Life (Years)
25
Application Domain
Application Domain
BIPV, BAPV, Power Plant
Colors
Royal Blue, Sapphire and Mauve
PV backsheet for solar modues
1.high-performance fluorine resin and strong PET film standard.
2.Meet with TUV certificates
3.ETFE+PET+EVA
Solar star TPT is composed of high-performance fluorine resin .We call the TPT as our solar star TPF, which has meet with requirement of TUV, UL certifications as well as the demands of solar module components standard.
technology data
Item(unit)
Ram (mm)
0.30-0.35
Tensile Strength(N/10mm)
130
Interlaminar Strength(N/5cm)
25
Peeling Strength(N/cm)
30
Dimension Stability(0.5h/150°C,%)
2
Water Vapor Transmission(g/m²d)
1.5
Partial Discharge Test
1000VDC
througth the high and low
Weather Resistance
temperature, 1000 hours
damp heat test
Expires
more than 20 years
2.Meet with TUV certificates
3.ETFE+PET+EVA
Solar star TPT is composed of high-performance fluorine resin .We call the TPT as our solar star TPF, which has meet with requirement of TUV, UL certifications as well as the demands of solar module components standard.
technology data
Item(unit)
Ram (mm)
0.30-0.35
Tensile Strength(N/10mm)
130
Interlaminar Strength(N/5cm)
25
Peeling Strength(N/cm)
30
Dimension Stability(0.5h/150°C,%)
2
Water Vapor Transmission(g/m²d)
1.5
Partial Discharge Test
1000VDC
througth the high and low
Weather Resistance
temperature, 1000 hours
damp heat test
Expires
more than 20 years
PV box
pv box can provide to user safty,reliable and quick way to connect. It can be used in connecting with
pv box is small and finished and provides the user with safty swift and reliable way to connector,this type can be used for small power batteries panel of solar,the connection adopts welding,for 5W-20W.
pv box is small and finished and provides the user with safty swift and reliable way to connector,this type can be used for small power batteries panel of solar,the connection adopts welding,for 5W-20W.
PV cable connector assembly
Maximum working voltage: DC1000V
Rated Current : 30A
Flame class: UL94-V0
Pollution degree: 2
PV-BRT-8201 PV Connector
Products Introduction
:
PV-BRT-8201 PV Connector adopts crowned spring and has automatic locking mechanism on plugs to ensure solid connection between contact and connector. Connector plug (negative) is equipped with buttons that are symmetric at the bottom to ensure the convenience of removal. Such removal does not need any extra instruments, therefore, can make sure that the plug is intact. This advanced product, with easy usage, is more convenient to use than similar products. In addition, the product also confirms to DIN V VDE V 0126-3.
Main Technical Specification:
Maximum working voltage:
DC1000V
Rated Current :
30A
Flame class:
UL94-V0
Pollution degree:
2
Contact resistance:
≤5mmΩ
Shell Protection degree:
IP67
Specification of Connecting Line:
4mm
2
Ambient temperature range:
-40~+85°C
Safety Level:
classII
Insertion force:
≤60N
Withdrawal force:≥60N
≥60N
Cable length:
90cm
Main
Features:
With excellent aging resistance and UV endurance, it can be used in harsh environment.
The cable connection adopts means of rivet and lock.
It does not need extra instruments for the removal of plugs and removal will not cause any harm to plugs.
Rated Current : 30A
Flame class: UL94-V0
Pollution degree: 2
PV-BRT-8201 PV Connector
Products Introduction
:
PV-BRT-8201 PV Connector adopts crowned spring and has automatic locking mechanism on plugs to ensure solid connection between contact and connector. Connector plug (negative) is equipped with buttons that are symmetric at the bottom to ensure the convenience of removal. Such removal does not need any extra instruments, therefore, can make sure that the plug is intact. This advanced product, with easy usage, is more convenient to use than similar products. In addition, the product also confirms to DIN V VDE V 0126-3.
Main Technical Specification:
Maximum working voltage:
DC1000V
Rated Current :
30A
Flame class:
UL94-V0
Pollution degree:
2
Contact resistance:
≤5mmΩ
Shell Protection degree:
IP67
Specification of Connecting Line:
4mm
2
Ambient temperature range:
-40~+85°C
Safety Level:
classII
Insertion force:
≤60N
Withdrawal force:≥60N
≥60N
Cable length:
90cm
Main
Features:
With excellent aging resistance and UV endurance, it can be used in harsh environment.
The cable connection adopts means of rivet and lock.
It does not need extra instruments for the removal of plugs and removal will not cause any harm to plugs.
PV clamp
PV clamp,pv clip,solar clamp.
material: Aluminum alloy
size : international standard.
treatment:oxygenation
PV clamp,pv clip,solar clamp.
material: Aluminum alloy
size : international standard.
treatment:oxygenation
Features
1) Reliable.
2) Low cost
3) Easy installed
slope roof solar bracket
stainless steel tile roof hook
vertical installation solar racking system
slope roof solar bracket stainless steel tile roof hook vertical installation
high qualify aluminium and stainless steel
Competitive price
This solar mounting kit is designed for both sloping roof and flat roof. It is also suitable for mounting popular brand of panels Such as Suntech, Yingli, Eging, Sunpower, Sharp and others
We also provide other components for complete PV solar integrated system and install support system.
material: Aluminum alloy
size : international standard.
treatment:oxygenation
PV clamp,pv clip,solar clamp.
material: Aluminum alloy
size : international standard.
treatment:oxygenation
Features
1) Reliable.
2) Low cost
3) Easy installed
slope roof solar bracket
stainless steel tile roof hook
vertical installation solar racking system
slope roof solar bracket stainless steel tile roof hook vertical installation
high qualify aluminium and stainless steel
Competitive price
This solar mounting kit is designed for both sloping roof and flat roof. It is also suitable for mounting popular brand of panels Such as Suntech, Yingli, Eging, Sunpower, Sharp and others
We also provide other components for complete PV solar integrated system and install support system.
Thursday, July 14, 2011
PV combiner box
PV combiner box 6 strings
Professional safety security
PHOENIX lightning arresters
ABB DC circuit breaker
Customizable sizes
Combiner box 6 strings
PV DC Combiner Box
To minimize the cable distance between solar modules and inverters, facilitating maintenance and improving reliability, it is a general practice to install a DC combining device between solar modules and inverters for a large scale grid connected PV power system. By PV combiner box, different solar PV array strings shall be converged, then connected to the inverter through lightning arrester and DC circuit breakers; such way far more increasing the system safety, as well reducing system installation time and making easy maintenance.
Features
Professional safety security, Easy installation & maintenance
Outdoor design, weather proof
Wide DC voltage input, Max PV array DC1000V
Each string protect by high voltage PV special DC fuse
World famous PHOENIX high voltage PV special lightning arresters
ABB DC circuit breaker used for DC output terminal
Full range of model, customizable and meets various requirements
Technical Specifications
Model
Unit
JNHL06
JNHL08
JNHL12
JNHL16
PV Array Max. Voltage
Vdc
200~1000
Max. numbers of Input
6
8
12
16
Max. DC Current for each String
A
5A/10A/12A/15A
Output Terminal Type
PG21
PG21
PG21
PG21
Ingress Protection
IP65
IP65
IP65
IP65
Dimensions
Mm
500×400×175
550×500×175
600×500×175
650×500×175
Operating Temperature
°C
-25~+60°C
-25~+60°C
-25~+60°C
-25~+60°C
Relative Humidity
%
0~99%
0~99%
0~99%
0~99%
Standard Configuration
DC Circuit Breaker
Yes
SPD
Yes
Optional Components
Communication
RS485
solar combiner baox, solar juction box, solar module combiner box, solar cell combiner box, solar array combinber box, water proof juction box
Professional safety security
PHOENIX lightning arresters
ABB DC circuit breaker
Customizable sizes
Combiner box 6 strings
PV DC Combiner Box
To minimize the cable distance between solar modules and inverters, facilitating maintenance and improving reliability, it is a general practice to install a DC combining device between solar modules and inverters for a large scale grid connected PV power system. By PV combiner box, different solar PV array strings shall be converged, then connected to the inverter through lightning arrester and DC circuit breakers; such way far more increasing the system safety, as well reducing system installation time and making easy maintenance.
Features
Professional safety security, Easy installation & maintenance
Outdoor design, weather proof
Wide DC voltage input, Max PV array DC1000V
Each string protect by high voltage PV special DC fuse
World famous PHOENIX high voltage PV special lightning arresters
ABB DC circuit breaker used for DC output terminal
Full range of model, customizable and meets various requirements
Technical Specifications
Model
Unit
JNHL06
JNHL08
JNHL12
JNHL16
PV Array Max. Voltage
Vdc
200~1000
Max. numbers of Input
6
8
12
16
Max. DC Current for each String
A
5A/10A/12A/15A
Output Terminal Type
PG21
PG21
PG21
PG21
Ingress Protection
IP65
IP65
IP65
IP65
Dimensions
Mm
500×400×175
550×500×175
600×500×175
650×500×175
Operating Temperature
°C
-25~+60°C
-25~+60°C
-25~+60°C
-25~+60°C
Relative Humidity
%
0~99%
0~99%
0~99%
0~99%
Standard Configuration
DC Circuit Breaker
Yes
SPD
Yes
Optional Components
Communication
RS485
solar combiner baox, solar juction box, solar module combiner box, solar cell combiner box, solar array combinber box, water proof juction box
PV connector PV-BTBL0601
PV connector PV-BTBL0601
1.Connector and cable assembly designed for PV solar module.
2.Secure and quick interconnection
PV connector PV-BTBL0601
Description:
The products have been approved by TUV and in the process of applying to UL authorization.
Technical data:
Rated voltage: 1000V
Rated current: 16A
Temperature range: -40°C~+85°C
Insulation material: PPO
Contact material: Copper, tin plated
Waterproof Degree: IP65
1.Connector and cable assembly designed for PV solar module.
2.Secure and quick interconnection
PV connector PV-BTBL0601
Description:
The products have been approved by TUV and in the process of applying to UL authorization.
Technical data:
Rated voltage: 1000V
Rated current: 16A
Temperature range: -40°C~+85°C
Insulation material: PPO
Contact material: Copper, tin plated
Waterproof Degree: IP65
PV connector
PV connector:The product has got the latest Germany TUV certificate.
PV Connector Main Technical Specification:
Rated Voltage: DC1000V
Rated Current Tj:30A
Ambient Temperature: -40°C~+85°C
Protection Calss: ClassII
Protection Degree: IP67
Rated Connecting Capacity: 2.5, 4, 6mm
2
It's MC4 compatible
PV Connector Main Technical Specification:
Rated Voltage: DC1000V
Rated Current Tj:30A
Ambient Temperature: -40°C~+85°C
Protection Calss: ClassII
Protection Degree: IP67
Rated Connecting Capacity: 2.5, 4, 6mm
2
It's MC4 compatible
PV ground mounting system
1.Easy installioon
2.Diversified Application
3.High accuracy
4.Good compatibility
Solar ground mounting system
Ground mounting system has developed generally used for open ground. Professional Design mountings make the installation easy and fast. It has an excellent performance among the same products in solar panels mounting business, with reasonable design, high anti-wind, adjustable angles, using minimal material, lowest cost and easy installation.
Features:
Easy installioon
Diversified Application
High accuracy
Good compatibility
Choice Quality
Maximum lifespan,
Technical parameters
Installation Site: outdoor
Installation Angle: accordingly
Building height: accordingly
Wind Load: 60m/s
Snow Load: 1.4KN/m2
PV Module: Framed or not framed
Module Orientation: Horizontal or vertical
Module with: Any
Standard: AS/NZS 1170 and other international standards
Support Rail: Extrude aluminum
Color: Natural
Warranty: 10 years
2.Diversified Application
3.High accuracy
4.Good compatibility
Solar ground mounting system
Ground mounting system has developed generally used for open ground. Professional Design mountings make the installation easy and fast. It has an excellent performance among the same products in solar panels mounting business, with reasonable design, high anti-wind, adjustable angles, using minimal material, lowest cost and easy installation.
Features:
Easy installioon
Diversified Application
High accuracy
Good compatibility
Choice Quality
Maximum lifespan,
Technical parameters
Installation Site: outdoor
Installation Angle: accordingly
Building height: accordingly
Wind Load: 60m/s
Snow Load: 1.4KN/m2
PV Module: Framed or not framed
Module Orientation: Horizontal or vertical
Module with: Any
Standard: AS/NZS 1170 and other international standards
Support Rail: Extrude aluminum
Color: Natural
Warranty: 10 years
156*156mm mono crystalline silicon solar cell
156*156mm mono crystalline silicon solar cell with high efficiency,
156*156mm mono crystalline silicon solar cell
1
Conductive Type:
P-Type
2
Shape:Square
3
Dopant: Boron
4
Dimension:
156
±
0.5mm
5.
Thickness:
200
±
20um
6.
Resistivity:
1-3
Ω
.cm
7.
Life time:
≥
10us
8.
Saw Mark:<
15um
9.
TTV:
≤
30 um
10.
Warp:
≤
30 um
11.
Oxygen concentration:
≤
1.0X1018at/cm3
12.
Carbon concentration:
≤
5.0X1016at/cm3
13.
Cracks
,
Breakage and holes are not permitted . Surface is clean and without spots.
156*156mm mono crystalline silicon solar cell
1
Conductive Type:
P-Type
2
Shape:Square
3
Dopant: Boron
4
Dimension:
156
±
0.5mm
5.
Thickness:
200
±
20um
6.
Resistivity:
1-3
Ω
.cm
7.
Life time:
≥
10us
8.
Saw Mark:<
15um
9.
TTV:
≤
30 um
10.
Warp:
≤
30 um
11.
Oxygen concentration:
≤
1.0X1018at/cm3
12.
Carbon concentration:
≤
5.0X1016at/cm3
13.
Cracks
,
Breakage and holes are not permitted . Surface is clean and without spots.
PV junction box
high quality,wide temperature range,anti-aging and UV resistant.
TUV certified.
Rating Voltage
1000VDC
Rating Current
4A
Contact Resistance
≤0.5mΩ
Safety Class
Class 2
Insulation Material
PPO
Temperature Range
-40°C ~ +85°C
Protection Class
IP65
TUV certified.
Rating Voltage
1000VDC
Rating Current
4A
Contact Resistance
≤0.5mΩ
Safety Class
Class 2
Insulation Material
PPO
Temperature Range
-40°C ~ +85°C
Protection Class
IP65
PV middle clamp
PV middle clamp,pv clip,solar clamp.
material: Aluminum alloy
size : international standard.
treatment:oxygenation 12-15 um
PV middle clamp,pv clip,solar clamp.
material: Aluminum alloy
size : international standard.
treatment:oxygenation 12-15 um
size :40mm,50mmm,70mm,80mm available
Features
1) Reliable.
2) Low cost
3) Easy installed
slope roof solar bracket
stainless steel tile roof hook
vertical installation solar racking system
slope roof solar bracket stainless steel tile roof hook vertical installation
high qualify aluminium and stainless steel
Competitive price
This solar mounting kit is designed for both sloping roof and flat roof. It is also suitable for mounting popular brand of panels Such as Suntech, Yingli, Eging, Sunpower, Sharp and others
We also provide other components for complete PV solar integrated system and install support system.
material: Aluminum alloy
size : international standard.
treatment:oxygenation 12-15 um
PV middle clamp,pv clip,solar clamp.
material: Aluminum alloy
size : international standard.
treatment:oxygenation 12-15 um
size :40mm,50mmm,70mm,80mm available
Features
1) Reliable.
2) Low cost
3) Easy installed
slope roof solar bracket
stainless steel tile roof hook
vertical installation solar racking system
slope roof solar bracket stainless steel tile roof hook vertical installation
high qualify aluminium and stainless steel
Competitive price
This solar mounting kit is designed for both sloping roof and flat roof. It is also suitable for mounting popular brand of panels Such as Suntech, Yingli, Eging, Sunpower, Sharp and others
We also provide other components for complete PV solar integrated system and install support system.
PV module junction box
Rated Voltage: DC 1000V
Rated Current: 15A
Rated impulse Votage: 8000V
Pollution Degree: 2
Degree of Protection: IP65
Ambient Temperature : -40°c --85°c
Rated connecting Capacity: 4mm²
TYPV-BM201 PV Junction Box provides users safe, fast and reliable connectivity solutions, such junction box is applicable to connect the combination of solar panel. Compared with other similar products, its technology is more advanced, performance is more reliable, installation is more efficient
Rated Current: 15A
Rated impulse Votage: 8000V
Pollution Degree: 2
Degree of Protection: IP65
Ambient Temperature : -40°c --85°c
Rated connecting Capacity: 4mm²
TYPV-BM201 PV Junction Box provides users safe, fast and reliable connectivity solutions, such junction box is applicable to connect the combination of solar panel. Compared with other similar products, its technology is more advanced, performance is more reliable, installation is more efficient
PV module junction box
Rated Votage:DC1000V
Rated Current:3A
Rated Impulse Voltage:8000V
Pollution Degree:2
Degree of Protection:IP65
Ambient temperature : -40°c--85°c
Rated Connecting Capacity: 2.5mm²
TYPV-BS201 PV Junction Box provides users safe, fast and reliable connectivity solutions, such junction box is applicable to connect the combination of solar panel. Compared with other similar products, its technology is more advanced, performance is more reliable, installation is more efficient.
Rated Current:3A
Rated Impulse Voltage:8000V
Pollution Degree:2
Degree of Protection:IP65
Ambient temperature : -40°c--85°c
Rated Connecting Capacity: 2.5mm²
TYPV-BS201 PV Junction Box provides users safe, fast and reliable connectivity solutions, such junction box is applicable to connect the combination of solar panel. Compared with other similar products, its technology is more advanced, performance is more reliable, installation is more efficient.
PV modules
1. Backed by 25 year limited power warranty
2. 5 year workmanship warranty
1. A rigid frame with integrated water drainage holes
2. Frame corners-no screw to ever come loose
3. Sealed junction box seldom needs field maintenance
2. 5 year workmanship warranty
1. A rigid frame with integrated water drainage holes
2. Frame corners-no screw to ever come loose
3. Sealed junction box seldom needs field maintenance
PV mounting system Wind-stream
PV mounting system:
Suitable for flat roofs,especially for bituminous and membrane roofs with limited load bearing capacity.
PV mounting system:
VRLC5 is designed for use of outside or flat roof installation of PV system, its advantage is no connection with the roof, just put on. For some roof with limited load bearing capacity, this may be the only way to put the PV system on it. In the bottom aluminium rail consists of a mesh structure, there stainless steel legs is jointed on it, and reflector sheets are fixed on, it can stick firmly to the roof under wind load. And the bottom mesh type structure forms an entirety structure.
Features:
1. Designed for roofs with limited load bearing capicity.
2. No unnecessary load such as pouring weight on the roof.
3. No mechanical joining with roof, no leaking problem.
4. Adopt Aluminium and stainless-steel parts to be highly corrosion-resistant.
5. Good performance demonstrated by the wind tunnel test at Technical University of Munich.
Technical Data
Module type
Framed module
Module arrangment
2 rows, vertical
Installation angle
On request
Ground fixation type
On request
Load bearing
Made on request
Range of module arrangement
Length≤50m
Module fixation
Slide-in aluminium rail with slot
Material of cross beam
Al 6063T5
Material of stand pole
Carbon steel, hot galvanized
Color
Silvery white
Warranty
10 years
Suitable for flat roofs,especially for bituminous and membrane roofs with limited load bearing capacity.
PV mounting system:
VRLC5 is designed for use of outside or flat roof installation of PV system, its advantage is no connection with the roof, just put on. For some roof with limited load bearing capacity, this may be the only way to put the PV system on it. In the bottom aluminium rail consists of a mesh structure, there stainless steel legs is jointed on it, and reflector sheets are fixed on, it can stick firmly to the roof under wind load. And the bottom mesh type structure forms an entirety structure.
Features:
1. Designed for roofs with limited load bearing capicity.
2. No unnecessary load such as pouring weight on the roof.
3. No mechanical joining with roof, no leaking problem.
4. Adopt Aluminium and stainless-steel parts to be highly corrosion-resistant.
5. Good performance demonstrated by the wind tunnel test at Technical University of Munich.
Technical Data
Module type
Framed module
Module arrangment
2 rows, vertical
Installation angle
On request
Ground fixation type
On request
Load bearing
Made on request
Range of module arrangement
Length≤50m
Module fixation
Slide-in aluminium rail with slot
Material of cross beam
Al 6063T5
Material of stand pole
Carbon steel, hot galvanized
Color
Silvery white
Warranty
10 years
PV mounting system--Tiled in-roof
PV mounting system:
Suit for installation of polisilicon module in flush type.
No worry about leaking problem.
PV mounting system:
VRTI2 system is suitable for installation of polisilicon module in flush type. The bottom frame uses special rail that has draining groove. After fixation all the seams between modules are sealed by adhesive rubber ribbon. Several waterproof measures are used, no worry about leaking problem.
Features:
1.The specially designed rail has draining groove to let rain water flow down.
2. All the seams between modules are sealed by adhesive rubber ribbon.
3. There are upper flashing and side flushing on the whole system, made of stainless steel.
Technical characteristics:
Installation site:
outdoor
Installation angle
it is based on customers’ requirements
Installation height
it is ased on customers’ requirements
Wind resistance
60m/s
Snow load
14KN/m
2
Solar panel type
with or without frame
Components arrangement
horizontal or vertical
International criteria
eligible
Support track
aluminum alloy extrusion
Color:
natural
Quality warranty
10 years
Suit for installation of polisilicon module in flush type.
No worry about leaking problem.
PV mounting system:
VRTI2 system is suitable for installation of polisilicon module in flush type. The bottom frame uses special rail that has draining groove. After fixation all the seams between modules are sealed by adhesive rubber ribbon. Several waterproof measures are used, no worry about leaking problem.
Features:
1.The specially designed rail has draining groove to let rain water flow down.
2. All the seams between modules are sealed by adhesive rubber ribbon.
3. There are upper flashing and side flushing on the whole system, made of stainless steel.
Technical characteristics:
Installation site:
outdoor
Installation angle
it is based on customers’ requirements
Installation height
it is ased on customers’ requirements
Wind resistance
60m/s
Snow load
14KN/m
2
Solar panel type
with or without frame
Components arrangement
horizontal or vertical
International criteria
eligible
Support track
aluminum alloy extrusion
Color:
natural
Quality warranty
10 years
PV mounting system
PV mounting system
High strength 6061T6 rail,
High quality 304 stainless steel hardware
PV mounting system
Special design for easy install
High strength 6061T6 rail,
High quality 304 stainless steel hardware
warranty: 10 years
competitive price
high quality
prompt delivery
easy installation
With AS/NZS 1170 and other international standard
Engineering Spec
Installation Site: Flat/Tilt roof;
Installation Angle: up to 60
o
Wind Load: up to 60m/s
Snow Load: up to 1.4KN/m
2
Applicable Module: Any brand of solar power panel module
Module Orientation: Horizontal/ Vertical
Module Width: Any
Code Compliance: AS/NZS1170 and other international standards
Material: Aluminum Alloy 6061T6, Stainless Steel 304
Color: Silver Gray; Customized
Warranty: 10 years
High strength 6061T6 rail,
High quality 304 stainless steel hardware
PV mounting system
Special design for easy install
High strength 6061T6 rail,
High quality 304 stainless steel hardware
warranty: 10 years
competitive price
high quality
prompt delivery
easy installation
With AS/NZS 1170 and other international standard
Engineering Spec
Installation Site: Flat/Tilt roof;
Installation Angle: up to 60
o
Wind Load: up to 60m/s
Snow Load: up to 1.4KN/m
2
Applicable Module: Any brand of solar power panel module
Module Orientation: Horizontal/ Vertical
Module Width: Any
Code Compliance: AS/NZS1170 and other international standards
Material: Aluminum Alloy 6061T6, Stainless Steel 304
Color: Silver Gray; Customized
Warranty: 10 years
PV mounting-VRSH2 trapezoidal roof mounting system
PV mounting:
Suit for installation on big size roof of workshop or storehouse.
Accept framed or thin film modules of any size.
PV mounting:
VRSH2 system is designed for big size roof of workshop or storehouse, the fixation of rail is specially
designed, flexible for installation. The advanced design makes minimum parts number, and fast fixation. It can accept framed or thin film modules of any size.
Features:
1.Special designed fixation method of rail, easy to install.
2. Minimum parts number, easy installation.
3. The aluminium and stainless steel parts are high quality, service life is over 10 years.
Technical Data
Module type
Framed module
Module arrangment
2 rows, vertical
Installation angle
On request
Ground fixation type
On request
Load bearing
Made on request
Range of module arrangement
Length≤50m
Module fixation
Slide-in aluminium rail with slot
Material of cross beam
Al 6063T5
Material of stand pole
Carbon steel, hot galvanized
Color
Silvery white
Warranty
10 years
Suit for installation on big size roof of workshop or storehouse.
Accept framed or thin film modules of any size.
PV mounting:
VRSH2 system is designed for big size roof of workshop or storehouse, the fixation of rail is specially
designed, flexible for installation. The advanced design makes minimum parts number, and fast fixation. It can accept framed or thin film modules of any size.
Features:
1.Special designed fixation method of rail, easy to install.
2. Minimum parts number, easy installation.
3. The aluminium and stainless steel parts are high quality, service life is over 10 years.
Technical Data
Module type
Framed module
Module arrangment
2 rows, vertical
Installation angle
On request
Ground fixation type
On request
Load bearing
Made on request
Range of module arrangement
Length≤50m
Module fixation
Slide-in aluminium rail with slot
Material of cross beam
Al 6063T5
Material of stand pole
Carbon steel, hot galvanized
Color
Silvery white
Warranty
10 years
PV panel with IEC/CE certificates
PV solar module
1. Bankable,TUV,CE,UL,Kiers
2. 17.5% efficiency
3. complete value chain (capacity:300MW/year)
PV panel
1) Use of premium quality raw material from leading world-wide suppliers
2) Strict quality control and power classification of modules
3) Ready to use with junction box, cabling and connectors
4) Be resistant to atmospheric exposure and effects of delamination.
Specifications:
1) Peak power (Wp): 180Wp
2) Max. power voltage (Vmp): 36.2V
3) Max. power current (Imp): 4.97A
4) Open circuit voltage (Voc): 44.2V
5) Short circuit current (Isc): 5.36A
6) Max. system voltage: DC 1000V
7) Dimensions: 1582mm*809mm*50mm.
Outer packing:
Carton
Pmax
160W
165W
170W
175W
180W
185W
Voc
43.4V
43.6V
44.2V
44.2V
44.2V
44.6V
Isc
5.09A
5.10A
5.15A
5.25A
5.36A
5.60A
Vmp
34.5V
35.4V
35.6V
35.8V
36.2V
37.0V
Imp
4.64A
4.66A
4.78A
4.89A
4.97A
5.00A
Tolerance
±3%
Fuse rating
10A
Maximum system voltage
DC1000V
Dimension
1582*809*50mm/1580*808*35mm
Cell type
125*125mm/72 mono-crystalline cells
Net weight
16.5KG
Mechanical load
5400Pa
NOCT
47±3°C
Operating temperature
-40 to 85°C
1. Bankable,TUV,CE,UL,Kiers
2. 17.5% efficiency
3. complete value chain (capacity:300MW/year)
PV panel
1) Use of premium quality raw material from leading world-wide suppliers
2) Strict quality control and power classification of modules
3) Ready to use with junction box, cabling and connectors
4) Be resistant to atmospheric exposure and effects of delamination.
Specifications:
1) Peak power (Wp): 180Wp
2) Max. power voltage (Vmp): 36.2V
3) Max. power current (Imp): 4.97A
4) Open circuit voltage (Voc): 44.2V
5) Short circuit current (Isc): 5.36A
6) Max. system voltage: DC 1000V
7) Dimensions: 1582mm*809mm*50mm.
Outer packing:
Carton
Pmax
160W
165W
170W
175W
180W
185W
Voc
43.4V
43.6V
44.2V
44.2V
44.2V
44.6V
Isc
5.09A
5.10A
5.15A
5.25A
5.36A
5.60A
Vmp
34.5V
35.4V
35.6V
35.8V
36.2V
37.0V
Imp
4.64A
4.66A
4.78A
4.89A
4.97A
5.00A
Tolerance
±3%
Fuse rating
10A
Maximum system voltage
DC1000V
Dimension
1582*809*50mm/1580*808*35mm
Cell type
125*125mm/72 mono-crystalline cells
Net weight
16.5KG
Mechanical load
5400Pa
NOCT
47±3°C
Operating temperature
-40 to 85°C
156*156mm mono silicon wafer
The wafer used in manufacturing solar cell tablets. The specification: 125mm*125mm, 156mm*156mm
Material: Silicon--CZ
Size(mm) : 125×125 / 156×156
Type/Dopant: P-Type/Boron
Orientation : <100>
Resistivity(Ω.cm) 0.5---6
RRG(%): P-Type<15%
Oxygen content(at cm
-3
) : ≤1×10
18
Carbon content(at cm
-3
) : ≤5×10
16
Thickness & tolerance(um): According to the customer
TTV(um): ≤30 / Or according to the customer
BOW(um): ≤40 / Or according to the customer
Material: Silicon--CZ
Size(mm) : 125×125 / 156×156
Type/Dopant: P-Type/Boron
Orientation : <100>
Resistivity(Ω.cm) 0.5---6
RRG(%): P-Type<15%
Oxygen content(at cm
-3
) : ≤1×10
18
Carbon content(at cm
-3
) : ≤5×10
16
Thickness & tolerance(um): According to the customer
TTV(um): ≤30 / Or according to the customer
BOW(um): ≤40 / Or according to the customer
PV panel
PV panel, solar PV module, PV solar panel:
1.Solar panel from 3-280W;
2. High efficient transfer rate with competitive price.
PV panel, solar PV module, PV solar panel:
1. Backed by 25 years limited power warranty.
2. 2 years workmanship warranty.
3. A rigid frame with integrated water drainage holes.
4. Frame corners-no screw to ever come loose
5. Sealed junction box seldom needs field maintenance
1.Solar panel from 3-280W;
2. High efficient transfer rate with competitive price.
PV panel, solar PV module, PV solar panel:
1. Backed by 25 years limited power warranty.
2. 2 years workmanship warranty.
3. A rigid frame with integrated water drainage holes.
4. Frame corners-no screw to ever come loose
5. Sealed junction box seldom needs field maintenance
PV power ground column bracket system
PV power column bracketet
1) guarantee10-year
2)Prompt delivery and price reasonable
3)certification:CE ROHS
PV power column bracket
1) All the support structural elements are hot dipped galvanized to guarantee the lifetime of support.
2) Adopt high-quality steel pipe and other excellent section bars to ensure sufficient strength of support.
3) Installation area of solar panel components in design is 2.5~100m2.
4) Wind load resistance of support in design is 216km/h.
5) The ground support system which is convenient for installation and maintenance free has developed into the general solar panel installation system suitable for open ground outdoor. The unique innovative aluminum alloy track, Z-shaped card and pipe cap can be used to connect multiple units conveniently and simply to meet the actual requirements on various grounds for installation. It is suitable for installation and application of solar panels with and without frame and is mainly used in large-scale solar power station with the advantages of low cost, rapid installation and stability.
6)Usage:Solar module installation to support the solar panel modules
Technical characteristics:
Installation site:
outdoor
Installation angle
it is based on customers’ requirements
Installation height
it is ased on customers’ requirements
Wind resistance
60m/s
Snow load
14KN/m
2
Solar panel type
with or without frame
Components arrangement
horizontal or vertical
International criteria
eligible
Support track
aluminum alloy extrusion
Color:
natural
Quality warranty
10 years
1) guarantee10-year
2)Prompt delivery and price reasonable
3)certification:CE ROHS
PV power column bracket
1) All the support structural elements are hot dipped galvanized to guarantee the lifetime of support.
2) Adopt high-quality steel pipe and other excellent section bars to ensure sufficient strength of support.
3) Installation area of solar panel components in design is 2.5~100m2.
4) Wind load resistance of support in design is 216km/h.
5) The ground support system which is convenient for installation and maintenance free has developed into the general solar panel installation system suitable for open ground outdoor. The unique innovative aluminum alloy track, Z-shaped card and pipe cap can be used to connect multiple units conveniently and simply to meet the actual requirements on various grounds for installation. It is suitable for installation and application of solar panels with and without frame and is mainly used in large-scale solar power station with the advantages of low cost, rapid installation and stability.
6)Usage:Solar module installation to support the solar panel modules
Technical characteristics:
Installation site:
outdoor
Installation angle
it is based on customers’ requirements
Installation height
it is ased on customers’ requirements
Wind resistance
60m/s
Snow load
14KN/m
2
Solar panel type
with or without frame
Components arrangement
horizontal or vertical
International criteria
eligible
Support track
aluminum alloy extrusion
Color:
natural
Quality warranty
10 years
PV power submersible water pump
2480 series submersible pumps run directly off solar panels (PV direct) and do not require batteries.
Solar Submersible Water Pump
2480
series submersible pumps run directly off solar panels (PV direct) and do not require batteries. It is used mostly for pumping from wells. With flow 45 litre per minute and Vertical lift from 5 to 100 meter, it is great for livestock watering, irrigation, pond, open tank, remote homes and cabins. People use it to store the water in a holding tank.The effect -water when you need it- with less cost and less complexity.
Features:
l Long -life 24 VDC operation
l For 4" wells or larger
l Corrosion-proof housing with stainless-steel fasteners
l Runs dry without damage
l 50 mesh stainless steel inlet screen
Specification
Motor Voltage
Flow
Intake
Outlet
Protection
Rotation speed
24V
45L/min
76mm
32mm
IP68
18000(rpm)
Model
Vertical Lift
Motor Current
(Amp)
Motor Power
/Watts
Peak Panel
Power/ Watts
Meter
Feet
A2480-5
5
16
2.5
60
80
A2480-10
10
32
5
120
160
A2480-15
15
48
7.5
180
240
A2480-20
20
64
10
240
320
A2480-25
25
80
12.5
300
400
A2480-30
30
96
15
360
480
A2480-35
35
112
17.5
420
560
A2480-40
40
128
20
480
640
A2480-45
45
144
22.5
540
700
A2480-50
50
160
25
600
800
A2480-55
55
176
27.5
660
880
A2480-60
60
192
30
720
960
A2480-65
65
208
32.5
780
1040
A2480-70
70
224
35
840
1120
A2480-75
75
240
37.5
900
1120
A2480-80
80
256
40
960
1280
A2480-85
85
272
42.5
1020
1360
A2480-90
90
288
45
1080
1400
A2480-95
95
304
47.5
1140
1500
A2480-100
100
320
50
1200
1560
Solar Submersible Water Pump
2480
series submersible pumps run directly off solar panels (PV direct) and do not require batteries. It is used mostly for pumping from wells. With flow 45 litre per minute and Vertical lift from 5 to 100 meter, it is great for livestock watering, irrigation, pond, open tank, remote homes and cabins. People use it to store the water in a holding tank.The effect -water when you need it- with less cost and less complexity.
Features:
l Long -life 24 VDC operation
l For 4" wells or larger
l Corrosion-proof housing with stainless-steel fasteners
l Runs dry without damage
l 50 mesh stainless steel inlet screen
Specification
Motor Voltage
Flow
Intake
Outlet
Protection
Rotation speed
24V
45L/min
76mm
32mm
IP68
18000(rpm)
Model
Vertical Lift
Motor Current
(Amp)
Motor Power
/Watts
Peak Panel
Power/ Watts
Meter
Feet
A2480-5
5
16
2.5
60
80
A2480-10
10
32
5
120
160
A2480-15
15
48
7.5
180
240
A2480-20
20
64
10
240
320
A2480-25
25
80
12.5
300
400
A2480-30
30
96
15
360
480
A2480-35
35
112
17.5
420
560
A2480-40
40
128
20
480
640
A2480-45
45
144
22.5
540
700
A2480-50
50
160
25
600
800
A2480-55
55
176
27.5
660
880
A2480-60
60
192
30
720
960
A2480-65
65
208
32.5
780
1040
A2480-70
70
224
35
840
1120
A2480-75
75
240
37.5
900
1120
A2480-80
80
256
40
960
1280
A2480-85
85
272
42.5
1020
1360
A2480-90
90
288
45
1080
1400
A2480-95
95
304
47.5
1140
1500
A2480-100
100
320
50
1200
1560
PV ribbon
1. Precision dimension
2. Uniform plating thickness
3. Good solider ability
4. Customer made specification
PV Ribbon Wire has been developed for use in the solar module manufacturers .
1. PV Ribbon Material Cu99.99%
2. Plating thickness 0.015 ~ 0.03 mm
3. Visual 1). There shall be no flows.
2). The surface shall be uniformly lustrous hue.
3). The surface shall be free from thick
4. Dimensions: Thickness: 0.10 – 0.30 mm
Width : 1.5 – 10.0 mm
5. Characteristics
Coating process: Hot-dip tinning
Coating alloys: Sn / In / Ag / X
Tensile: Extra soft, < 235 MPa
Elongation: > 30 %
6. Physical Characteristic
Alloy Designation
Melting Point
Specific Gravity
Sn / In / Ag / X
175°C
7.8g/cm
3
7. Solderability
Item
Specification
Test Methods
Spread Factor
>93%
JIS Z3197-86
8. Recommended temperature of soldering iron tip : 280~320°C
( According to different thickness, adjust the suitable temperature of soldering )
9. Quality
The Flux should be compounded and processed in such a manner as to be uniform in quality and
should be free from deleterious material and other details that will after life serviceability or appearance.
10. Visual Inspection
The visual inspection is using perception to inspect the PV Ribbon Wire. The important
aspect of this inspection is the coated copper must free from:
1).Whether or not there is any flaw is checked.
2).Whether or not its surface has uniform lustrous hue be inspected.
3).Whether or not its surface free from thick.
11. Coating Thickness Test
The measurement to PV Ribbon Wire is using the external micrometer (0. 001mm)or its equivalents.
The test piece of about 10cm long shall be taken and the OD of the wire shall be measured at
3 points.Each point shall be measured 2 times
12. Thickness Of Solder Coated Wire
After the 3 points of wire be measured,dip the test piece into nitric acid for about 5 minutes,the diameter of core wire shall be measured. One half of the two measurements will give the thickness of solder coated wire.
2. Uniform plating thickness
3. Good solider ability
4. Customer made specification
PV Ribbon Wire has been developed for use in the solar module manufacturers .
1. PV Ribbon Material Cu99.99%
2. Plating thickness 0.015 ~ 0.03 mm
3. Visual 1). There shall be no flows.
2). The surface shall be uniformly lustrous hue.
3). The surface shall be free from thick
4. Dimensions: Thickness: 0.10 – 0.30 mm
Width : 1.5 – 10.0 mm
5. Characteristics
Coating process: Hot-dip tinning
Coating alloys: Sn / In / Ag / X
Tensile: Extra soft, < 235 MPa
Elongation: > 30 %
6. Physical Characteristic
Alloy Designation
Melting Point
Specific Gravity
Sn / In / Ag / X
175°C
7.8g/cm
3
7. Solderability
Item
Specification
Test Methods
Spread Factor
>93%
JIS Z3197-86
8. Recommended temperature of soldering iron tip : 280~320°C
( According to different thickness, adjust the suitable temperature of soldering )
9. Quality
The Flux should be compounded and processed in such a manner as to be uniform in quality and
should be free from deleterious material and other details that will after life serviceability or appearance.
10. Visual Inspection
The visual inspection is using perception to inspect the PV Ribbon Wire. The important
aspect of this inspection is the coated copper must free from:
1).Whether or not there is any flaw is checked.
2).Whether or not its surface has uniform lustrous hue be inspected.
3).Whether or not its surface free from thick.
11. Coating Thickness Test
The measurement to PV Ribbon Wire is using the external micrometer (0. 001mm)or its equivalents.
The test piece of about 10cm long shall be taken and the OD of the wire shall be measured at
3 points.Each point shall be measured 2 times
12. Thickness Of Solder Coated Wire
After the 3 points of wire be measured,dip the test piece into nitric acid for about 5 minutes,the diameter of core wire shall be measured. One half of the two measurements will give the thickness of solder coated wire.
PV ribbon
1. Precision dimension
2. Uniform plating thickness
3. Good solider ability
4. Customer made specification
PV Ribbon Wire has been developed for use in the solar module manufacturers .
1. PV Ribbon Material Cu99.99%
2. Plating thickness 0.015 ~ 0.03 mm
3. Visual 1). There shall be no flows.
2). The surface shall be uniformly lustrous hue.
3). The surface shall be free from thick
4. Dimensions: Thickness: 0.10 – 0.30 mm
Width : 1.5 – 10.0 mm
5. Characteristics
Coating process: Hot-dip tinning
Coating alloys: Sn / In / Ag / X
Tensile: Extra soft, < 235 MPa
Elongation: > 30 %
6. Physical Characteristic
Alloy Designation
Melting Point
Specific Gravity
Sn / In / Ag / X
175°C
7.8g/cm
3
7. Solderability
Item
Specification
Test Methods
Spread Factor
>93%
JIS Z3197-86
8. Recommended temperature of soldering iron tip : 280~320°C
( According to different thickness, adjust the suitable temperature of soldering )
9. Quality
The Flux should be compounded and processed in such a manner as to be uniform in quality and
should be free from deleterious material and other details that will after life serviceability or appearance.
10. Visual Inspection
The visual inspection is using perception to inspect the PV Ribbon Wire. The important
aspect of this inspection is the coated copper must free from:
1).Whether or not there is any flaw is checked.
2).Whether or not its surface has uniform lustrous hue be inspected.
3).Whether or not its surface free from thick.
11. Coating Thickness Test
The measurement to PV Ribbon Wire is using the external micrometer (0. 001mm)or its equivalents.
The test piece of about 10cm long shall be taken and the OD of the wire shall be measured at
3 points.Each point shall be measured 2 times
12. Thickness Of Solder Coated Wire
After the 3 points of wire be measured,dip the test piece into nitric acid for about 5 minutes,the diameter of core wire shall be measured. One half of the two measurements will give the thickness of solder coated wire.
2. Uniform plating thickness
3. Good solider ability
4. Customer made specification
PV Ribbon Wire has been developed for use in the solar module manufacturers .
1. PV Ribbon Material Cu99.99%
2. Plating thickness 0.015 ~ 0.03 mm
3. Visual 1). There shall be no flows.
2). The surface shall be uniformly lustrous hue.
3). The surface shall be free from thick
4. Dimensions: Thickness: 0.10 – 0.30 mm
Width : 1.5 – 10.0 mm
5. Characteristics
Coating process: Hot-dip tinning
Coating alloys: Sn / In / Ag / X
Tensile: Extra soft, < 235 MPa
Elongation: > 30 %
6. Physical Characteristic
Alloy Designation
Melting Point
Specific Gravity
Sn / In / Ag / X
175°C
7.8g/cm
3
7. Solderability
Item
Specification
Test Methods
Spread Factor
>93%
JIS Z3197-86
8. Recommended temperature of soldering iron tip : 280~320°C
( According to different thickness, adjust the suitable temperature of soldering )
9. Quality
The Flux should be compounded and processed in such a manner as to be uniform in quality and
should be free from deleterious material and other details that will after life serviceability or appearance.
10. Visual Inspection
The visual inspection is using perception to inspect the PV Ribbon Wire. The important
aspect of this inspection is the coated copper must free from:
1).Whether or not there is any flaw is checked.
2).Whether or not its surface has uniform lustrous hue be inspected.
3).Whether or not its surface free from thick.
11. Coating Thickness Test
The measurement to PV Ribbon Wire is using the external micrometer (0. 001mm)or its equivalents.
The test piece of about 10cm long shall be taken and the OD of the wire shall be measured at
3 points.Each point shall be measured 2 times
12. Thickness Of Solder Coated Wire
After the 3 points of wire be measured,dip the test piece into nitric acid for about 5 minutes,the diameter of core wire shall be measured. One half of the two measurements will give the thickness of solder coated wire.
PV silicon wafers
solar silicon wafer
1.156mm*156mm mono silicon wafer
2.High qualified
156mm *156mm Single crystalline silicon wafer specification:
NO.
Item
Specification
Unit
1
Conductivity type
P-type
2
thickness
200±20
mm
3
Dimension
156±0.5
mm
4
Resistivity
0.5-3 , 3-6
Ohm.cm
5
lifetime
≥10
μs
6
TTV
≤30
μm
7
Oxygen Content
≤1.0*10
18
atoms/cm
3
8
Carbon Content
≤5.0*10
16
atoms/cm
3
1.156mm*156mm mono silicon wafer
2.High qualified
156mm *156mm Single crystalline silicon wafer specification:
NO.
Item
Specification
Unit
1
Conductivity type
P-type
2
thickness
200±20
mm
3
Dimension
156±0.5
mm
4
Resistivity
0.5-3 , 3-6
Ohm.cm
5
lifetime
≥10
μs
6
TTV
≤30
μm
7
Oxygen Content
≤1.0*10
18
atoms/cm
3
8
Carbon Content
≤5.0*10
16
atoms/cm
3
Subscribe to:
Posts (Atom)