1.Portable solar charging pannel for mobile
2.Solar Panel (mono or multi-crystalline): 5V/45mA
3.Output volt/cu
Portable solar charging pannel for mobile
Specifications
1. Solar Panel : 5.5V/70mA
2. Output volt/current: 5.5V450mA
3. Battery capcity:1300mah
4. Indication: charging and discharging state
5. Protection: reverse current protection circuit integerated to prevent batteries from being discharged.
6. Charging time for the mobile phone: 2-3 hours
7.Charging time for theLithium polymer battery inside using the solar panel: 12 - 14 hours
8.Charging time for the Lithium polymer battery inside using USB charging cablel: 4- 5 hours
9.Constant Volts:4.2 V
11. Packing gift box
12. Net weight40g
Main commponents: as the picture left
1.Solar charger 1PCS
2.Output line1PC
3.Connector:5PCS
(if you need more adapters that didn't show in the list,please advise us!!)
4.USB Charging Cable:1PC
5.Adapter:1pcs
Saturday, July 2, 2011
15W Low price solar portable charger
15W Low price solar portable charger
1.N.W/G.W:7/7.8KG
2.Certificate:CE, ROHS, IEC
3.Product Size:L52.5*W7.5*H36
4.green
15W Low price solar portable charger
Specification
Main Parts
Specification
Parameters
Solar Panel
Mono/polycrystalline
15W(L52.5*W7.5*H36)
Solar Battery
Lithium
12AH
Solar Control System
Controller
10A
Inverter
150W
Control Box
Stainless Steel
Outputs
DC12V, AC86V~260V 50Hz
Charging
By solar panel or by utility power
Loads
Lap-top computers, lamps, and other small electric appliances
Features:
1. High conversion rate, high transmittance rate, high mechanical strength.
2. Good weather fastness, wind and hail resisted.
3. Lightweight, small in size, easy to clean.
4. Anti-moisture, antisepsis, anti-salt fog.
5. No pollution, energy saving, environmental-friendly.
6. Easy installation, safe operation, free maintenance.
Application:
- Remote area, mountainous area, desert area, grassland area, etc.
- Village, Country area, etc.
- Camping, travelling, outdoor activities, etc.
Battery charging for mobile, laptop, lights, camera, TV, VCD, DVD, fan or other electric power tool.
Advantages:
- Simple structure of the system.
- Suitable for living in scattered villages or driving traveling
- Easy, convenient, quick, safe, green
portable solar generator, movable solar system, solar system
Terms & Conditions:
Terms & Conditions:
1. MOQ: 1 sets.
2. Payment: T/T, L/C, West Union, Paypal, Alipay.
3. Price Term: FOB Guangzhou in USD.
4. Delivery Time: shipment within 5-15 days depending on order quantity.
5. Welcome ODM/OEM & sample order.
No pollution, energy saving, environmental-friendly.
Free maintenance,
Easy installation, safe operation, convenient transportation.
Long service life, long guarantee time.
Update Date:2011-10-25 20:53:05
1.N.W/G.W:7/7.8KG
2.Certificate:CE, ROHS, IEC
3.Product Size:L52.5*W7.5*H36
4.green
15W Low price solar portable charger
Specification
Main Parts
Specification
Parameters
Solar Panel
Mono/polycrystalline
15W(L52.5*W7.5*H36)
Solar Battery
Lithium
12AH
Solar Control System
Controller
10A
Inverter
150W
Control Box
Stainless Steel
Outputs
DC12V, AC86V~260V 50Hz
Charging
By solar panel or by utility power
Loads
Lap-top computers, lamps, and other small electric appliances
Features:
1. High conversion rate, high transmittance rate, high mechanical strength.
2. Good weather fastness, wind and hail resisted.
3. Lightweight, small in size, easy to clean.
4. Anti-moisture, antisepsis, anti-salt fog.
5. No pollution, energy saving, environmental-friendly.
6. Easy installation, safe operation, free maintenance.
Application:
- Remote area, mountainous area, desert area, grassland area, etc.
- Village, Country area, etc.
- Camping, travelling, outdoor activities, etc.
Battery charging for mobile, laptop, lights, camera, TV, VCD, DVD, fan or other electric power tool.
Advantages:
- Simple structure of the system.
- Suitable for living in scattered villages or driving traveling
- Easy, convenient, quick, safe, green
portable solar generator, movable solar system, solar system
Terms & Conditions:
Terms & Conditions:
1. MOQ: 1 sets.
2. Payment: T/T, L/C, West Union, Paypal, Alipay.
3. Price Term: FOB Guangzhou in USD.
4. Delivery Time: shipment within 5-15 days depending on order quantity.
5. Welcome ODM/OEM & sample order.
No pollution, energy saving, environmental-friendly.
Free maintenance,
Easy installation, safe operation, convenient transportation.
Long service life, long guarantee time.
Update Date:2011-10-25 20:53:05
Portable solar generator
1.solar panel
2.portable folding solar panel kits
3.BIPV solar panel
4.solar system
5.Portable solar generator
portable solar generator
Portable Solar Generator
Advantage:
1) Carry conveniently, suitcase can be used for camping, outdoor assembly, lacking power area.
2) Using conveniently, plug in suitcase only.
3) Multifunction, used for DC and AC both.And charge for mobile, laptop, MP3, MP4, light, TV, fan etc. small household appliances.
4) Time-saving, there is high-efficiency solar panel for charging in short time.
5) Maintenance free, don’t need to maintain frequently.
Charging:
1) It will be placed under the sunshine.
2) Open suitcase cover and let solar panel face to the sunshine.
3) Link the “connecting hole” by the connecting wire.
4) Once battery is charged full, controller will be automatically protected.
5) When the output overload or battery capacity inadequate, controller will cut to be protected
Attention:
*This product should be placed that children cannot reach, in order to avoid dangerous, and prohibit from the rain and humid.
*When using 220V/110V output, we should pay attention to insulation requirements, so as not to jeopardize the safety of people.
Model
SAP-80W
SAP-60W
SAP-40W
SAP-20W
Power of Solar Panel
80W
60W
40W
20W
Power of Inverter
800W
500W
500W
500W
Capacity of Battery
28AH
28AH
14AH
14AH
Controller
12A
12A
12A
12A
Use for AC Voltage
110V or 220V
110V or 220V
110V or 220V
110V or 220V
Use for DC Voltage
12V
12V
12V
12V
Resistive Load
800W
500W
500W
500W
DC Maximum Output
12A
12A
12A
12A
Approximate Charging Time
6-8hours
8-10hours
6-8hours
12-14hours
for battery full
Indicator Light
When the output overloads or battery capacity inadequate, the indicator light working and Alarm buzzer
Additional Accessories
5M cables ,1PC multifunctional & adjustable plug, 1PC extra lamp socket
N.W.
17
15.5
14.5
14
G.W.
19
17.5
16.5
16
Size of Suitcase
541*335*201mm
Qty in 20ft Container
650PCS
Qty in 40HQ Container
1400PCS
2.portable folding solar panel kits
3.BIPV solar panel
4.solar system
5.Portable solar generator
portable solar generator
Portable Solar Generator
Advantage:
1) Carry conveniently, suitcase can be used for camping, outdoor assembly, lacking power area.
2) Using conveniently, plug in suitcase only.
3) Multifunction, used for DC and AC both.And charge for mobile, laptop, MP3, MP4, light, TV, fan etc. small household appliances.
4) Time-saving, there is high-efficiency solar panel for charging in short time.
5) Maintenance free, don’t need to maintain frequently.
Charging:
1) It will be placed under the sunshine.
2) Open suitcase cover and let solar panel face to the sunshine.
3) Link the “connecting hole” by the connecting wire.
4) Once battery is charged full, controller will be automatically protected.
5) When the output overload or battery capacity inadequate, controller will cut to be protected
Attention:
*This product should be placed that children cannot reach, in order to avoid dangerous, and prohibit from the rain and humid.
*When using 220V/110V output, we should pay attention to insulation requirements, so as not to jeopardize the safety of people.
Model
SAP-80W
SAP-60W
SAP-40W
SAP-20W
Power of Solar Panel
80W
60W
40W
20W
Power of Inverter
800W
500W
500W
500W
Capacity of Battery
28AH
28AH
14AH
14AH
Controller
12A
12A
12A
12A
Use for AC Voltage
110V or 220V
110V or 220V
110V or 220V
110V or 220V
Use for DC Voltage
12V
12V
12V
12V
Resistive Load
800W
500W
500W
500W
DC Maximum Output
12A
12A
12A
12A
Approximate Charging Time
6-8hours
8-10hours
6-8hours
12-14hours
for battery full
Indicator Light
When the output overloads or battery capacity inadequate, the indicator light working and Alarm buzzer
Additional Accessories
5M cables ,1PC multifunctional & adjustable plug, 1PC extra lamp socket
N.W.
17
15.5
14.5
14
G.W.
19
17.5
16.5
16
Size of Suitcase
541*335*201mm
Qty in 20ft Container
650PCS
Qty in 40HQ Container
1400PCS
Portable solar generator
a. Solar panel 20W
b. Rated capacity - maintenance-free lead-acid deep cycle 34Ah
c. Rated voltage 12V
d. USB port
Components
Technical parameters
Solar Panel
Silicon
Monocrystalline silicon/Polysilicon
Power
10W*2 pcs
Dimension
650mm*420mm*18mm
Battery
Rated capacity (20 hour rate)
Maintenance-free lead-acid deep cycle17AH*2
Rated voltage
12V
Configuration
Controller
Intelligent control of solar panels on the battery charge and discharge, battery over charge and over discharge protection, and solar panels charge the battery while the battery can discharge the load.
Inverter
12V DC voltage of the battery is converted to AC110V/AC220V voltage. Provide main power to load.
Charger
Provide the function that main power charge to the battery so that this system in addition to solar panels can charge the battery, the device can also be used by the main power to charge the battery, make up the defects affected by the weather.
Light source
LED bulb YG-BB-PC32 2pcs,3m-long leads,E27 switch lampstand
b. Rated capacity - maintenance-free lead-acid deep cycle 34Ah
c. Rated voltage 12V
d. USB port
Components
Technical parameters
Solar Panel
Silicon
Monocrystalline silicon/Polysilicon
Power
10W*2 pcs
Dimension
650mm*420mm*18mm
Battery
Rated capacity (20 hour rate)
Maintenance-free lead-acid deep cycle17AH*2
Rated voltage
12V
Configuration
Controller
Intelligent control of solar panels on the battery charge and discharge, battery over charge and over discharge protection, and solar panels charge the battery while the battery can discharge the load.
Inverter
12V DC voltage of the battery is converted to AC110V/AC220V voltage. Provide main power to load.
Charger
Provide the function that main power charge to the battery so that this system in addition to solar panels can charge the battery, the device can also be used by the main power to charge the battery, make up the defects affected by the weather.
Light source
LED bulb YG-BB-PC32 2pcs,3m-long leads,E27 switch lampstand
Portable solar led lamp BE-SGX001
1.Battery:3.7V/4AH lithium
2.Power of solar electroplate:6V/5W
3. AC inchange 7~8hours,it can light for 10 hours
Material:transparentPC/ABS plastic stainless steel
Illuminant:extra bright LED*19pcs
Battery capacity:3.7V/4AH lithium
When AC inchange 7~8hours(or inchange one day by solar),it can light for about 10 hours
The power of the solar electroplate:6V/5W
Size:720mm*330*300mm
Protection class:IP44
2.Power of solar electroplate:6V/5W
3. AC inchange 7~8hours,it can light for 10 hours
Material:transparentPC/ABS plastic stainless steel
Illuminant:extra bright LED*19pcs
Battery capacity:3.7V/4AH lithium
When AC inchange 7~8hours(or inchange one day by solar),it can light for about 10 hours
The power of the solar electroplate:6V/5W
Size:720mm*330*300mm
Protection class:IP44
Portable solar led lamp BE-SGX002
1.Battery:3.7V/4AH lithium
2.Power of solar electroplate:6V/5W
3. AC inchange 7~8hours,it can light for 10 hours
Material:transparentPC/ABS plastic stainless steel
Illuminant:extra bright LED*19pcs
Battery capacity:3.7V/4AH lithium
When AC inchange 7~8hours(or inchange one day by solar),it can light for about 10 hours
The power of the solar electroplate:6V/5W
Size:235mm*195*210mm
Protection class:IP44
2.Power of solar electroplate:6V/5W
3. AC inchange 7~8hours,it can light for 10 hours
Material:transparentPC/ABS plastic stainless steel
Illuminant:extra bright LED*19pcs
Battery capacity:3.7V/4AH lithium
When AC inchange 7~8hours(or inchange one day by solar),it can light for about 10 hours
The power of the solar electroplate:6V/5W
Size:235mm*195*210mm
Protection class:IP44
Portable solar power system kits
Portable solar power system kits
Power from 10W to 300W
Ready to use
folding solar panel
Type
Module Size
Weight
Specification
Accessories
Max-Power
Max-Power Voltage
Max-Power Current
Open-Circuit Voltage
Short-circuit Current
Solar Cell
Controller,Cable(3M),Alligator Clip,
Module
mm
Kg
W
V
A
V
A
Supporting Leg,Single carry bag
SAF-300W
1306*808*70
28.0
300
30.00
10.00
36.00
10.80
Mono
All
SAF-200W
1196*534*70
16.0
200
19.00
10.53
22.80
11.37
Mono
All
SAF-180W
180
18.72
9.62
22.46
10.38
Mono
All
SAF-170W
170
18.00
9.44
21.60
10.20
Mono
All
SAF-160W
160
18.00
8.89
21.60
9.60
Mono
All
SAF-150W
150
18.00
8.33
21.60
9.00
Mono
All
SAF-120W
810*534*70
13.0
120
18.00
6.67
21.60
7.20
Mono
All
SAF-110W
110
18.00
6.11
21.60
6.60
Mono
All
SAF-100W
100
18.00
5.56
21.60
6.00
Mono
All
SAF-80W
610*534*70
9.0
80
18.00
4.44
21.60
4.80
Mono
All
SAF-60W
532*418*70
7.0
60
18.00
3.33
21.60
3.60
Mono
All
SAF-56W
56
18.00
3.11
21.60
3.36
Mono
All
SAF-50W
50
18.00
2.78
21.60
3.00
Mono
All
SAF-40W
405*423*70
5.5
40
18.00
2.22
21.60
2.40
Mono
All
SAF-36W
36
18.00
2.00
21.60
2.16
Mono
All
SAF-30W
420*281*70
4.5
30
18.00
1.67
21.60
1.80
Mono
All
SAF-24W
341*280*36
2.6
24
18.00
1.33
21.60
1.44
Mono
Without Controller&Supporting Leg
SAF-20W
20
18.00
1.11
21.60
1.20
Mono
Without Controller&Supporting Leg
SAF-16W
285*280*36
2.0
16
18.00
0.89
21.60
0.96
Mono
Without Controller&Supporting Leg
SAF-12W
204*280*36
1.6
12
18.00
0.67
21.60
0.72
Mono
Without Controller&Supporting Leg
SAF-10W
10
18.00
0.56
21.60
0.60
Mono
Without Controller&Supporting Leg
Power from 10W to 300W
Ready to use
folding solar panel
Type
Module Size
Weight
Specification
Accessories
Max-Power
Max-Power Voltage
Max-Power Current
Open-Circuit Voltage
Short-circuit Current
Solar Cell
Controller,Cable(3M),Alligator Clip,
Module
mm
Kg
W
V
A
V
A
Supporting Leg,Single carry bag
SAF-300W
1306*808*70
28.0
300
30.00
10.00
36.00
10.80
Mono
All
SAF-200W
1196*534*70
16.0
200
19.00
10.53
22.80
11.37
Mono
All
SAF-180W
180
18.72
9.62
22.46
10.38
Mono
All
SAF-170W
170
18.00
9.44
21.60
10.20
Mono
All
SAF-160W
160
18.00
8.89
21.60
9.60
Mono
All
SAF-150W
150
18.00
8.33
21.60
9.00
Mono
All
SAF-120W
810*534*70
13.0
120
18.00
6.67
21.60
7.20
Mono
All
SAF-110W
110
18.00
6.11
21.60
6.60
Mono
All
SAF-100W
100
18.00
5.56
21.60
6.00
Mono
All
SAF-80W
610*534*70
9.0
80
18.00
4.44
21.60
4.80
Mono
All
SAF-60W
532*418*70
7.0
60
18.00
3.33
21.60
3.60
Mono
All
SAF-56W
56
18.00
3.11
21.60
3.36
Mono
All
SAF-50W
50
18.00
2.78
21.60
3.00
Mono
All
SAF-40W
405*423*70
5.5
40
18.00
2.22
21.60
2.40
Mono
All
SAF-36W
36
18.00
2.00
21.60
2.16
Mono
All
SAF-30W
420*281*70
4.5
30
18.00
1.67
21.60
1.80
Mono
All
SAF-24W
341*280*36
2.6
24
18.00
1.33
21.60
1.44
Mono
Without Controller&Supporting Leg
SAF-20W
20
18.00
1.11
21.60
1.20
Mono
Without Controller&Supporting Leg
SAF-16W
285*280*36
2.0
16
18.00
0.89
21.60
0.96
Mono
Without Controller&Supporting Leg
SAF-12W
204*280*36
1.6
12
18.00
0.67
21.60
0.72
Mono
Without Controller&Supporting Leg
SAF-10W
10
18.00
0.56
21.60
0.60
Mono
Without Controller&Supporting Leg
Portable solar power system
Solar power system
1.CE approval
2.High efficiency DC/AC Inversion
3.Energy storage
System Introduction
Solar Panel Array
The module system contains one set static painted inclined roof bracket, it can fix on the flat roof or incline roof, the installation is very simple, high electricity generation efficiency, long life time.
Solar Control and Inverter
The machine combines the aptitude charge and discharge management, high efficiency DC/AC Inversion, energy storage, circuit protection and operation display, simple operation,safe and reliable.
Capability parameter
Specification/Model
DTH-100
DTH-200
DTH-300
DTH-400
Input rated voltage(VDC)
12
24
24
24
Solar panel max power(Wp)
85
350
520
700
Designed load power(W)
100
200
300
400
Inverter rated capacity(KVA)
0.2
0.5
0.8
1.0
Output rated voltage(VAC)
220
220
220
220
Rated frequency(Hz)
50
50
50
50
Paking scheme (reference)
Model
Solar panel
Bracket
Inversion Controller
Quantity for 20’feet container(sets)
Quantity for 40’feet container(sets)
DTH-100
1350*650*300mm
2000*250*250mm
700*700*1400mm
16
36
DTH-200
1350*900*200mm
1500*150*150mm
500*500*1000mm
42
88
DTH-300
1350*650*300mm
2000*250*250mm
700*700*1400mm
16
36
DTH-400
1350*650*400mm
2000*250*250mm
700*700*1400mm
15
33
DTH home system load electricity using scheme
Recommended home using load
Load power(W)
Working time
Working hours(h)
Hall light
5
17:00~18:00
1
Kitchen light
11
18:00~19:30
1.5
Living room light
15
18:30~22:30
4
Dining-room light
11
19:00~20:00
1
Toilet light
5
20:00~20:30
0.5
Bedroom light
11
20:30~23:30
3.5
21inch Color TV
100
19:00~22:00
3
Notebook computer
75
18:30~23:00
4.5
Beautiful factory
Project cases
1.CE approval
2.High efficiency DC/AC Inversion
3.Energy storage
System Introduction
Solar Panel Array
The module system contains one set static painted inclined roof bracket, it can fix on the flat roof or incline roof, the installation is very simple, high electricity generation efficiency, long life time.
Solar Control and Inverter
The machine combines the aptitude charge and discharge management, high efficiency DC/AC Inversion, energy storage, circuit protection and operation display, simple operation,safe and reliable.
Capability parameter
Specification/Model
DTH-100
DTH-200
DTH-300
DTH-400
Input rated voltage(VDC)
12
24
24
24
Solar panel max power(Wp)
85
350
520
700
Designed load power(W)
100
200
300
400
Inverter rated capacity(KVA)
0.2
0.5
0.8
1.0
Output rated voltage(VAC)
220
220
220
220
Rated frequency(Hz)
50
50
50
50
Paking scheme (reference)
Model
Solar panel
Bracket
Inversion Controller
Quantity for 20’feet container(sets)
Quantity for 40’feet container(sets)
DTH-100
1350*650*300mm
2000*250*250mm
700*700*1400mm
16
36
DTH-200
1350*900*200mm
1500*150*150mm
500*500*1000mm
42
88
DTH-300
1350*650*300mm
2000*250*250mm
700*700*1400mm
16
36
DTH-400
1350*650*400mm
2000*250*250mm
700*700*1400mm
15
33
DTH home system load electricity using scheme
Recommended home using load
Load power(W)
Working time
Working hours(h)
Hall light
5
17:00~18:00
1
Kitchen light
11
18:00~19:30
1.5
Living room light
15
18:30~22:30
4
Dining-room light
11
19:00~20:00
1
Toilet light
5
20:00~20:30
0.5
Bedroom light
11
20:30~23:30
3.5
21inch Color TV
100
19:00~22:00
3
Notebook computer
75
18:30~23:00
4.5
Beautiful factory
Project cases
Powador 2002 solar inverter
KACO is one the leading global manufacturers in this field. SOLEOS is the member of KACO group.
7 years warranty within Europe
Powador 2002 with a maximum AC power of 1,650 W. As a single unit suitable for PV installations with a generator power up to 2,000 W.
Highlights:
Degree of efficiency up to 96%
Optimized MPP tracking for higher yield
Wide range of input voltages for flexible installation planning
Integrated DC disconnector
Galvanically isolated
Optimally suited for thin-film modules
Galvanic isolated inverters: Powador 2002 – 6002
Performance: 2-6 kWp
MPP-Range: 125 – 400V
Open Circuit: 500V
Powador 6002 with Transformer
Max DC Power 6kW
Rated AC Power 5kW
DC switch Integrated Factory 7 years Guarantee
Powador 5002 with Transformer
Max DC Power 5kW Rated AC Power 4.2kW
DC switch Integrated Factory 7 years Guarantee
Powador 4202 with Transformer
Max DC Power 4.2kW Rated AC Power 3.5kW
DC switch Integrated Factory 7 years Guarantee
Powador 3002 with Transformer
Max DC Power 3kW Rated AC Power 2.5kW
DC switch Integrated Factory 7 years Guarantee
Powador 2002 with Transformer
Max DC Power 2kW Rated AC Power 1.65kW
DC switch Integrated Factory 7 years Guarantee
7 years warranty within Europe
Powador 2002 with a maximum AC power of 1,650 W. As a single unit suitable for PV installations with a generator power up to 2,000 W.
Highlights:
Degree of efficiency up to 96%
Optimized MPP tracking for higher yield
Wide range of input voltages for flexible installation planning
Integrated DC disconnector
Galvanically isolated
Optimally suited for thin-film modules
Galvanic isolated inverters: Powador 2002 – 6002
Performance: 2-6 kWp
MPP-Range: 125 – 400V
Open Circuit: 500V
Powador 6002 with Transformer
Max DC Power 6kW
Rated AC Power 5kW
DC switch Integrated Factory 7 years Guarantee
Powador 5002 with Transformer
Max DC Power 5kW Rated AC Power 4.2kW
DC switch Integrated Factory 7 years Guarantee
Powador 4202 with Transformer
Max DC Power 4.2kW Rated AC Power 3.5kW
DC switch Integrated Factory 7 years Guarantee
Powador 3002 with Transformer
Max DC Power 3kW Rated AC Power 2.5kW
DC switch Integrated Factory 7 years Guarantee
Powador 2002 with Transformer
Max DC Power 2kW Rated AC Power 1.65kW
DC switch Integrated Factory 7 years Guarantee
Powador 3200 solar inverter
Less is more: No transformer, lots of power.
Inverters without transformers offer a higher degree of efficiency
Highlights:
Integrated DC disconnector
Integrated AC/DC -sensitive residual current protection
Integrated potential-free fault signal
SO interface for control of large displays
Highest degree of efficiency due to purely transformerless technology
Pure convection cooling
Easy installation due to mounting plate and housing doors
MPP controller
Inverters without transformers offer a higher degree of efficiency
Highlights:
Integrated DC disconnector
Integrated AC/DC -sensitive residual current protection
Integrated potential-free fault signal
SO interface for control of large displays
Highest degree of efficiency due to purely transformerless technology
Pure convection cooling
Easy installation due to mounting plate and housing doors
MPP controller
Powador XP350-HV TL inverter
Max DC Power 385kW
Rated AC Power 350kW
DC switch Integrated
Factory 3 years Guarantee
§Rated output: 350kW
§MPP range: 450..830 V
§No-load voltage 1000 V
§Ausgangsspannung: 3 x 290 V AC
§Transformerless §Max. efficiency: 98,2%
§European efficiency: 97,8% §Ambient temperature: -20°C … +50°C
§Dimensions ca. 2110x2400x850mm
§Weight: 1370kg
Rated AC Power 350kW
DC switch Integrated
Factory 3 years Guarantee
§Rated output: 350kW
§MPP range: 450..830 V
§No-load voltage 1000 V
§Ausgangsspannung: 3 x 290 V AC
§Transformerless §Max. efficiency: 98,2%
§European efficiency: 97,8% §Ambient temperature: -20°C … +50°C
§Dimensions ca. 2110x2400x850mm
§Weight: 1370kg
Power Ground Solar Kit
PV mounting structure
1 Not embedded the ground directly
2 Low cost
3 Comply with AS/NZS1170
4 OEM/ODM welcomed
The ground PV mounting structure is convenient for installation and maintenance and very suitable for open ground outdoor for its high stability. It is suitable for installation and application of solar panels whether it is framed or not.
Key features:
Quick installation, saving schedule
with the professional design, Stanwic PV system
composed by a small number of assembly (assembly of parts in advance), no on-site drilling or welding, can be quickly assembled on site, unique pieces of aluminum card guide and installation design, improve the installation efficiency, saving schedule.
Professional design, lower costs
Product were design by experienced designers, to meet the AS / NZS 1170 , with mature process maturity, stable structure, systematic design to save cost for the customers.
Load design,
Safety
Guarantee
Stanwic fixed triangle PV bracket system design, have high load capacity, applications take full account of dynamic load and static load characteristics. Such as: component weight, combine factors of wind, snow and earthquake load, to ensure the long-term performance of the product.
Preservative
Treatment,
increase service life
Stanwic fixed triangle PV bracket system provides
aluminum
oxide and stainless steel components, which is easy for maintenance; the product can meet the general outdoor service life of 25 years PV module requirements.
High reliability, 10-year
quality
Assurance
Design life for 25 years, 10
quality
assurance, to provide customers with highly reliable quality assurance.
1 Not embedded the ground directly
2 Low cost
3 Comply with AS/NZS1170
4 OEM/ODM welcomed
The ground PV mounting structure is convenient for installation and maintenance and very suitable for open ground outdoor for its high stability. It is suitable for installation and application of solar panels whether it is framed or not.
Key features:
Quick installation, saving schedule
with the professional design, Stanwic PV system
composed by a small number of assembly (assembly of parts in advance), no on-site drilling or welding, can be quickly assembled on site, unique pieces of aluminum card guide and installation design, improve the installation efficiency, saving schedule.
Professional design, lower costs
Product were design by experienced designers, to meet the AS / NZS 1170 , with mature process maturity, stable structure, systematic design to save cost for the customers.
Load design,
Safety
Guarantee
Stanwic fixed triangle PV bracket system design, have high load capacity, applications take full account of dynamic load and static load characteristics. Such as: component weight, combine factors of wind, snow and earthquake load, to ensure the long-term performance of the product.
Preservative
Treatment,
increase service life
Stanwic fixed triangle PV bracket system provides
aluminum
oxide and stainless steel components, which is easy for maintenance; the product can meet the general outdoor service life of 25 years PV module requirements.
High reliability, 10-year
quality
Assurance
Design life for 25 years, 10
quality
assurance, to provide customers with highly reliable quality assurance.
15W Monocrystalline Silicon Solar Cell Panel
15W Solar Panel
1.ISO, CE, TUV, CCC
2.High efficiency
3.80% output warranty within 25 years
4.Customized sizes
15W Monocrystalline Silicon Solar Panel with high quality and low price.
Our Advantages:
1) 10 years experience of solar module encapsulation.
2) 31MW solar module have been used in Chinese major grid-connected projects.
3) Be among the first Chinese enterprises to enter the Germany grid-connected market.
4) To build up a 1GW module encapsulation & integration capacity in 2015.
5) Own 45 patents and 3 module production bases in different cities.
Type
Parameters
DBF15
Electricity
Performance
Wp
Peak Power Output (W)
15
Vmp
Maximum Power Voltage (V)
17.5
Imp
Maximum Power Current (A)
0.86
Isc
Short Circuit Current(A)
0.95
Voc
Open Circuit Voltage(V)
21.5
Maximum System Voltage
1000V
DC
Mechanical
Performance
Wind Bearing
2.4KN/
Number&Type of Cells
36 & 72 PCS Mono cells 156 mm
Working Temperature
-40~90°C
Solar panel
Temperature
Coefficient
Power T
K
(P
N
)
-0.38%/°C
Open Circuit Voltage T
K
(U
OC
)
-0.35%/°C
Short Circuit Current T
K
(I
SC
)
+0.06%/°C
We are professional manufacturer with ISO9001:2000 certificate for kinds of solar panels in China. Our main products include Crystalline Silicon solar panels, Amorphous Thin Film Silicon Solar panels, and BIPV products. Since 2001, we have been being in the sector of solar panels for 10 years. Our products are mature and quality is reliable.
Welcome to visit our factory!
1) 10 years experience of solar module encapsulation.
2) 31MW solar module have been used in Chinese major grid-connected projects.
3) Be among the first Chinese enterprises to enter the Germany grid-connected market.
4) To build up a 1GW module encapsulation & integration capacity in 2015.
5) Own 45 patents and 3 module production bases in different cities.
1.ISO, CE, TUV, CCC
2.High efficiency
3.80% output warranty within 25 years
4.Customized sizes
15W Monocrystalline Silicon Solar Panel with high quality and low price.
Our Advantages:
1) 10 years experience of solar module encapsulation.
2) 31MW solar module have been used in Chinese major grid-connected projects.
3) Be among the first Chinese enterprises to enter the Germany grid-connected market.
4) To build up a 1GW module encapsulation & integration capacity in 2015.
5) Own 45 patents and 3 module production bases in different cities.
Type
Parameters
DBF15
Electricity
Performance
Wp
Peak Power Output (W)
15
Vmp
Maximum Power Voltage (V)
17.5
Imp
Maximum Power Current (A)
0.86
Isc
Short Circuit Current(A)
0.95
Voc
Open Circuit Voltage(V)
21.5
Maximum System Voltage
1000V
DC
Mechanical
Performance
Wind Bearing
2.4KN/
Number&Type of Cells
36 & 72 PCS Mono cells 156 mm
Working Temperature
-40~90°C
Solar panel
Temperature
Coefficient
Power T
K
(P
N
)
-0.38%/°C
Open Circuit Voltage T
K
(U
OC
)
-0.35%/°C
Short Circuit Current T
K
(I
SC
)
+0.06%/°C
We are professional manufacturer with ISO9001:2000 certificate for kinds of solar panels in China. Our main products include Crystalline Silicon solar panels, Amorphous Thin Film Silicon Solar panels, and BIPV products. Since 2001, we have been being in the sector of solar panels for 10 years. Our products are mature and quality is reliable.
Welcome to visit our factory!
1) 10 years experience of solar module encapsulation.
2) 31MW solar module have been used in Chinese major grid-connected projects.
3) Be among the first Chinese enterprises to enter the Germany grid-connected market.
4) To build up a 1GW module encapsulation & integration capacity in 2015.
5) Own 45 patents and 3 module production bases in different cities.
Power Inverter with Charger
Pure Sine Wave Form AC OutPut;
High transfer time: below 4ms;
Micro CPU processor control;
Work with AC Equipment widely;
VMI-D Series Inverter With Charger
Key Spec
Micro CPU processor control;
Pure Sine Wave Form AC OutPut;
Work with AC Equipment widely,such as Aircondition,refrigeratory,Pump,TV,Light,Fan and so on;
High Charge Current up to 50A,it is adjustable;
Intelligent LED display,contain display of the Utility,Battery,Output,Fault,Saving Mode;
Power Capacity,Low Votlage,Charging Current,Battery;
Low Self consumetion,less 1.2A,real advance technology;
Saving 12% Power at least on the basic of Saving Mode;
Bypass Charge and Power Supply Function;
Automatically and swiftly line to battery switch over;
High Transfer time,below 4ms;
Full Rang of Intelligent Protection,over load,over current,over voltage,over heat,short circuit,low voltage and so on;
Votlage and Frequency Out Put are adjustable;
Votagle and Frequency is Optional:220V/110V+-10%,50/60Hz;
Specification:
Series
VMI-D
Model
VMI-D500
VMI-D1000
VMI-D2000
VMI-D3000
VMI-D4000
VMI-D5000
Inverter Capacity
500VA
1000VA
2000VA
3000VA
4000VA
5000VA
DC Input
Voltage
12V
24V
48V
48V
48V
48V
Current
40A
40A
50A
75A
100A
125A
DC range
10-15V
20-30V
40-60V
AC Bypass
Input Voltage
160V-280V/95V-135V
Input Frequency
45-55/55-65
Bypass Current
2.3A/5A
4.5A-9A
9.1A-18A
13.6A-27A
18.2A-36A
22.7A-45A
Transfer Time
<=4ms
AC Output
Voltage
220V+-3%AC/110V+-3%AC
Frequency
50HZ+-0.5%/60HZ+-0.5%
Power factor
0.7
Capacity
350W
700W
1400W
2100W
2800W
3500W
Generator working
WORK WITH GENERATOR
THD
<=3%
Effiency
85%
Waveform
pure sine wave form
Protection
Over temperature
YES
Over Voltage
YES
Under Voltage
YES
Over load
YES
Short circuit
YES
Function
Panel
LED DISPLAY
Energy saving
YES
Voltage
110V/220V/230V/ Optional CPU Control
Frequency
50HZ/60HZ Optional CPU Control
Battery Manager
Automatic Manager of Battery Charging, extend the battery life
charging
YES
Beeping
Inverter mode,beeping sound or slience optioal
Enviroment
Temperature
20oC ~ 45oC
Humidity
0%-95%
Noise
<=40db(1M)
Physical
Net weight
9.5
15
19.5
26.5
30.5
36
Gross Weight
12
18
23
30
34
39
Dimension
510*200*350
Packing Dimension
560*240*380
High transfer time: below 4ms;
Micro CPU processor control;
Work with AC Equipment widely;
VMI-D Series Inverter With Charger
Key Spec
Micro CPU processor control;
Pure Sine Wave Form AC OutPut;
Work with AC Equipment widely,such as Aircondition,refrigeratory,Pump,TV,Light,Fan and so on;
High Charge Current up to 50A,it is adjustable;
Intelligent LED display,contain display of the Utility,Battery,Output,Fault,Saving Mode;
Power Capacity,Low Votlage,Charging Current,Battery;
Low Self consumetion,less 1.2A,real advance technology;
Saving 12% Power at least on the basic of Saving Mode;
Bypass Charge and Power Supply Function;
Automatically and swiftly line to battery switch over;
High Transfer time,below 4ms;
Full Rang of Intelligent Protection,over load,over current,over voltage,over heat,short circuit,low voltage and so on;
Votlage and Frequency Out Put are adjustable;
Votagle and Frequency is Optional:220V/110V+-10%,50/60Hz;
Specification:
Series
VMI-D
Model
VMI-D500
VMI-D1000
VMI-D2000
VMI-D3000
VMI-D4000
VMI-D5000
Inverter Capacity
500VA
1000VA
2000VA
3000VA
4000VA
5000VA
DC Input
Voltage
12V
24V
48V
48V
48V
48V
Current
40A
40A
50A
75A
100A
125A
DC range
10-15V
20-30V
40-60V
AC Bypass
Input Voltage
160V-280V/95V-135V
Input Frequency
45-55/55-65
Bypass Current
2.3A/5A
4.5A-9A
9.1A-18A
13.6A-27A
18.2A-36A
22.7A-45A
Transfer Time
<=4ms
AC Output
Voltage
220V+-3%AC/110V+-3%AC
Frequency
50HZ+-0.5%/60HZ+-0.5%
Power factor
0.7
Capacity
350W
700W
1400W
2100W
2800W
3500W
Generator working
WORK WITH GENERATOR
THD
<=3%
Effiency
85%
Waveform
pure sine wave form
Protection
Over temperature
YES
Over Voltage
YES
Under Voltage
YES
Over load
YES
Short circuit
YES
Function
Panel
LED DISPLAY
Energy saving
YES
Voltage
110V/220V/230V/ Optional CPU Control
Frequency
50HZ/60HZ Optional CPU Control
Battery Manager
Automatic Manager of Battery Charging, extend the battery life
charging
YES
Beeping
Inverter mode,beeping sound or slience optioal
Enviroment
Temperature
20oC ~ 45oC
Humidity
0%-95%
Noise
<=40db(1M)
Physical
Net weight
9.5
15
19.5
26.5
30.5
36
Gross Weight
12
18
23
30
34
39
Dimension
510*200*350
Packing Dimension
560*240*380
Power Plant Invertor -without Transfer
Meeting the German requirement of active power derating function (100%,60%,30%,0%)
pls contact Caddie Pan for detail quotation!
Performance features
Meeting the German requirement of active power derating function (100%,60%,30%,0%)
Reactive power is adjustable. with the power factor ranging from leading 0.9 to lagging 0.9.
Without transformer, maximum conversion efficiency is up to 98.7%.
Wide range of DC voltage input, up to 1000V. Increasing the service life of system to 30 years by using membrane capacitance.
Function of low voltage ride through (LVRT).
Adapt to sever low-temperature environment(reaching -30°C)
Multilingual touch screen monitoring interfac
Auxiliary electrical heating(optional)
Applicable to high altitude, <6000 m (derating is needed for the altitude above 3000 m)
German Rittal cabinet
certificationcertificationEU CE certification and Golden Sun certification
Technical Specifications
MODEL DYG-630KTL
DC SIDE DATA
Max. DC Voltage 1100Vdc
Start Voltage 520V
MPP Voltage Range 500~850Vdc
Min. DC Voltage 500V
Max. DC Power 700kWp
Max. Input Current 1400A
AC SIDE DATA
Rated Output Power 630kW
Max. AC Output Current 1270A
Rated Grid Voltage 315Vac
Grid Voltage Range 250~362Vac
Rated Grid Frequency 50Hz/60Hz
Grid Frequency Range 47~51.5Hz/57~61.5Hz
Output Current THD <3% (at nominal power)
DC Current Injection <0.5% of rated inverter output current
Power Factor 0.9(lagging)~0.9(leading)
SYSTEM
Max. Efficiency 98.7%
Euro Efficiency 98.5%
Protection Degree IP20 (indoor)
Operating Temp. -30~+55°C
Cooling Method controlled forced-air cooling
Relative Humidity 0~95%, non-condensing
Max. Working Altitude 6000m (operation with derating above 3000m)
Display AND COMMUNICATIONS
Display touch screen LCD
Standard Comm. Interfaces RS485
Optional Comm. Interfaces Ethernet/GPRS
MECHANICAL DATA
Dimensions(WxHxD) 2800x2180x850mm
Net Weight 2400kg
pls contact Caddie Pan for detail quotation!
Performance features
Meeting the German requirement of active power derating function (100%,60%,30%,0%)
Reactive power is adjustable. with the power factor ranging from leading 0.9 to lagging 0.9.
Without transformer, maximum conversion efficiency is up to 98.7%.
Wide range of DC voltage input, up to 1000V. Increasing the service life of system to 30 years by using membrane capacitance.
Function of low voltage ride through (LVRT).
Adapt to sever low-temperature environment(reaching -30°C)
Multilingual touch screen monitoring interfac
Auxiliary electrical heating(optional)
Applicable to high altitude, <6000 m (derating is needed for the altitude above 3000 m)
German Rittal cabinet
certificationcertificationEU CE certification and Golden Sun certification
Technical Specifications
MODEL DYG-630KTL
DC SIDE DATA
Max. DC Voltage 1100Vdc
Start Voltage 520V
MPP Voltage Range 500~850Vdc
Min. DC Voltage 500V
Max. DC Power 700kWp
Max. Input Current 1400A
AC SIDE DATA
Rated Output Power 630kW
Max. AC Output Current 1270A
Rated Grid Voltage 315Vac
Grid Voltage Range 250~362Vac
Rated Grid Frequency 50Hz/60Hz
Grid Frequency Range 47~51.5Hz/57~61.5Hz
Output Current THD <3% (at nominal power)
DC Current Injection <0.5% of rated inverter output current
Power Factor 0.9(lagging)~0.9(leading)
SYSTEM
Max. Efficiency 98.7%
Euro Efficiency 98.5%
Protection Degree IP20 (indoor)
Operating Temp. -30~+55°C
Cooling Method controlled forced-air cooling
Relative Humidity 0~95%, non-condensing
Max. Working Altitude 6000m (operation with derating above 3000m)
Display AND COMMUNICATIONS
Display touch screen LCD
Standard Comm. Interfaces RS485
Optional Comm. Interfaces Ethernet/GPRS
MECHANICAL DATA
Dimensions(WxHxD) 2800x2180x850mm
Net Weight 2400kg
Power controller WS-C2415 12/24V 6/10/15A
Power controller
CE RoHS PWM SOC overcharge overload undervoltage short circuit protection Voltage power controller
RoHS CE WS-C2415 12/24V 6/10/15A Power controllerThe WELLSEE Solar Charge Controller (WELLSEE PV controller,battery controller,solar regulator) applies in solar energy photovoltaic systems, which coordinates the working of solar panels, batteries and loads. It adds some protection functions, so that the entire system can be in efficient and safe operation.
WS-C2415 15A series charge controllers apply to all types of photoelectric panels and various types of batteries, MCU (Micro-Processing Controller) has PMW (Pulse Modulation Wide-frequency) 0~100% variable duty cycle process. According to the types and actual charging situation of the battery, “WS-C “controller series can provide the fast and best charging voltage and electricity from the PV panel. C30 and C60 series are equipped with advanced man-machine interactive function, so the user can adjust the charging voltage.
Functions
1. Applying with various types of batteries It is mainly suitable for Pb acid and gel batteries.
2. Automatic recognition of input voltage
3. It can distinguish DC12 or DC24V automatically
4. Micro processing controller Pulse Modulation Wide-frequency(PWM)charge.
5. Temperature sensors for charging the battery in compensation
6. Overload protection (automatic comeback)
7. Overcharge protection
8.. Short circuit protection (automatic comeback)
10. Thunder protection
11. Reverse discharge protection
12. Converse polarity connection protection (automatic comeback)
13. undervoltage protection
protection
Notice
Be sure to connect correctly the positive and negative poles of the battery firstly ,the load, and lastly solar panel .Don’t reverse.
Please check the rated voltage of solar panels. batteries, and load before connecting, Make sure their rated voltage should be all 12V(or24V ,or 48V)
Pay more attention to “+” and “-“ poles of solar panels, batteries, controller and loads during the process of connection.
The rated current of solar panels and loads must be lower than the controller .
TECHNICAL INDEX
Model
WS-C2415 6A
WS-C2415 10A
WS-C2415 15A
Rated Voltage
12V / 24V Automatic voltage recognition
Max Load current
6A
10A
15A
Input voltage range
12V
~
17V / 24V
~
34V
Length≤1m
Charge loop drop
Less than 0.25V
Length≤1m
Discharge loop drop
Less than
0.05V
Over voltage protection
17V / 34V
Full charge cut
13.7V / 27.4V
Low voltage cut
10.5V~11V / 21V~22V
Temperature compensation
-3mv/
°C
/cell
No load loss
≤10mA
Max wire area
2.5mm
2
Ambient temperature
-25
°C
——+55
°C
We are special large scale R&D and manufactory enterprise of solar charge and discharge controller and global supplier of Wellsee solar controller and photovoltaic system equipment. We also have passed ISO9001, CE and RoHS certifications. Wuhan Wellsee products can be designed and produced according to clients’ special request. Welcome agents from every area.
Product photos
CE RoHS PWM SOC overcharge overload undervoltage short circuit protection Voltage power controller
RoHS CE WS-C2415 12/24V 6/10/15A Power controllerThe WELLSEE Solar Charge Controller (WELLSEE PV controller,battery controller,solar regulator) applies in solar energy photovoltaic systems, which coordinates the working of solar panels, batteries and loads. It adds some protection functions, so that the entire system can be in efficient and safe operation.
WS-C2415 15A series charge controllers apply to all types of photoelectric panels and various types of batteries, MCU (Micro-Processing Controller) has PMW (Pulse Modulation Wide-frequency) 0~100% variable duty cycle process. According to the types and actual charging situation of the battery, “WS-C “controller series can provide the fast and best charging voltage and electricity from the PV panel. C30 and C60 series are equipped with advanced man-machine interactive function, so the user can adjust the charging voltage.
Functions
1. Applying with various types of batteries It is mainly suitable for Pb acid and gel batteries.
2. Automatic recognition of input voltage
3. It can distinguish DC12 or DC24V automatically
4. Micro processing controller Pulse Modulation Wide-frequency(PWM)charge.
5. Temperature sensors for charging the battery in compensation
6. Overload protection (automatic comeback)
7. Overcharge protection
8.. Short circuit protection (automatic comeback)
10. Thunder protection
11. Reverse discharge protection
12. Converse polarity connection protection (automatic comeback)
13. undervoltage protection
protection
Notice
Be sure to connect correctly the positive and negative poles of the battery firstly ,the load, and lastly solar panel .Don’t reverse.
Please check the rated voltage of solar panels. batteries, and load before connecting, Make sure their rated voltage should be all 12V(or24V ,or 48V)
Pay more attention to “+” and “-“ poles of solar panels, batteries, controller and loads during the process of connection.
The rated current of solar panels and loads must be lower than the controller .
TECHNICAL INDEX
Model
WS-C2415 6A
WS-C2415 10A
WS-C2415 15A
Rated Voltage
12V / 24V Automatic voltage recognition
Max Load current
6A
10A
15A
Input voltage range
12V
~
17V / 24V
~
34V
Length≤1m
Charge loop drop
Less than 0.25V
Length≤1m
Discharge loop drop
Less than
0.05V
Over voltage protection
17V / 34V
Full charge cut
13.7V / 27.4V
Low voltage cut
10.5V~11V / 21V~22V
Temperature compensation
-3mv/
°C
/cell
No load loss
≤10mA
Max wire area
2.5mm
2
Ambient temperature
-25
°C
——+55
°C
We are special large scale R&D and manufactory enterprise of solar charge and discharge controller and global supplier of Wellsee solar controller and photovoltaic system equipment. We also have passed ISO9001, CE and RoHS certifications. Wuhan Wellsee products can be designed and produced according to clients’ special request. Welcome agents from every area.
Product photos
Practical Split Pressurized Water Heater Solar
Split Pressurized Water Heater Solar
1.OEM is available
2.Quality assurance
3.Health Economy Elegant
4.CE,ISO9001:2008,CCC
split pressurized water heater solar:
Features:
1. This system consists of solar vacuum tube, water tank, stand.
2. Using solar vacuum tube is very high efficiency.
3. The complete system doesn't need any power, green and economic.
4. Easy install, easy operation, fashionable.
Specification:
*
inner tank material: food grade sus304-2B stainless steel
*
material of outer tank : PVDF/color steel
*
frame material : aluminum alloy/galvanized steel
*
heat insulation layer : polyurethane foam, 55 mm thinkness
*
hear exchanger: red copper
*
pattern of the water tank : inflow side
*
heat preservation: 72-80 hours
*
hail resistance: 25mm
Vacuum tubes
Product components
1.OEM is available
2.Quality assurance
3.Health Economy Elegant
4.CE,ISO9001:2008,CCC
split pressurized water heater solar:
Features:
1. This system consists of solar vacuum tube, water tank, stand.
2. Using solar vacuum tube is very high efficiency.
3. The complete system doesn't need any power, green and economic.
4. Easy install, easy operation, fashionable.
Specification:
*
inner tank material: food grade sus304-2B stainless steel
*
material of outer tank : PVDF/color steel
*
frame material : aluminum alloy/galvanized steel
*
heat insulation layer : polyurethane foam, 55 mm thinkness
*
hear exchanger: red copper
*
pattern of the water tank : inflow side
*
heat preservation: 72-80 hours
*
hail resistance: 25mm
Vacuum tubes
Product components
Pre-heated pressure solar water heater
1.Beatifull design
2.Competitive price and high quality
3.Certification:CE,ISO9001,SABS
4.5 years warranty for whole system
HK Pre-heated pressure Solar Water Heater
Solar water heater warranty:
1.5 years manufacturer's warranty against deffects in material and workmanship.
2.15 years for vacuum tube
Descripition
Pre-heated pressure solar water heater
Material of inner tank
0.4-0.6mm SUS304 Stainless Steel
Material of outer tank
0.4mmSUS304 /SUS202 Stainless Steel
Tank insulating layer
55mmhigh-density polyurethane foamed
Inlet and outlet hole
male G 1/2, 3/4
Solar collector tube
Three target vacuum tube
Thickness of glass tube
1.6mm
Vacuum tube tightness
P≤0.005 Pa
Absorption
as=0.93-0.96(AM1.5)
Emission ratio
εh=0.04-0.06(80C±5C)
Idle sunning property parameters
Y=220~260m2.C/KW
Average heat loss coefficient
ULT=0.6~0.7W/(m2.C)
Bracket:
Galvanized Steel or Aluminum alloy
Structure of tank:
4 holes for air vent,overflow,water inlet and outlet,
electric heater
welding:
argon arc welding
Fastening pieces:
stainless steel screw
-------------------------------WHY CHOOSE HK------------------------------------------------
Primary competitive advantages:
1) CE, ISO9001: 2000,SRCC,Solar Key Mark,SABS,CSA.
2) good price and quality
3) Prompt delivery
4) Environmental Protection
5) OEM order is accepted
6) experience of export to 49 countries
7) International quality warranty: 3 years for whole system and 15 years for vacuum tube.
Contact information:
Mobile:15824390771
2.Competitive price and high quality
3.Certification:CE,ISO9001,SABS
4.5 years warranty for whole system
HK Pre-heated pressure Solar Water Heater
Solar water heater warranty:
1.5 years manufacturer's warranty against deffects in material and workmanship.
2.15 years for vacuum tube
Descripition
Pre-heated pressure solar water heater
Material of inner tank
0.4-0.6mm SUS304 Stainless Steel
Material of outer tank
0.4mmSUS304 /SUS202 Stainless Steel
Tank insulating layer
55mmhigh-density polyurethane foamed
Inlet and outlet hole
male G 1/2, 3/4
Solar collector tube
Three target vacuum tube
Thickness of glass tube
1.6mm
Vacuum tube tightness
P≤0.005 Pa
Absorption
as=0.93-0.96(AM1.5)
Emission ratio
εh=0.04-0.06(80C±5C)
Idle sunning property parameters
Y=220~260m2.C/KW
Average heat loss coefficient
ULT=0.6~0.7W/(m2.C)
Bracket:
Galvanized Steel or Aluminum alloy
Structure of tank:
4 holes for air vent,overflow,water inlet and outlet,
electric heater
welding:
argon arc welding
Fastening pieces:
stainless steel screw
-------------------------------WHY CHOOSE HK------------------------------------------------
Primary competitive advantages:
1) CE, ISO9001: 2000,SRCC,Solar Key Mark,SABS,CSA.
2) good price and quality
3) Prompt delivery
4) Environmental Protection
5) OEM order is accepted
6) experience of export to 49 countries
7) International quality warranty: 3 years for whole system and 15 years for vacuum tube.
Contact information:
Mobile:15824390771
Pre-heated pressure solar water heater
1 Use in any time
2 More capacity
3 Strong hydraulic pressure
4 Easy operation
5 Economical and Environmental protecting
HK Pre-heated pressure Solar Water Heater
Solar water heater warranty:
1.5 years manufacturer's warranty against deffects in material and workmanship.
2.15 years for vacuum tube
Descripition
Pre-heated pressure solar water heater
Material of inner tank
0.4-0.6mm SUS304 Stainless Steel
Material of outer tank
0.4mmSUS304 /SUS202 Stainless Steel
Tank insulating layer
55mmhigh-density polyurethane foamed
Inlet and outlet hole
male G 1/2, 3/4
Solar collector tube
Three target vacuum tube
Thickness of glass tube
1.6mm
Vacuum tube tightness
P≤0.005 Pa
Absorption
as=0.93-0.96(AM1.5)
Emission ratio
εh=0.04-0.06(80C±5C)
Idle sunning property parameters
Y=220~260m2.C/KW
Average heat loss coefficient
ULT=0.6~0.7W/(m2.C)
Bracket:
Galvanized Steel or Aluminum alloy
Structure of tank:
4 holes for air vent,overflow,water inlet and outlet,
electric heater
welding:
argon arc welding
Fastening pieces:
stainless steel screw
-------------------------------WHY CHOOSE HK------------------------------------------------
Primary competitive advantages:
1) CE, ISO9001: 2000,SRCC,Solar Key Mark,SABS,CSA.
2) good price and quality
3) Prompt delivery
4) Environmental Protection
5) OEM order is accepted
6) experience of export to 49 countries
7) International quality warranty: 3 years for whole system and 15 years for vacuum tube.
Contact information:
Mobile:15824390771
2 More capacity
3 Strong hydraulic pressure
4 Easy operation
5 Economical and Environmental protecting
HK Pre-heated pressure Solar Water Heater
Solar water heater warranty:
1.5 years manufacturer's warranty against deffects in material and workmanship.
2.15 years for vacuum tube
Descripition
Pre-heated pressure solar water heater
Material of inner tank
0.4-0.6mm SUS304 Stainless Steel
Material of outer tank
0.4mmSUS304 /SUS202 Stainless Steel
Tank insulating layer
55mmhigh-density polyurethane foamed
Inlet and outlet hole
male G 1/2, 3/4
Solar collector tube
Three target vacuum tube
Thickness of glass tube
1.6mm
Vacuum tube tightness
P≤0.005 Pa
Absorption
as=0.93-0.96(AM1.5)
Emission ratio
εh=0.04-0.06(80C±5C)
Idle sunning property parameters
Y=220~260m2.C/KW
Average heat loss coefficient
ULT=0.6~0.7W/(m2.C)
Bracket:
Galvanized Steel or Aluminum alloy
Structure of tank:
4 holes for air vent,overflow,water inlet and outlet,
electric heater
welding:
argon arc welding
Fastening pieces:
stainless steel screw
-------------------------------WHY CHOOSE HK------------------------------------------------
Primary competitive advantages:
1) CE, ISO9001: 2000,SRCC,Solar Key Mark,SABS,CSA.
2) good price and quality
3) Prompt delivery
4) Environmental Protection
5) OEM order is accepted
6) experience of export to 49 countries
7) International quality warranty: 3 years for whole system and 15 years for vacuum tube.
Contact information:
Mobile:15824390771
Pre-heated solar water heater
copper coil solar water heater ,supply constant and steady hot water
Solar& Electric :
Non-pressurized vaccum tube solar water heater works with pressure up to 0.2 Mpa and can normally work in all climate.The absorptive coating is ALN/ALN-SS/CU.This coating has high absorbing ratio(0.94) and low emission ratio(0.6).The heat efficiency is 0.64.The life span of the vaccum tube is 15 years.There is one copper coil inside the water tank.
Characteristics:
1.It is not easy to be frozen and cracked down even in hash weather.
2.The shortcoming of bursting of tube or water leakage due to aged rubber ring is eradicated;
3.The water tank is welded scientifically under the high frequency weld and argon-arc weld.The non-pressurized vaccum tube can be directly connected with tap water system to operate automatically with pressure-bearing.
4.Water proof grade:IP *4
5.Hot water can be used directly, or can be used as a pre-heat.
6.Electric heater can be used 1500W or 3000W
Specification:
1.The inner tank is made of SUS304-2B stainless steel (thickness:0.4mm(normal)/0.31mm/0.5mm/0.6mm).There is copper coil(optional) in the tank, and the heat water just come from the copper not from the tank;
2.The outer tank is made of a grade color steel.(thickness:0.4mm)
3.Heat insulation layer:Imported PU(thickness:55-60mm).
4.The normal size of vaccum tube is 58mm*1800 and 47mm*1500mm.
5..The bracket is made of galvanized steel with power painting (thickness:1.2mm).
6..Bracket degree:45 /38 degree(normal).The actual value can be adjusted according to your latitude.
7..Rated Voltage of electric heater:220V or 110V
Solar& Electric :
Non-pressurized vaccum tube solar water heater works with pressure up to 0.2 Mpa and can normally work in all climate.The absorptive coating is ALN/ALN-SS/CU.This coating has high absorbing ratio(0.94) and low emission ratio(0.6).The heat efficiency is 0.64.The life span of the vaccum tube is 15 years.There is one copper coil inside the water tank.
Characteristics:
1.It is not easy to be frozen and cracked down even in hash weather.
2.The shortcoming of bursting of tube or water leakage due to aged rubber ring is eradicated;
3.The water tank is welded scientifically under the high frequency weld and argon-arc weld.The non-pressurized vaccum tube can be directly connected with tap water system to operate automatically with pressure-bearing.
4.Water proof grade:IP *4
5.Hot water can be used directly, or can be used as a pre-heat.
6.Electric heater can be used 1500W or 3000W
Specification:
1.The inner tank is made of SUS304-2B stainless steel (thickness:0.4mm(normal)/0.31mm/0.5mm/0.6mm).There is copper coil(optional) in the tank, and the heat water just come from the copper not from the tank;
2.The outer tank is made of a grade color steel.(thickness:0.4mm)
3.Heat insulation layer:Imported PU(thickness:55-60mm).
4.The normal size of vaccum tube is 58mm*1800 and 47mm*1500mm.
5..The bracket is made of galvanized steel with power painting (thickness:1.2mm).
6..Bracket degree:45 /38 degree(normal).The actual value can be adjusted according to your latitude.
7..Rated Voltage of electric heater:220V or 110V
Pre-insulated double solar hose
Pre-insulated Double Solar Hose
---Easy for installation
--Excellent UV and Weathering resistance
Pre-insulated Double Solar Hose
Features:
---Easy for installation
---Excellent UV and Weathering resistance
---Extremely suitable for solar thermal installation
Pre-insulated twin-tube system
, consisting of: AEROFLEX insulation of EPDM, 2 x corrugated stainless steel tubes (feed and return), black protection film, UV-resistant, Silicone-sensor line 2 x 0,0.75² VDE
Corrugated stainless steel tube:
--
Material :SUS304/316L
-- High Flexibility
--Recommended pressure at 200 °C DN 16/11 bar; DN 20/11 bar.
Insulation AEROFLEX-tube
of EPDM,
---Light, flexible, closed cell, synthetic caoutchouc;
---Free of PVC, CFC. Material class: B2 according to DIN 4102.
---No embrittlement of copper and stainless steel pipes according to DIN 1988 part 7;
---Dimensions according to DIN 52 275-2.
---Long term temperature stability up to +150°C; short term up to +175°C (stagnation temperature of the collectors).
---The characteristic value of thermal conductivity at +40 °C, λ
40°C
= 0,037 W/mK, at 0 °C, λ
0°C
= 0,033 W/mK. Very good ozone resistance, UV-resistant.
---Wall thickness: 13mm/20mm
Lengths and Size Available:
---Sizes: DN12 (R1/2”),DN16(R3/4”),DN20(R1”)
---Lengths: 10m,15m,20m,25m,30m
---Easy for installation
--Excellent UV and Weathering resistance
Pre-insulated Double Solar Hose
Features:
---Easy for installation
---Excellent UV and Weathering resistance
---Extremely suitable for solar thermal installation
Pre-insulated twin-tube system
, consisting of: AEROFLEX insulation of EPDM, 2 x corrugated stainless steel tubes (feed and return), black protection film, UV-resistant, Silicone-sensor line 2 x 0,0.75² VDE
Corrugated stainless steel tube:
--
Material :SUS304/316L
-- High Flexibility
--Recommended pressure at 200 °C DN 16/11 bar; DN 20/11 bar.
Insulation AEROFLEX-tube
of EPDM,
---Light, flexible, closed cell, synthetic caoutchouc;
---Free of PVC, CFC. Material class: B2 according to DIN 4102.
---No embrittlement of copper and stainless steel pipes according to DIN 1988 part 7;
---Dimensions according to DIN 52 275-2.
---Long term temperature stability up to +150°C; short term up to +175°C (stagnation temperature of the collectors).
---The characteristic value of thermal conductivity at +40 °C, λ
40°C
= 0,037 W/mK, at 0 °C, λ
0°C
= 0,033 W/mK. Very good ozone resistance, UV-resistant.
---Wall thickness: 13mm/20mm
Lengths and Size Available:
---Sizes: DN12 (R1/2”),DN16(R3/4”),DN20(R1”)
---Lengths: 10m,15m,20m,25m,30m
Pre-insulated Solar Hose
Pre-insulated Twin Solar Hose
---Easy for installation
---Excellent UV ,Weathering resistance
Features:
---Easy for installation
---Excellent UV ,Weathering resistance
---Extremely suitable for solar thermal system
Pre-insulated twin-tube system
, consisting of: AEROFLEX insulation of EPDM, 2 x corrugated stainless steel tubes (feed and return), black protection film, UV-resistant, Silicone-sensor line 2 x 0,0.75² VDE
Corrugated stainless steel tube:
--
Material :SUS304/316L
-- High Flexibility
--Recommended pressure at 200 °C DN 16/11 bar; DN 20/11 bar.
Insulation AEROFLEX-tube
of EPDM,
---Light, flexible, closed cell, synthetic caoutchouc;
---Free of PVC, CFC. Material class: B2 according to DIN 4102.
---No embrittlement of copper and stainless steel pipes according to DIN 1988 part 7;
---Dimensions according to DIN 52 275-2.
---Long term temperature stability up to +150°C; short term up to +175°C (stagnation temperature of the collectors).
---The characteristic value of thermal conductivity at +40 °C, λ
40°C
= 0,037 W/mK, at 0 °C, λ
0°C
= 0,033 W/mK. Very good ozone resistance, UV-resistant.
---Wall thickness: 13mm/20mm
Lengths and Size Available:
---Sizes: DN12 (R1/2”),DN16(R3/4”),DN20(R1”)
---Lengths: 10m,15m,20m,25m,30m
---Easy for installation
---Excellent UV ,Weathering resistance
Features:
---Easy for installation
---Excellent UV ,Weathering resistance
---Extremely suitable for solar thermal system
Pre-insulated twin-tube system
, consisting of: AEROFLEX insulation of EPDM, 2 x corrugated stainless steel tubes (feed and return), black protection film, UV-resistant, Silicone-sensor line 2 x 0,0.75² VDE
Corrugated stainless steel tube:
--
Material :SUS304/316L
-- High Flexibility
--Recommended pressure at 200 °C DN 16/11 bar; DN 20/11 bar.
Insulation AEROFLEX-tube
of EPDM,
---Light, flexible, closed cell, synthetic caoutchouc;
---Free of PVC, CFC. Material class: B2 according to DIN 4102.
---No embrittlement of copper and stainless steel pipes according to DIN 1988 part 7;
---Dimensions according to DIN 52 275-2.
---Long term temperature stability up to +150°C; short term up to +175°C (stagnation temperature of the collectors).
---The characteristic value of thermal conductivity at +40 °C, λ
40°C
= 0,037 W/mK, at 0 °C, λ
0°C
= 0,033 W/mK. Very good ozone resistance, UV-resistant.
---Wall thickness: 13mm/20mm
Lengths and Size Available:
---Sizes: DN12 (R1/2”),DN16(R3/4”),DN20(R1”)
---Lengths: 10m,15m,20m,25m,30m
Precise Steel Axle Shaft
Precise Steel Axle Shaft
ISO 9001 Certified
Your High-quality Partners
The Expert of The Metal Parts Factory
shaft 2
The Expert of Precise Steel Axle Shaft Manufacturing
We can supply below services
Stamping
:5ton-630ton,Thickness 0.5-20mm
Machining
:Turning,Milling,Boring,Grinding,Drilling and so on
Die Casting
:is a metal casting process that is characterized by forcing molten metal under high pressure into a mold cavity
Forgining
:is able to supply forging for application where minimal weight and high strength are the governing requirements
Investment Casting
:Due to the nearly unlimited freedom of design ,every formed component is suited for investment casting
Gears & Gear Shafts
:Spur gears, helical gears, herringbone gears ,bevel gears, hypoid gears, crossed helical gears, worm gears, rack and pinion.
Laser Cutting
:provided rapid precision laser cutting of metal sheet from prototype through production
Tube Parts
:please to offer its customers a fully specialized bespoke tube parts service.
Powder metallurgy
:sinter parts, stainless steel part, mechanical components and so on.
Cold Forming
:is a cold working process where the material is squeezed into a die and the finished parts assume the shape of the die.
Aluminum Extrusion Profiles
:we offers great flexibility in solving aluminum profile needs; we provide secondary operations
Welding
:MIG Welding,TIG Welding,Spot Welding,
Laser Welding for Different materials.
Assembling
:assembly lines for complex product
Heat Treatment
:Include quenching,High-frequency hardening,quenched and tempered,tempering,carburizing,nitriding,carbonitriding and so on.
Surface Treatment
:Include plating of Ni,Cr3+,Zn-Ni,Dacromet,No chrome dacromet,silver-Plated,tin,Gold-plated and so on,in full compliance with ROHS requirements and gas nitrided.
Plastic Injection
:We also provide plastic injection processing, the maximum capacity 3000g
shaft 2
ISO 9001 Certified
Your High-quality Partners
The Expert of The Metal Parts Factory
shaft 2
The Expert of Precise Steel Axle Shaft Manufacturing
We can supply below services
Stamping
:5ton-630ton,Thickness 0.5-20mm
Machining
:Turning,Milling,Boring,Grinding,Drilling and so on
Die Casting
:is a metal casting process that is characterized by forcing molten metal under high pressure into a mold cavity
Forgining
:is able to supply forging for application where minimal weight and high strength are the governing requirements
Investment Casting
:Due to the nearly unlimited freedom of design ,every formed component is suited for investment casting
Gears & Gear Shafts
:Spur gears, helical gears, herringbone gears ,bevel gears, hypoid gears, crossed helical gears, worm gears, rack and pinion.
Laser Cutting
:provided rapid precision laser cutting of metal sheet from prototype through production
Tube Parts
:please to offer its customers a fully specialized bespoke tube parts service.
Powder metallurgy
:sinter parts, stainless steel part, mechanical components and so on.
Cold Forming
:is a cold working process where the material is squeezed into a die and the finished parts assume the shape of the die.
Aluminum Extrusion Profiles
:we offers great flexibility in solving aluminum profile needs; we provide secondary operations
Welding
:MIG Welding,TIG Welding,Spot Welding,
Laser Welding for Different materials.
Assembling
:assembly lines for complex product
Heat Treatment
:Include quenching,High-frequency hardening,quenched and tempered,tempering,carburizing,nitriding,carbonitriding and so on.
Surface Treatment
:Include plating of Ni,Cr3+,Zn-Ni,Dacromet,No chrome dacromet,silver-Plated,tin,Gold-plated and so on,in full compliance with ROHS requirements and gas nitrided.
Plastic Injection
:We also provide plastic injection processing, the maximum capacity 3000g
shaft 2
15W New Portable Solar Power System
Portable Solar Power System
1.Solar Power:15W
2.Battery Capacy:12A
3.Certification:CE & FCC & ROHS
4.Solar power system
Portable Solar Power System
1.Solar Power:15W
2.Battery Capacy:12A
3.Certification:CE & FCC & ROHS
4.Solar power system
15W Portable Solar Power System
Characteristics
: The system has high conversion of silicon solar cell, high euphotic rate and mechanical strength, good resistance to climate, preventing wind, hail. Which can effectively resist corrosion of moisture and salt fog,.conversion efficiency can be more than 15%, temperature range: - 25 to 80 degrees Celsius.
Applicance range
: Electronic appliances such as mobilephone charging, notebook computers, lights, digital camera, video camera, TV, electric tools, music CD, DVD, electric power whose voltage is in 50Hz,220V, Design and manufacture as the small AC/DC power supply system, for farmers in remote areas, and posts, fieldwork, small tourist camping It is the necessary perfect product in the portable office, fieldwork,and cutoff.
Operation:
1 When product is produced,the power switch is "OFF", turning "ON" when using.
2. Clicking " Light touch switch " ,LED digital diode display "6." ,showing off and on. meantime,AC220V DC12V output.
3 LED1 is "blue" when solar light charge for built-in battery.
4 LED2 is "green" when built-in battery working on a normal voltage, if turn red , "shows that built-in battery has a low working voltage.
5. LED3 is "red" when output works normally.
Technical parameters:
Solar panel:
18V /15w
Working voltage:18V
Working current:0.8A
Open-circuit voltage:21.6V
Short-circuit current:0.84A
Maximum system voltage:1000V
Short-circuit current temperature coefficient: 2.0 MA/°C
open-circuit voltage temperature coefficient: - 0.078 V/°C
Major system configuration:
1 Solar panels parameters :15W (monocrystalline or polycrystalline)
2 System controller :12V / 24 rotation 10A and intelligent control, LEDdisplay
3 Lead-acid battery:12V12AH full sealed waterproof and moistureproof
inverter, AC220V 150W
output voltage: DC 12V AC 220V voltage ( special for 110V)
cabinet : 508*332*73mm
weight:
6.8 KG
This system can support:
Name of designed electrical load
model
POWER
Consumption Quantity
Daily working time
Daily consumption power
Lighting product
energy-saving light
5W
1
3
15Wh
Applicace product
fan
25W
1
2
50Wh
Working product
notebook
45W
1
2
90WH
Total
80W
155Wh
The above information is only for reference. Our R&D team can design the systerm according to the local natural resources and customers specific requirements.
1.Solar Power:15W
2.Battery Capacy:12A
3.Certification:CE & FCC & ROHS
4.Solar power system
Portable Solar Power System
1.Solar Power:15W
2.Battery Capacy:12A
3.Certification:CE & FCC & ROHS
4.Solar power system
15W Portable Solar Power System
Characteristics
: The system has high conversion of silicon solar cell, high euphotic rate and mechanical strength, good resistance to climate, preventing wind, hail. Which can effectively resist corrosion of moisture and salt fog,.conversion efficiency can be more than 15%, temperature range: - 25 to 80 degrees Celsius.
Applicance range
: Electronic appliances such as mobilephone charging, notebook computers, lights, digital camera, video camera, TV, electric tools, music CD, DVD, electric power whose voltage is in 50Hz,220V, Design and manufacture as the small AC/DC power supply system, for farmers in remote areas, and posts, fieldwork, small tourist camping It is the necessary perfect product in the portable office, fieldwork,and cutoff.
Operation:
1 When product is produced,the power switch is "OFF", turning "ON" when using.
2. Clicking " Light touch switch " ,LED digital diode display "6." ,showing off and on. meantime,AC220V DC12V output.
3 LED1 is "blue" when solar light charge for built-in battery.
4 LED2 is "green" when built-in battery working on a normal voltage, if turn red , "shows that built-in battery has a low working voltage.
5. LED3 is "red" when output works normally.
Technical parameters:
Solar panel:
18V /15w
Working voltage:18V
Working current:0.8A
Open-circuit voltage:21.6V
Short-circuit current:0.84A
Maximum system voltage:1000V
Short-circuit current temperature coefficient: 2.0 MA/°C
open-circuit voltage temperature coefficient: - 0.078 V/°C
Major system configuration:
1 Solar panels parameters :15W (monocrystalline or polycrystalline)
2 System controller :12V / 24 rotation 10A and intelligent control, LEDdisplay
3 Lead-acid battery:12V12AH full sealed waterproof and moistureproof
inverter, AC220V 150W
output voltage: DC 12V AC 220V voltage ( special for 110V)
cabinet : 508*332*73mm
weight:
6.8 KG
This system can support:
Name of designed electrical load
model
POWER
Consumption Quantity
Daily working time
Daily consumption power
Lighting product
energy-saving light
5W
1
3
15Wh
Applicace product
fan
25W
1
2
50Wh
Working product
notebook
45W
1
2
90WH
Total
80W
155Wh
The above information is only for reference. Our R&D team can design the systerm according to the local natural resources and customers specific requirements.
Precut Leady Solar Tabbing Wire / Solar PV Ribbons (Size: 2x0.2, 2x0.15, 1.8x0.16, 1.6x0.2mm)
Leady Pre cut Solar Tabbing Wire(Size: 2x0.2, 2x0.15, 1.8x0.16, 1.6x0.2mm)
Coating Component: Sn 62%, Pb 34%, Ag 3%
Leady Pre cut Solar Tabbing Wire / Solar PV Ribbons (Size: 2x0.2, 2x0.15, 1.8x0.16, 1.6x0.2mm)
Dimension:
2x0.2, 2x0.15, 1.8x0.16, 1.6x0.2mm )
( If you need other sizes, pls come to us for more information ~ )
Length:
250mm, it is regular size and can be applied to 125 and 156 solar cells
( If you need to cut to other lengths, pls contact us ! )
Coating Component:
Sn 62%, Pb 34%, Ag 3%
Base Material:
oxygen-free copper ( TU1 or CAD-110 or UNS C11000)
Main Parameter
For Our Leady Solar Tabbing Wire:
Test Items
Standard Values
Units
Base Material
TUI or CAD-110 or UNS C11000
Base Size
Width±0.05, thickness±0.015
mm
Base Resistivity
≤0.0170
Ω•mm2/m
Coat Thickness
0.05±0.015, double-faced
mm
Solder Strip Resistence
≤0.0248
Ω•mm2/m
Anti-tensile Strength
≥200
Mpa
Yield Strength
<70
HV
Elongation
≥20
%
Width Tolerance
±0.05
mm
Thickness Tolerance
±0.015
mm
Length Tolerance
1.5
mm
Side Camber
≤5
mm/m
Surface Roughness
It shows metal brightness, none of discolored, plating,haze spot and rustiness, and none of scratch, tin nubble and burr defect on tape surface.
Besides tabbing wire 2x0.15mm, we also produce other sizes as below:
Dimension
Thickness of base copper
Coat per side
Width tolerance
Thickness tolerance
Width x Thickness
0.8×0.08
0.05
0.015
±0.05
±0.015
0.8×0.10
0.05
0.025
±0.05
±0.015
1.0×0.08
0.05
0.015
±0.05
±0.015
1.0×0.10
0.05
0.025
±0.05
±0.015
1.5×0.15
0.1
0.025
±0.05
±0.015
1.5×0.20
0.15
0.025
±0.05
±0.015
1.6×0.15
0.1
0.025
±0.05
±0.015
1.6×0.18
0.125
0.275
±0.05
±0.015
1.6×0.20
0.15
0.025
±0.05
±0.015
1.8×0.15
0.1
0.025
±0.05
±0.015
1.8×0.16
0.11
0.025
±0.05
±0.015
1.8×0.18
0.125
0.0275
±0.05
±0.015
1.8×0.20
0.15
0.025
±0.05
±0.015
2.0×0.13
0.08
0.025
±0.05
±0.015
2.0×0.15
0.1
0.025
±0.05
±0.015
2.0×0.16
0.11
0.025
±0.05
±0.015
2.0×0.18
0.125
0.0275
±0.05
±0.015
2.0×0.20
0.15
0.025
±0.05
±0.015
We can cut tabbing wires in the above dimensions as per your length !
Packings for our pre cut solar wires:
(Uncut)
(Cut)
Coating Component: Sn 62%, Pb 34%, Ag 3%
Leady Pre cut Solar Tabbing Wire / Solar PV Ribbons (Size: 2x0.2, 2x0.15, 1.8x0.16, 1.6x0.2mm)
Dimension:
2x0.2, 2x0.15, 1.8x0.16, 1.6x0.2mm )
( If you need other sizes, pls come to us for more information ~ )
Length:
250mm, it is regular size and can be applied to 125 and 156 solar cells
( If you need to cut to other lengths, pls contact us ! )
Coating Component:
Sn 62%, Pb 34%, Ag 3%
Base Material:
oxygen-free copper ( TU1 or CAD-110 or UNS C11000)
Main Parameter
For Our Leady Solar Tabbing Wire:
Test Items
Standard Values
Units
Base Material
TUI or CAD-110 or UNS C11000
Base Size
Width±0.05, thickness±0.015
mm
Base Resistivity
≤0.0170
Ω•mm2/m
Coat Thickness
0.05±0.015, double-faced
mm
Solder Strip Resistence
≤0.0248
Ω•mm2/m
Anti-tensile Strength
≥200
Mpa
Yield Strength
<70
HV
Elongation
≥20
%
Width Tolerance
±0.05
mm
Thickness Tolerance
±0.015
mm
Length Tolerance
1.5
mm
Side Camber
≤5
mm/m
Surface Roughness
It shows metal brightness, none of discolored, plating,haze spot and rustiness, and none of scratch, tin nubble and burr defect on tape surface.
Besides tabbing wire 2x0.15mm, we also produce other sizes as below:
Dimension
Thickness of base copper
Coat per side
Width tolerance
Thickness tolerance
Width x Thickness
0.8×0.08
0.05
0.015
±0.05
±0.015
0.8×0.10
0.05
0.025
±0.05
±0.015
1.0×0.08
0.05
0.015
±0.05
±0.015
1.0×0.10
0.05
0.025
±0.05
±0.015
1.5×0.15
0.1
0.025
±0.05
±0.015
1.5×0.20
0.15
0.025
±0.05
±0.015
1.6×0.15
0.1
0.025
±0.05
±0.015
1.6×0.18
0.125
0.275
±0.05
±0.015
1.6×0.20
0.15
0.025
±0.05
±0.015
1.8×0.15
0.1
0.025
±0.05
±0.015
1.8×0.16
0.11
0.025
±0.05
±0.015
1.8×0.18
0.125
0.0275
±0.05
±0.015
1.8×0.20
0.15
0.025
±0.05
±0.015
2.0×0.13
0.08
0.025
±0.05
±0.015
2.0×0.15
0.1
0.025
±0.05
±0.015
2.0×0.16
0.11
0.025
±0.05
±0.015
2.0×0.18
0.125
0.0275
±0.05
±0.015
2.0×0.20
0.15
0.025
±0.05
±0.015
We can cut tabbing wires in the above dimensions as per your length !
Packings for our pre cut solar wires:
(Uncut)
(Cut)
Premium MPPT Series 50A~160A
Optimal Solar Maximum Power Point Tracking
Solar Charge Controller
Can be paralleled (Max. 16 sets)
Character:
Battery charge management, state of charge information.
Built-in Battery Energy Monitor tracks Power production and consumption to calculate the energy remaining in battery state of charge (SOC) is displayed in percent full, Amp-hours, Watt-hours, and 90days of energy-harvest history is stored in the solar charger.
Continuous output Power Rating without de-rating at up to 50°C ambient temperature.
Supports Flooded Lead Acid (FLA), GEL, and Absorbed Glass Mat (AGM) batteries, 2/3/4 Stage charging with adjustable set point.
Wire the PV modules in series up to 112VDC normal (140VDC Max).
Built-in temperature compensation function for safe and complete charging.
Description:
Optimal Solar Maximum Power Point Tracking
Solar Charge Controller
Can be paralleled (Max. 16 sets) at will, according to your demand.
Specifications:
Model No.
PM-SCC-50AM
Maximum output current
(Continuous at up 50°C ambient temperature)
50 Amps
Battery Voltages
12,24,36,48 VDC Normal
Max PV Input Current
40 Amps
Input Voltage Range
16~112VDC Operating
140VDC Maximum
Open Circuit Voltage
Max PV Array Power
3250 Watts
(Maximum when equalizing a 48V battery to 64V at 50 Amps)
Charge Regulation Modes
Bulk, Absorption, Float, Auto/ Manual Equalization
Battery Temperature Compensation
5.0 mV per°C, per 2 volt cell
DC to DC Conversion Capability
12V Battery: 16~112VDC
24V Battery: 32~112VDC
36V Battery: 48~112VDC
48V Battery: 64~112VDC
Display Status
Built-in 2-line, 20-character LCD with backlight
LCD status screen displays input voltage and current, output voltage and current, charge-mode, Battery SOC
Data Logging
Logs energy harvested for 90 days, LCD displays WH, KWH, AH
Energy Monitor
LCD shows SOC, AH, WH, and present charge or discharge current. A 50mV/ 500Amp shunt is required to use
Auxiliary Relays
Two independent relays with from A (SPST) contacts for control of external devices. Contact rating is 3 Amps, 50VDC
Operation Temperature
Full Power Output to +50°C ambient
Standby Power
< 2 Watts
Dimension
267.6 x 196 x 147 mm
Weight
4.3 Kgs
Solar Charge Controller
Can be paralleled (Max. 16 sets)
Character:
Battery charge management, state of charge information.
Built-in Battery Energy Monitor tracks Power production and consumption to calculate the energy remaining in battery state of charge (SOC) is displayed in percent full, Amp-hours, Watt-hours, and 90days of energy-harvest history is stored in the solar charger.
Continuous output Power Rating without de-rating at up to 50°C ambient temperature.
Supports Flooded Lead Acid (FLA), GEL, and Absorbed Glass Mat (AGM) batteries, 2/3/4 Stage charging with adjustable set point.
Wire the PV modules in series up to 112VDC normal (140VDC Max).
Built-in temperature compensation function for safe and complete charging.
Description:
Optimal Solar Maximum Power Point Tracking
Solar Charge Controller
Can be paralleled (Max. 16 sets) at will, according to your demand.
Specifications:
Model No.
PM-SCC-50AM
Maximum output current
(Continuous at up 50°C ambient temperature)
50 Amps
Battery Voltages
12,24,36,48 VDC Normal
Max PV Input Current
40 Amps
Input Voltage Range
16~112VDC Operating
140VDC Maximum
Open Circuit Voltage
Max PV Array Power
3250 Watts
(Maximum when equalizing a 48V battery to 64V at 50 Amps)
Charge Regulation Modes
Bulk, Absorption, Float, Auto/ Manual Equalization
Battery Temperature Compensation
5.0 mV per°C, per 2 volt cell
DC to DC Conversion Capability
12V Battery: 16~112VDC
24V Battery: 32~112VDC
36V Battery: 48~112VDC
48V Battery: 64~112VDC
Display Status
Built-in 2-line, 20-character LCD with backlight
LCD status screen displays input voltage and current, output voltage and current, charge-mode, Battery SOC
Data Logging
Logs energy harvested for 90 days, LCD displays WH, KWH, AH
Energy Monitor
LCD shows SOC, AH, WH, and present charge or discharge current. A 50mV/ 500Amp shunt is required to use
Auxiliary Relays
Two independent relays with from A (SPST) contacts for control of external devices. Contact rating is 3 Amps, 50VDC
Operation Temperature
Full Power Output to +50°C ambient
Standby Power
< 2 Watts
Dimension
267.6 x 196 x 147 mm
Weight
4.3 Kgs
Premium Series~30A, 45A, 60A
The world's leading solar charge controller for both professional and consumer applications.
Character:
Battery charging, load control or diversion regulation.
Highest reliability - large heat sink and conservative design enables operating at full ratings to 45°C.
More information - Internal and optional meter displays extensive system and controller information, automatic self-test and reset.
Displays can be in multi-languages.
Communications capability - RS-422 connects to a personal computer for custom settings, data logging and remote monitoring and control.
Fully adjustable - DIP switch provides user with choice of 7 digital presets.
Additional custom settings via RS-422.
Extensive electronic protections - Fully protected against reverse polarity, short circuit, overcurrent, high temperature and overvoltage.
Parallel connection (Max. 10 sets)
Description:
The world's leading solar charge controller for both professional and consumer applications.
3 Stage pulse width modulated charge control.
Can be paralleled (Max. 10 sets) at will, according to your demand.
Specifications:
Model No.
PM-SCC-60AP-1248
Electrical Specifications
Rated solar, load or diversion current
60A
System Voltage
12V 24V 48V
Accuracy
12/24V: ≤0.1% ±50mV, 48V: ≤0.1% ±100mV
Min. voltage to operate
9V
Max. solar voltage (Voc)
140V
Max. operating voltage
68V
Self-consumption
While operating -25mA, at Idle -3mA
Meter 7.5mA
Environmental Specifications
Operating ambient temperature
Controller -40°C to +45°C
Storage temperature: -55°C to +85°C
Humidity
100% (non-condensing)
Tropicalization
Conformal coating on both sides of all printed circuit boards
Electronic Protections
Reverse polarity protection (any combination)
Short-circuit protection
Overcurrent protection
Lightning and transient surge protection using 4500W transient voltage suppressors
High temperature protection via automatic current reduction or complete shut down
Prevents reverse current from battery at night
Mechanical Specifications
Dimensions (L x W x H mm)
127 x 75 x 266
Weight (by Kg/s)
2.00
Power Terminals
60A Rated
Character:
Battery charging, load control or diversion regulation.
Highest reliability - large heat sink and conservative design enables operating at full ratings to 45°C.
More information - Internal and optional meter displays extensive system and controller information, automatic self-test and reset.
Displays can be in multi-languages.
Communications capability - RS-422 connects to a personal computer for custom settings, data logging and remote monitoring and control.
Fully adjustable - DIP switch provides user with choice of 7 digital presets.
Additional custom settings via RS-422.
Extensive electronic protections - Fully protected against reverse polarity, short circuit, overcurrent, high temperature and overvoltage.
Parallel connection (Max. 10 sets)
Description:
The world's leading solar charge controller for both professional and consumer applications.
3 Stage pulse width modulated charge control.
Can be paralleled (Max. 10 sets) at will, according to your demand.
Specifications:
Model No.
PM-SCC-60AP-1248
Electrical Specifications
Rated solar, load or diversion current
60A
System Voltage
12V 24V 48V
Accuracy
12/24V: ≤0.1% ±50mV, 48V: ≤0.1% ±100mV
Min. voltage to operate
9V
Max. solar voltage (Voc)
140V
Max. operating voltage
68V
Self-consumption
While operating -25mA, at Idle -3mA
Meter 7.5mA
Environmental Specifications
Operating ambient temperature
Controller -40°C to +45°C
Storage temperature: -55°C to +85°C
Humidity
100% (non-condensing)
Tropicalization
Conformal coating on both sides of all printed circuit boards
Electronic Protections
Reverse polarity protection (any combination)
Short-circuit protection
Overcurrent protection
Lightning and transient surge protection using 4500W transient voltage suppressors
High temperature protection via automatic current reduction or complete shut down
Prevents reverse current from battery at night
Mechanical Specifications
Dimensions (L x W x H mm)
127 x 75 x 266
Weight (by Kg/s)
2.00
Power Terminals
60A Rated
Premium Solar Charger - Ultra Thin Solar Powered Backup Battery and Charger for Cell Phones, iPhone, iPod--Solar Mobile Charger
1. Portable solar mobile charger
2. Meet an emergency by solar mobile charger
3. Environment protect
4. Moblie Phone Charger
Description:
1. This product is a multi-function solar emergency mobile charger.
2. Building in 1350mAh high capacity rechargeable polymer battery.
3. You can charge your mobile phone, digital camera, PDA, MP3,MP4 whenever and wherever.
4. Style design and convenient to take to it with you.
How it works:
Please follow these steps:
1. Charge your solar energy emergency charger before use, there are 3 method:
a. Put the charger under the sunshine, the solar energy will convert to electrical energy and charge the build in rechargeable battery.
b. Charge with an AC adapter. During charging the green indicator of the adapter will be always bright. After charging, the indicator illuminates. (this adapter is used for this unit only and provided with auto protection design).
Do not charge this unit with an adapter not suitable for this unit!!!
2. Connector your connector adapter to the extended cable and then connect to the charger.
3. Connect your phone or other digital products to the connector.
4. Your phone or other digital products indicates that it is charging now you can use your mobile phone while charging.
Products Performance:
1.
Meet an emergency
When you go to outside or power cut, you also can use your mobile phone with solar mobile charger.
2. Convenience,
Whenever and wherever you are, you can charge your moile phone in time, and you can talk with others when charging.
3. High Effciency,
Charging 60 minutes, the charger could transfer energy from the build in battery to your mobile phone battery, and could talking 100-150 minutes.
4. Environment Protect, Save Resource,
You can use solar energy to charge your mobile phone whenever and wherever.
5. Modem and Portable
Modem design, stainless steel case, small size, convenient to take it with you
6. Safe use
Over voltage protection for the circuit and your mobile phone. Smart charge, safe use.
Products Characteristic:
1. High solar energy convert effciency: over than 15%
2. Solar energy board: 5.5v / 80mA
3. High capacity build in polymer battery: 1350mAH
4. Output voltage: 5.5v
5. Output current: 1000mA
6. Charging time: about 60 minutes (the times is a little different for different mobile phone)
7. To charge the build in battery in the charger using solar energy: 10-15 hours
8. To charge the build in battery in the charger using computer or AC adapter: about 5 hours
Fits For:
Mobile Phone (standard accessory are five kinds of phone connector adapter: Nokia, Samsung,Motorola, Sony-Ericssion,)
Digital Camera
PDA
Mp3
Mp4 (The battery capacity under 1200mAH)
Announcement:
1. Don't scrape the surface of the solar energy board with sharp object.
2. Please put your solar energy under the sunshine directly and the solar board side is uptumed if you charge it with solar energy.
3. Don't charge the build in battery in your charger for too long time, if you charge it with computer or AC adapter.
4.Don't use other AC adapter to charge the solar charger.
5. Don't put your charger in the rain.
6. In case of short circuit protection, all you need to do is unplug short-circuit plus load, after which power supply will resume in 10 seconds.
2. Meet an emergency by solar mobile charger
3. Environment protect
4. Moblie Phone Charger
Description:
1. This product is a multi-function solar emergency mobile charger.
2. Building in 1350mAh high capacity rechargeable polymer battery.
3. You can charge your mobile phone, digital camera, PDA, MP3,MP4 whenever and wherever.
4. Style design and convenient to take to it with you.
How it works:
Please follow these steps:
1. Charge your solar energy emergency charger before use, there are 3 method:
a. Put the charger under the sunshine, the solar energy will convert to electrical energy and charge the build in rechargeable battery.
b. Charge with an AC adapter. During charging the green indicator of the adapter will be always bright. After charging, the indicator illuminates. (this adapter is used for this unit only and provided with auto protection design).
Do not charge this unit with an adapter not suitable for this unit!!!
2. Connector your connector adapter to the extended cable and then connect to the charger.
3. Connect your phone or other digital products to the connector.
4. Your phone or other digital products indicates that it is charging now you can use your mobile phone while charging.
Products Performance:
1.
Meet an emergency
When you go to outside or power cut, you also can use your mobile phone with solar mobile charger.
2. Convenience,
Whenever and wherever you are, you can charge your moile phone in time, and you can talk with others when charging.
3. High Effciency,
Charging 60 minutes, the charger could transfer energy from the build in battery to your mobile phone battery, and could talking 100-150 minutes.
4. Environment Protect, Save Resource,
You can use solar energy to charge your mobile phone whenever and wherever.
5. Modem and Portable
Modem design, stainless steel case, small size, convenient to take it with you
6. Safe use
Over voltage protection for the circuit and your mobile phone. Smart charge, safe use.
Products Characteristic:
1. High solar energy convert effciency: over than 15%
2. Solar energy board: 5.5v / 80mA
3. High capacity build in polymer battery: 1350mAH
4. Output voltage: 5.5v
5. Output current: 1000mA
6. Charging time: about 60 minutes (the times is a little different for different mobile phone)
7. To charge the build in battery in the charger using solar energy: 10-15 hours
8. To charge the build in battery in the charger using computer or AC adapter: about 5 hours
Fits For:
Mobile Phone (standard accessory are five kinds of phone connector adapter: Nokia, Samsung,Motorola, Sony-Ericssion,)
Digital Camera
PDA
Mp3
Mp4 (The battery capacity under 1200mAH)
Announcement:
1. Don't scrape the surface of the solar energy board with sharp object.
2. Please put your solar energy under the sunshine directly and the solar board side is uptumed if you charge it with solar energy.
3. Don't charge the build in battery in your charger for too long time, if you charge it with computer or AC adapter.
4.Don't use other AC adapter to charge the solar charger.
5. Don't put your charger in the rain.
6. In case of short circuit protection, all you need to do is unplug short-circuit plus load, after which power supply will resume in 10 seconds.
Friday, July 1, 2011
Pressure Solar Water Heater System
Pressure Solar Water Heater System
1.Vacuum Tube Solar Water Heater
2.Copper Coil/Pipe Solar Water Heater
3.Pressure Solar
Pressure Solar Water Heater System
Compact pressurized Solar Water Heater (LC-HP01)
Characters:
Working with high pressure, so do the water it produces. It uses the
heat pipe
to deliver the heat energy, it can work rapidly. Each tube can work alone, so it can still work in the event of occasional tube breakage.
Material:
Inner tank: SUS304-1.5mm/2.0mm;
Vacuum tube: QB-AL-N/AL-58-1800
Outer tank: Colored steel/Stainless steel, thickness: 0.5mm
Reflector: aluminum component/stainless steel.
1.Vacuum Tube Solar Water Heater
2.Copper Coil/Pipe Solar Water Heater
3.Pressure Solar
Pressure Solar Water Heater System
Compact pressurized Solar Water Heater (LC-HP01)
Characters:
Working with high pressure, so do the water it produces. It uses the
heat pipe
to deliver the heat energy, it can work rapidly. Each tube can work alone, so it can still work in the event of occasional tube breakage.
Material:
Inner tank: SUS304-1.5mm/2.0mm;
Vacuum tube: QB-AL-N/AL-58-1800
Outer tank: Colored steel/Stainless steel, thickness: 0.5mm
Reflector: aluminum component/stainless steel.
Pressure solar water heater
Pressure Solar water heater with Solar Keymark
Unique design and more service life.
Stable performance even in -35 degree
Patent design pressure Solar water heaterwith an external manifold below the inner tank which greatly reduced the risky of leakage problem and different from normal solar tank just punched heat pipe sockets on inner tank directly.
Enamel lining tank guaranteed long service life.
Unique elegant outlook always catch client’s eyes in first time.
Conveniently installation no so many accessories required such as pump station.
Pressurized system which can bear 6 Bar working pressure.
The backup 2Kw electric heater can ensure the hot water in rainy and cloudy days.
Excellent heat-protection of Heat pipe vacuum tubes ensure the MHP system can be used widely in both warm and freeze area.
Easy to change the accessories like T/P security vale, Magnesium anode, Check valve , even the water inlet and outlet welded on the tank flange can be detachable in future for some case.
Adjustable stands meet your different installation angle.
Production Model
MHP-58/20
MHP-58/26
Numbers of tube(pc)
20
26
Absorber area approx.(m2)
1.62
2.11
Aperture area(m2)
1.90
2.47
Gross area(m2)
2.88
3.80
Mounting angle range
(
β
)
35° 40° 45° 50°
Weight Empty(kg)
125
145
Container Loading in 20GP/40GP
37/74
26/52
Tank Capacity(Lr)
180
240
ΔT (17MJ/m2.day)
35
°C
Maximum operation pressure
(
bar
)
6
Testing pressure
(
bar
)
9
Electric element power
(
KW
)
2
2
Unique design and more service life.
Stable performance even in -35 degree
Patent design pressure Solar water heaterwith an external manifold below the inner tank which greatly reduced the risky of leakage problem and different from normal solar tank just punched heat pipe sockets on inner tank directly.
Enamel lining tank guaranteed long service life.
Unique elegant outlook always catch client’s eyes in first time.
Conveniently installation no so many accessories required such as pump station.
Pressurized system which can bear 6 Bar working pressure.
The backup 2Kw electric heater can ensure the hot water in rainy and cloudy days.
Excellent heat-protection of Heat pipe vacuum tubes ensure the MHP system can be used widely in both warm and freeze area.
Easy to change the accessories like T/P security vale, Magnesium anode, Check valve , even the water inlet and outlet welded on the tank flange can be detachable in future for some case.
Adjustable stands meet your different installation angle.
Production Model
MHP-58/20
MHP-58/26
Numbers of tube(pc)
20
26
Absorber area approx.(m2)
1.62
2.11
Aperture area(m2)
1.90
2.47
Gross area(m2)
2.88
3.80
Mounting angle range
(
β
)
35° 40° 45° 50°
Weight Empty(kg)
125
145
Container Loading in 20GP/40GP
37/74
26/52
Tank Capacity(Lr)
180
240
ΔT (17MJ/m2.day)
35
°C
Maximum operation pressure
(
bar
)
6
Testing pressure
(
bar
)
9
Electric element power
(
KW
)
2
2
Pressure split heat pipe solar hot water heater system
Solar water heater system pressure split heat pipe solar hot water heating collector system porcelain enamel water storage tank.
Solar water heater system pressure split heat pipe solar hot water heating collector system porcelain enamel water storage tank
1. Reliable and efficient twin-glass solar tubes
2. Copper heat pipes for rapid heat transfer
3. Easy plug-in installation
4. Free maintenance
5. Suitable for mains pressure water (up to 8 bar/116psi)
6. Corrosion resistant silver brazed copper header
7. Powder coated (black, brown or silver) aluminum casing
8. Stable solar conversion throughout the day (tubes passively track the sun)
9. The perfect solar collector for domestic solar water heater systems
10. Ideal for commercial solar water heating applications
Item
Model
No. of
Heat pipe
Dia. & Len.
(mm) of Heat pipe
Water holding capacity (L)
Aperture area (m2)
Working pressure
(Mpa)
CB-58-1800-12
12
58-1800
100
1.62
0.6
CB-58-1800-15
15
58-1800
125
2.04
0.6
CB-58-1800-20
20
58-1800
150
2.72
0.6
CB-58-1800-24
24
58-1800
200
3.28
0.6
CB-58-1800-30
30
58-1800
250
4.12
0.6
Solar water heater system pressure split heat pipe solar hot water heating collector system porcelain enamel water storage tank
1. Reliable and efficient twin-glass solar tubes
2. Copper heat pipes for rapid heat transfer
3. Easy plug-in installation
4. Free maintenance
5. Suitable for mains pressure water (up to 8 bar/116psi)
6. Corrosion resistant silver brazed copper header
7. Powder coated (black, brown or silver) aluminum casing
8. Stable solar conversion throughout the day (tubes passively track the sun)
9. The perfect solar collector for domestic solar water heater systems
10. Ideal for commercial solar water heating applications
Item
Model
No. of
Heat pipe
Dia. & Len.
(mm) of Heat pipe
Water holding capacity (L)
Aperture area (m2)
Working pressure
(Mpa)
CB-58-1800-12
12
58-1800
100
1.62
0.6
CB-58-1800-15
15
58-1800
125
2.04
0.6
CB-58-1800-20
20
58-1800
150
2.72
0.6
CB-58-1800-24
24
58-1800
200
3.28
0.6
CB-58-1800-30
30
58-1800
250
4.12
0.6
Pressurized Heat Pipe Solar Collector(CE,ISO9001,CCC)
1. Certificate: CE,CCC,ISO9001,ISO14001
2. Prompt delivery
3. OEM service
4. 1% spare parts for free
Pressurized Heat Pipe Solar Collector
Pressurized Heat Pipe Solar Collector
1. it's pressurized system separated with pressurized tank.
2. Manifold is 304 stainless steel, it can resist rusting, or Aluminum painted un-oxygen layer for option.
3. It uses heat pipe to transfer heat energy, and it can used in -35 Celsius degree, if the heat pipe is broken, you only need to change the outer vacuum tubes.
4. it's very popular in Europe.
Technology:
Model Type
SHHPC
Manifold casing material
Aluminum painted un-oxygen layer
Frame material
(Aluminum or Stainless Steel or Galvanized Steel)
and painted Layer
Header pipe material
Copper
Heat pipe material
Copper
Insulation
Polyurethane 55mm or Glass-reinforced polyester
Rubber seals and rings
UV stabilized high temperature silicon rubber
Test pressure
9 bar
Collector mounting
Plane roof/slope roof
Angle of operation
10°C-80°C
Inlet Outlet
Φ22 or 3/4 inch male
Specification:
MODEL
Lighting
(m
2
)
Heat pipe
Supply hot water(L/
°C
)
20/40" container
GW
KG
diameter
length
No.
SHHPC47/12
1.26
Φ47mm
1500mm
12
70/60
133/276
28
SHHPC 47/18
1.80
18
110/60
120/249
42
SHHPC 47/20
2.10
20
125/60
110/227
46
SHHPC 47/30
3.15
30
180/60
76/158
69
SHHPC 58/12
1.73
Φ58mm
1800mm
12
110/60
118/244
40
SHHPC 58/18
2.57
18
150/60
84/175
60
SHHPC 58/20
2.88
20
175/60
77/160
64
SHHPC 58/30
4.32
30
260/60
52/106
98
2. Prompt delivery
3. OEM service
4. 1% spare parts for free
Pressurized Heat Pipe Solar Collector
Pressurized Heat Pipe Solar Collector
1. it's pressurized system separated with pressurized tank.
2. Manifold is 304 stainless steel, it can resist rusting, or Aluminum painted un-oxygen layer for option.
3. It uses heat pipe to transfer heat energy, and it can used in -35 Celsius degree, if the heat pipe is broken, you only need to change the outer vacuum tubes.
4. it's very popular in Europe.
Technology:
Model Type
SHHPC
Manifold casing material
Aluminum painted un-oxygen layer
Frame material
(Aluminum or Stainless Steel or Galvanized Steel)
and painted Layer
Header pipe material
Copper
Heat pipe material
Copper
Insulation
Polyurethane 55mm or Glass-reinforced polyester
Rubber seals and rings
UV stabilized high temperature silicon rubber
Test pressure
9 bar
Collector mounting
Plane roof/slope roof
Angle of operation
10°C-80°C
Inlet Outlet
Φ22 or 3/4 inch male
Specification:
MODEL
Lighting
(m
2
)
Heat pipe
Supply hot water(L/
°C
)
20/40" container
GW
KG
diameter
length
No.
SHHPC47/12
1.26
Φ47mm
1500mm
12
70/60
133/276
28
SHHPC 47/18
1.80
18
110/60
120/249
42
SHHPC 47/20
2.10
20
125/60
110/227
46
SHHPC 47/30
3.15
30
180/60
76/158
69
SHHPC 58/12
1.73
Φ58mm
1800mm
12
110/60
118/244
40
SHHPC 58/18
2.57
18
150/60
84/175
60
SHHPC 58/20
2.88
20
175/60
77/160
64
SHHPC 58/30
4.32
30
260/60
52/106
98
Pressurized Heat Pipe Solar Collector
Heat Pipe Solar Collector
1.CE,Solar Keymark,CCC,ISO
2.Heat Pipe Solar Collector with EN12975
3.10 Year's Experience
4.OEM
Heat Pipe Solar Collector
-----------------------------WHY JINENG SOLAR----------------------
Primary Competitive Advantages:
1) Solar Keymark, CE, CCC, ISO Certificed
2) Strict Qality Control, Pompt Dlivery
3) Satisfied After-sale Service
4) Environmental Protection
5) 10 Year’s Experience
6) OEM Accepted
Heat Pipe Solar Collector
How heat pipe solar collector works:
1) Solar absorption: Solar radiation is absorbed by the solar tubes and converted into heat.
2) Solar heat transfer: Heat pipes conduct the heat from within the solar tube up to the header pipe
3) Solar energy storage: Water is circulated through the header, via intermittent pump cycling.
Pressurized heat pipe solar collector with EN12975 features:
JINENG SOLAR Solar Collector Specification:
Type:
Vacuum Tube Solar Collector with Heat Pipe
Vacuum Tube:
Borosilicate 3.3, ALN-SS/CU Coated Layer
Tube Dimension
Inner Tube
47mm
Outer Tube
58mm
Length
1800mm
Tube Qty.:
15/18/20/24/30 tubes
Manifold:
Aluminum
Frame:
Aluminum
Vacuum Tightness
5.0*10-3 Pa
Heat Insulation Layer:
Rock Wool
Collector Mounting:
Flat Roof/Sloping Roof
Heat preservation:
72 hours
Hail Resistance:
25mm
Cold Resistence
-40°C
Hot Temp Resistence
260°C
Life
15 Years
Certificate:
CE, Solar Keymark, EN12975-1/2, CCC, ISO9001
Appliance:
Domestic Hot Water Heating, Pool Heating,
Radiant Infloor Heating, Air Heating.
1.CE,Solar Keymark,CCC,ISO
2.Heat Pipe Solar Collector with EN12975
3.10 Year's Experience
4.OEM
Heat Pipe Solar Collector
-----------------------------WHY JINENG SOLAR----------------------
Primary Competitive Advantages:
1) Solar Keymark, CE, CCC, ISO Certificed
2) Strict Qality Control, Pompt Dlivery
3) Satisfied After-sale Service
4) Environmental Protection
5) 10 Year’s Experience
6) OEM Accepted
Heat Pipe Solar Collector
How heat pipe solar collector works:
1) Solar absorption: Solar radiation is absorbed by the solar tubes and converted into heat.
2) Solar heat transfer: Heat pipes conduct the heat from within the solar tube up to the header pipe
3) Solar energy storage: Water is circulated through the header, via intermittent pump cycling.
Pressurized heat pipe solar collector with EN12975 features:
JINENG SOLAR Solar Collector Specification:
Type:
Vacuum Tube Solar Collector with Heat Pipe
Vacuum Tube:
Borosilicate 3.3, ALN-SS/CU Coated Layer
Tube Dimension
Inner Tube
47mm
Outer Tube
58mm
Length
1800mm
Tube Qty.:
15/18/20/24/30 tubes
Manifold:
Aluminum
Frame:
Aluminum
Vacuum Tightness
5.0*10-3 Pa
Heat Insulation Layer:
Rock Wool
Collector Mounting:
Flat Roof/Sloping Roof
Heat preservation:
72 hours
Hail Resistance:
25mm
Cold Resistence
-40°C
Hot Temp Resistence
260°C
Life
15 Years
Certificate:
CE, Solar Keymark, EN12975-1/2, CCC, ISO9001
Appliance:
Domestic Hot Water Heating, Pool Heating,
Radiant Infloor Heating, Air Heating.
Pressurized Heat Pipe Solar Water Heater
Pressurized Heat Pipe Solar Water Heater
1. CE, CCC, ISO9001
2. Especially for poor weather conditions
3. Heat pipe collector
Pressurized Heat Pipe Solar Water Heater
Creats the new efficiency generation
Benefits
1. Especially for poor weather conditions.
2. A superior vacuum in the tube to ensure low heat loss.
3. Anti-freeze liquid to avoid vacuum tube explosion.
4. Supply up to 70% of your annual hot water needs, and save your energy bills.
5. Continuing work for the whole day.
6. 30% higher of the efficiency than flat plate collectors.
7. A single tube can, if necessary, be exchanged without interruption of the heating cycle.
TP Solar Office Building
Pictures for Production Plant
1. CE, CCC, ISO9001
2. Especially for poor weather conditions
3. Heat pipe collector
Pressurized Heat Pipe Solar Water Heater
Creats the new efficiency generation
Benefits
1. Especially for poor weather conditions.
2. A superior vacuum in the tube to ensure low heat loss.
3. Anti-freeze liquid to avoid vacuum tube explosion.
4. Supply up to 70% of your annual hot water needs, and save your energy bills.
5. Continuing work for the whole day.
6. 30% higher of the efficiency than flat plate collectors.
7. A single tube can, if necessary, be exchanged without interruption of the heating cycle.
TP Solar Office Building
Pictures for Production Plant
15W Portable solar power system
1.Portable solar power system
2.Five years manufacture experience
3.ISO,CE certificate
4.Two years warranty
5.Can do OEM
Summarize
Our solar power system includes high-efficiency solar cell modules, special solar battery, solar
controller,solar power generator systems etc. Pollution-free, energy-saving, protecting
environment, free maintenance and less restriction, with low failure rate, easily assembling
and carring, convenient using, its lifespan can reach above 20 years, a variety of charging ways
complementary, solar AC and DC all can charge for the system, one time investment, long-term
benefits. It can be applied to the villa, housing, outdoors, tourist resorts, prairie areas,
remote mountain village, mountain island, household, farms, villages, farm, hills, island, highway
and any regions to generate electricity. (can charge for cell phones, notebook computers, lights,
digital camera, TV set, electric tools, music CDS,DVD,electric power, such as voltage in 220/110V,
50Hz).
Other information pls contact with our sales.
2.Five years manufacture experience
3.ISO,CE certificate
4.Two years warranty
5.Can do OEM
Summarize
Our solar power system includes high-efficiency solar cell modules, special solar battery, solar
controller,solar power generator systems etc. Pollution-free, energy-saving, protecting
environment, free maintenance and less restriction, with low failure rate, easily assembling
and carring, convenient using, its lifespan can reach above 20 years, a variety of charging ways
complementary, solar AC and DC all can charge for the system, one time investment, long-term
benefits. It can be applied to the villa, housing, outdoors, tourist resorts, prairie areas,
remote mountain village, mountain island, household, farms, villages, farm, hills, island, highway
and any regions to generate electricity. (can charge for cell phones, notebook computers, lights,
digital camera, TV set, electric tools, music CDS,DVD,electric power, such as voltage in 220/110V,
50Hz).
Other information pls contact with our sales.
Pressurized Solar Collector
Pressurized Solar Collector,new design of support and more stronger than the old model.the cost price for selling.
Pressurized Solar Collector
Specifications:
Manifold:
Interior: red copper with 1.2mm thickness
Exterior: aluminum alloy with 1.8mm thickness
Maximum pressure: 12bar
Coating of vacuum tube: SS-C/CU 3-high vacuum tubes
Heat preservation: 72 hours
Hail resistance: 25mm
Insulation: polyurethane/rock wool
Optimal installation angle: vertical: 30 to 70 degrees
Pressure drop: 7bar, 3.3L/minute for 20 tube manifold
Optimal flow rate: 0.1L/minute/tube or 0.026G/minute/tube
Heat pipe: anti-freezing less than -35 degrees
Glass tube dimensions: 58mm x 1.8m
Applications:
Domestic, industrial and commercial heating use
Suitable for open or closed (glycol-water)
Space heating
Caravan parks, hotels, schools, public showers/kitchens and restaurants
For large scale water heating
Learn more about products detailed description,pricing and service,Please send mail to us!
Pressurized Solar Collector
Specifications:
Manifold:
Interior: red copper with 1.2mm thickness
Exterior: aluminum alloy with 1.8mm thickness
Maximum pressure: 12bar
Coating of vacuum tube: SS-C/CU 3-high vacuum tubes
Heat preservation: 72 hours
Hail resistance: 25mm
Insulation: polyurethane/rock wool
Optimal installation angle: vertical: 30 to 70 degrees
Pressure drop: 7bar, 3.3L/minute for 20 tube manifold
Optimal flow rate: 0.1L/minute/tube or 0.026G/minute/tube
Heat pipe: anti-freezing less than -35 degrees
Glass tube dimensions: 58mm x 1.8m
Applications:
Domestic, industrial and commercial heating use
Suitable for open or closed (glycol-water)
Space heating
Caravan parks, hotels, schools, public showers/kitchens and restaurants
For large scale water heating
Learn more about products detailed description,pricing and service,Please send mail to us!
Pressurized Solar Collector
Pressurized Solar Collector,new design of support and more stronger than the old model.the cost price for selling.
Pressurized Solar Collector
Specifications:
Manifold:
Interior: red copper with 1.2mm thickness
Exterior: aluminum alloy with 1.8mm thickness
Maximum pressure: 12bar
Coating of vacuum tube: SS-C/CU 3-high vacuum tubes
Heat preservation: 72 hours
Hail resistance: 25mm
Insulation: polyurethane/rock wool
Optimal installation angle: vertical: 30 to 70 degrees
Pressure drop: 7bar, 3.3L/minute for 20 tube manifold
Optimal flow rate: 0.1L/minute/tube or 0.026G/minute/tube
Heat pipe: anti-freezing less than -35 degrees
Glass tube dimensions: 58mm x 1.8m
Applications:
Domestic, industrial and commercial heating use
Suitable for open or closed (glycol-water)
Space heating
Caravan parks, hotels, schools, public showers/kitchens and restaurants
For large scale water heating
Learn more about products detailed description,pricing and service.Please send mail to us!
Pressurized Solar Collector
Specifications:
Manifold:
Interior: red copper with 1.2mm thickness
Exterior: aluminum alloy with 1.8mm thickness
Maximum pressure: 12bar
Coating of vacuum tube: SS-C/CU 3-high vacuum tubes
Heat preservation: 72 hours
Hail resistance: 25mm
Insulation: polyurethane/rock wool
Optimal installation angle: vertical: 30 to 70 degrees
Pressure drop: 7bar, 3.3L/minute for 20 tube manifold
Optimal flow rate: 0.1L/minute/tube or 0.026G/minute/tube
Heat pipe: anti-freezing less than -35 degrees
Glass tube dimensions: 58mm x 1.8m
Applications:
Domestic, industrial and commercial heating use
Suitable for open or closed (glycol-water)
Space heating
Caravan parks, hotels, schools, public showers/kitchens and restaurants
For large scale water heating
Learn more about products detailed description,pricing and service.Please send mail to us!
Pressurized Solar Collector
aluminum outer tank
SUS304-2B food class inner tank
rock wool insulation
excellent 70 heat pipe
¢70*1800*15
¢70*1800*20
Absorbing area
1.65m
2
2.2m
2
Aperture area
2.5m
2
3.3m
2
Specification
1950*1380*120
1950*1830*120
Material of tube
borosilicate glass
borosilicate glass
Diameter of tube
70mm
70mm
Wall thickness of tube
2.0mm
2.0mm
Vacuum degree
<10
-5m
bar
<10
-5m
bar
Material of abosorber
copper
copper
Material of coating
selective abosorption coating
selective abosorption coating
Absorptivity
>95%
>95%
Emissivity
<5%
<5%
Angel
15-90
15-90
Test pressure
10 bar
10 bar
Work pressure
6 bar
6 bar
Max air drying
tem of collector
200
0
C
200
0
C
Max air drying
tem of tube
260
0
C
260
0
C
SUS304-2B food class inner tank
rock wool insulation
excellent 70 heat pipe
¢70*1800*15
¢70*1800*20
Absorbing area
1.65m
2
2.2m
2
Aperture area
2.5m
2
3.3m
2
Specification
1950*1380*120
1950*1830*120
Material of tube
borosilicate glass
borosilicate glass
Diameter of tube
70mm
70mm
Wall thickness of tube
2.0mm
2.0mm
Vacuum degree
<10
-5m
bar
<10
-5m
bar
Material of abosorber
copper
copper
Material of coating
selective abosorption coating
selective abosorption coating
Absorptivity
>95%
>95%
Emissivity
<5%
<5%
Angel
15-90
15-90
Test pressure
10 bar
10 bar
Work pressure
6 bar
6 bar
Max air drying
tem of collector
200
0
C
200
0
C
Max air drying
tem of tube
260
0
C
260
0
C
Pressurized Solar Thermal Collector
Solar thermal collector use Red Copper Sputtering Coating
Solar thermal collector Integrate frame with highabsorption efficient
The
Characteristics of
Pressurized Solar Thermal Collector
:
1)Solat thermal collectors integrated frame with high absorption efficiency.
2)Red copper Sputtering coating used is more sturdy and durable;
3)The high-effect seismic resistance and corrosion resistance;
4) The flat-plate solar thermal collector can be permeated completely by the sunlight,
high efficiency and good heat conductivity
Technical Parameters for Absorber of Solar Thermal Collector:
Dimension LxW (mm)
1886x956
Material
Red Copper
Surface treatment
Sputtering coating
Construction type
Fin and tube,ultrasonic welding
Header material
Copper T2
Header tube size (mm)
Ø25x1060x0.6 2 pcs
Riser material
Copper T2
Riser tube size (mm)
Ø10x1886x0.5 8pcs
Solar thermal collector Integrate frame with highabsorption efficient
The
Characteristics of
Pressurized Solar Thermal Collector
:
1)Solat thermal collectors integrated frame with high absorption efficiency.
2)Red copper Sputtering coating used is more sturdy and durable;
3)The high-effect seismic resistance and corrosion resistance;
4) The flat-plate solar thermal collector can be permeated completely by the sunlight,
high efficiency and good heat conductivity
Technical Parameters for Absorber of Solar Thermal Collector:
Dimension LxW (mm)
1886x956
Material
Red Copper
Surface treatment
Sputtering coating
Construction type
Fin and tube,ultrasonic welding
Header material
Copper T2
Header tube size (mm)
Ø25x1060x0.6 2 pcs
Riser material
Copper T2
Riser tube size (mm)
Ø10x1886x0.5 8pcs
Pressurized Solar Thermal Collector
Pressurized Solar Thermal Collector
Competitive price and good quality
Certification: CE, Keymark
5-15 years warranty
Pressurized solar thermal collector specification
1. Manifold (interior): 0.8mm thickness Red copper
2. Manifold (exterior): 2.0mm thickness Aluminum alloy
3. Glass tube dimensions: 58mm x 1.800mm / 47mm x 1.500mm
4. Insulation layer: 45mm thickness glass firber /polyurethane layer
5. Heat preservation: 72-96hrs
6. Hail resistance: 25mm
7. Max pressure: 12 bar
8. Coating of vacuum tube: Ss-c/cu
9. Frame: 2.0mm thickness Aluminum Alloy
Pressurized solar thermal collector applications:
1. Hotels, resorts, hospitals and hostels
2. Process industry, boiler feed, laundry and canteens
3. Agricultural sector, hatcheries and dairies
4. Process industry, Boiler feed, Laundry and canteens
5. Agricultural sector, hatcheries, and dairies
6. Swimming pool heating
7. In-process heating
8. Health clubs (Steam / Sauna)
Technical Data of solar energy water heater collector
Description
Solar energy water heater collector
Numbers of tube(pcs)
20
Absorber area approx. (m2)
2.6M2
Hydraulic Connections
G3/4" male thread
Fluid volume(L)
1.5
Maximum operation pressure(Bar)
12
Test pressure(Bar)
9
Heat transfer fluid
Anti-freeze Fluid (Water-Glycol)
Max. working temp.
250C
hot water(L/Day)
140-200L
Δ T
35C(Radiation> =800w/m2. day)
Collector efficiency
76.4%
Medium
Pure water
Start-up Temperature of heat pipe
< =30C
warranty
5 years
Pressurized solar thermal collector material specification
Flow type
Heat pipe
Heat pipe material
T2 copper
Heat pipe size
Top: Ø 20* 1mm; Body: Ø 8* 0.7mm
Tube diameter
φ 47/1500mm or φ 58/1800mm
Solar vaccum glass tube
High boron-silicon
Coating of absorber on glass tube
Al-N-Al, Copper, Stainless steel
fins around heat pipe
single long Aluminum(1.68m)
Manifold pipe material
TP2 copper (Ø 35x0.8mm)
Manifold casing material
Aluminum alloy (2.0mm)
Insulation material in manifold casing
Glass fiber
Thickness of insulation(mm)
45
Density of insulation (kg/m3)
90
Frame material
Aluminum alloy frame (2.0mm)
Sealing Materials
EPDM
Competitive price and good quality
Certification: CE, Keymark
5-15 years warranty
Pressurized solar thermal collector specification
1. Manifold (interior): 0.8mm thickness Red copper
2. Manifold (exterior): 2.0mm thickness Aluminum alloy
3. Glass tube dimensions: 58mm x 1.800mm / 47mm x 1.500mm
4. Insulation layer: 45mm thickness glass firber /polyurethane layer
5. Heat preservation: 72-96hrs
6. Hail resistance: 25mm
7. Max pressure: 12 bar
8. Coating of vacuum tube: Ss-c/cu
9. Frame: 2.0mm thickness Aluminum Alloy
Pressurized solar thermal collector applications:
1. Hotels, resorts, hospitals and hostels
2. Process industry, boiler feed, laundry and canteens
3. Agricultural sector, hatcheries and dairies
4. Process industry, Boiler feed, Laundry and canteens
5. Agricultural sector, hatcheries, and dairies
6. Swimming pool heating
7. In-process heating
8. Health clubs (Steam / Sauna)
Technical Data of solar energy water heater collector
Description
Solar energy water heater collector
Numbers of tube(pcs)
20
Absorber area approx. (m2)
2.6M2
Hydraulic Connections
G3/4" male thread
Fluid volume(L)
1.5
Maximum operation pressure(Bar)
12
Test pressure(Bar)
9
Heat transfer fluid
Anti-freeze Fluid (Water-Glycol)
Max. working temp.
250C
hot water(L/Day)
140-200L
Δ T
35C(Radiation> =800w/m2. day)
Collector efficiency
76.4%
Medium
Pure water
Start-up Temperature of heat pipe
< =30C
warranty
5 years
Pressurized solar thermal collector material specification
Flow type
Heat pipe
Heat pipe material
T2 copper
Heat pipe size
Top: Ø 20* 1mm; Body: Ø 8* 0.7mm
Tube diameter
φ 47/1500mm or φ 58/1800mm
Solar vaccum glass tube
High boron-silicon
Coating of absorber on glass tube
Al-N-Al, Copper, Stainless steel
fins around heat pipe
single long Aluminum(1.68m)
Manifold pipe material
TP2 copper (Ø 35x0.8mm)
Manifold casing material
Aluminum alloy (2.0mm)
Insulation material in manifold casing
Glass fiber
Thickness of insulation(mm)
45
Density of insulation (kg/m3)
90
Frame material
Aluminum alloy frame (2.0mm)
Sealing Materials
EPDM
Pressurized Solar collector (58x1800x30 tubes)
solar collector
1.CE/ISO/SGS/CCC cetificate
2.20 years or more life performance
3. Work well on -35 Celsius degree
Solar collector (YJL-SC-A2)
solar collector Manifold (interior): Thickness 0.80mm or 1.00 mm Copper
Manifold Casing Material: 1.8mm thickness /Aluminum
Insulation: Rock wool /Polyurethane
Frame Material: Thickness 1.80 mm Aluminum alloy
Glass tube dimensions: 58mm×1.8m
No.of vacuum tube: 12-30 PCS for one collector
Daily efficiency: ≥55% , ≥45% in winter.
Coating of vacuum tube: CU-SS-ALN/AIN
Heat pipe: anti-freezing > -35 centigrade.
Optimal installation angle 30-70°Vertical, 0°Horizontal
Operating Pressure 6bar
Test pressure:10bar
1.CE/ISO/SGS/CCC cetificate
2.20 years or more life performance
3. Work well on -35 Celsius degree
Solar collector (YJL-SC-A2)
solar collector Manifold (interior): Thickness 0.80mm or 1.00 mm Copper
Manifold Casing Material: 1.8mm thickness /Aluminum
Insulation: Rock wool /Polyurethane
Frame Material: Thickness 1.80 mm Aluminum alloy
Glass tube dimensions: 58mm×1.8m
No.of vacuum tube: 12-30 PCS for one collector
Daily efficiency: ≥55% , ≥45% in winter.
Coating of vacuum tube: CU-SS-ALN/AIN
Heat pipe: anti-freezing > -35 centigrade.
Optimal installation angle 30-70°Vertical, 0°Horizontal
Operating Pressure 6bar
Test pressure:10bar
Pressurized Thermal Solar Collector with Heat Pipe
1.SRCC,Solar Keymark.SGS,
2.100000Btu/day based on 1000watt/M2
3.15 years warantee for vacuum tube
4.Leading Manufacture
Solar collector,pressurized solar collector,soalr hotwater collector.
Solar collector specification:
1. Manifold (interior): 0.8mm thickness Red copper
2. Manifold (exterior): 2. Mm thickness Aluminum alloy
3. Glass tube dimensions: 58mm x 1.800mm / 47mm x 1.500mm
4. Tube no: 10/12/15/18/20/22/24/25/28/30tube
5. Insulation layer: 35mm thickness glass firber /polyurethane layer
6. Heat preservation: 72 hrs
7. Hail resistance: 25mm
8. Max pressure: 6 bar
9. Coating of vacuum tube: Ss-c/cu
10. Frame: 2.0mm thickness Aluminum Alloy
Technical Data of Heat pipe collector
Production Model
FD-58
FD-58
Numbers of tube(pcs)
30
20
Absorber area approx.(m2)
2.439
1.626
Gross size(m)
1.99*2.1*0.154
1.99*1.4*0.154
Weight Empty(kg)
93.5
63
Hydraulic Connections
G3/4" male thread
Loading qty in 20 GP/40GP/40HQ
63/130/145
90/185/210
Fluid volume(L)
1.7
1.2
Min. volume flowrate per collector(L/H)
108
72
Rated volume flowrate per coll.(L/H)
180
120
Max. volume flowrate per collector(L/H)
1200
1200
Maximum operation pressure(Bar)
6
Test pressure(Bar)
9
Heat transfer fluid
Anti-freeze Fluid (Water-Glycol)
Max.working temp.
250C
hot water(L/Day)
240C
160
ΔT
35C(Radiation>=800w/m2.day)
Collector efficiency
76.4% 76.2%
Medium
Pure water
Start-up Temperature of heat pipe
<=30C
warranty
5 years
Mateial Details
Produciton Model
FD-58
Flow type
Heat pipe
Heat pipe material
T2 copper
Heat pipe size
Top: Ø14* 1mm; Body: Ø8* 0.7mm
Tube diameter
φ47/1500mm or φ58/1800mm
Solar vaccum glass tube
High boron-silicon
Coating of absorber on glass tube
Al-N-Al,Copper,Stainless steel
fins around heat pipe
single long Aluminum(1.68m)
Manifold pipe material
TP2 copper (Ø35x0.8mm)
Manifold casing material
6063 Aluminum alloy (2.0mm)
Insulation material in manifold caseing
Glass fiber
Thickness of insulation(mm)
45
Density of insulation (kg/m3)
90
Frame material
Aluminum alloy frame(2mm)
Frame and manifold casing finish
Black Powder coated
Sealing Materials
EPDM
2.100000Btu/day based on 1000watt/M2
3.15 years warantee for vacuum tube
4.Leading Manufacture
Solar collector,pressurized solar collector,soalr hotwater collector.
Solar collector specification:
1. Manifold (interior): 0.8mm thickness Red copper
2. Manifold (exterior): 2. Mm thickness Aluminum alloy
3. Glass tube dimensions: 58mm x 1.800mm / 47mm x 1.500mm
4. Tube no: 10/12/15/18/20/22/24/25/28/30tube
5. Insulation layer: 35mm thickness glass firber /polyurethane layer
6. Heat preservation: 72 hrs
7. Hail resistance: 25mm
8. Max pressure: 6 bar
9. Coating of vacuum tube: Ss-c/cu
10. Frame: 2.0mm thickness Aluminum Alloy
Technical Data of Heat pipe collector
Production Model
FD-58
FD-58
Numbers of tube(pcs)
30
20
Absorber area approx.(m2)
2.439
1.626
Gross size(m)
1.99*2.1*0.154
1.99*1.4*0.154
Weight Empty(kg)
93.5
63
Hydraulic Connections
G3/4" male thread
Loading qty in 20 GP/40GP/40HQ
63/130/145
90/185/210
Fluid volume(L)
1.7
1.2
Min. volume flowrate per collector(L/H)
108
72
Rated volume flowrate per coll.(L/H)
180
120
Max. volume flowrate per collector(L/H)
1200
1200
Maximum operation pressure(Bar)
6
Test pressure(Bar)
9
Heat transfer fluid
Anti-freeze Fluid (Water-Glycol)
Max.working temp.
250C
hot water(L/Day)
240C
160
ΔT
35C(Radiation>=800w/m2.day)
Collector efficiency
76.4% 76.2%
Medium
Pure water
Start-up Temperature of heat pipe
<=30C
warranty
5 years
Mateial Details
Produciton Model
FD-58
Flow type
Heat pipe
Heat pipe material
T2 copper
Heat pipe size
Top: Ø14* 1mm; Body: Ø8* 0.7mm
Tube diameter
φ47/1500mm or φ58/1800mm
Solar vaccum glass tube
High boron-silicon
Coating of absorber on glass tube
Al-N-Al,Copper,Stainless steel
fins around heat pipe
single long Aluminum(1.68m)
Manifold pipe material
TP2 copper (Ø35x0.8mm)
Manifold casing material
6063 Aluminum alloy (2.0mm)
Insulation material in manifold caseing
Glass fiber
Thickness of insulation(mm)
45
Density of insulation (kg/m3)
90
Frame material
Aluminum alloy frame(2mm)
Frame and manifold casing finish
Black Powder coated
Sealing Materials
EPDM
Pressurized Water Tank
Inner tank: SPCC+glaze+enamelcoating acid and alkali proof
Outer tank: color plate (luster white) elegant appearanc
Enamel inner tank does better in anti-corrosion. DRE adopts advanced welding, enameling and painting technology, perfectly solved the problem of easy scaling and easy corrosion.
Inner tank: SPCC+glaze+enamelcoating acid and alkali proof
Outer tank: color plate (luster white) elegant appearance
Insulation: Polyurethane foam overall foaming, longer holding time
Heat exchange: red copper coil
Capacity
Inner tank
Outer Tank
Heat Exchange
Area
Insulation
Copper coil
Length of
Copper Coil
100L
Spcc+Enamel 2.0mm
color steel(luster white)0.4mm
0.5m
2
polyurethane foam
50mm
1 copper coil,
Φ16,thickness:0.8mm
10
200L
Spcc+Enamel 2.0mm
color steel(luster white)0.4mm
0.7m
2
14
300L
Spcc+Enamel 2.5mm
color steel(luster white)0.4mm
0.7m
2
16
400L
Spcc+Enamel 3.0mm
color steel(luster white)0.4mm
0.8m
2
16
500L
Spcc+Enamel 3.0mm
color steel(luster white)0.4mm
0.8m
2
16
1 Timely water replenishment
2 Indirect heat transfer. Water will be heated inside red copper coil. Cleanness is ensured.
3 Solar-Electric complementary. Supplied with thermostat controller. Hot water available at any time.
4 Short heat transfer time, high efficiency.
Outer tank: color plate (luster white) elegant appearanc
Enamel inner tank does better in anti-corrosion. DRE adopts advanced welding, enameling and painting technology, perfectly solved the problem of easy scaling and easy corrosion.
Inner tank: SPCC+glaze+enamelcoating acid and alkali proof
Outer tank: color plate (luster white) elegant appearance
Insulation: Polyurethane foam overall foaming, longer holding time
Heat exchange: red copper coil
Capacity
Inner tank
Outer Tank
Heat Exchange
Area
Insulation
Copper coil
Length of
Copper Coil
100L
Spcc+Enamel 2.0mm
color steel(luster white)0.4mm
0.5m
2
polyurethane foam
50mm
1 copper coil,
Φ16,thickness:0.8mm
10
200L
Spcc+Enamel 2.0mm
color steel(luster white)0.4mm
0.7m
2
14
300L
Spcc+Enamel 2.5mm
color steel(luster white)0.4mm
0.7m
2
16
400L
Spcc+Enamel 3.0mm
color steel(luster white)0.4mm
0.8m
2
16
500L
Spcc+Enamel 3.0mm
color steel(luster white)0.4mm
0.8m
2
16
1 Timely water replenishment
2 Indirect heat transfer. Water will be heated inside red copper coil. Cleanness is ensured.
3 Solar-Electric complementary. Supplied with thermostat controller. Hot water available at any time.
4 Short heat transfer time, high efficiency.
Pressurized flat panel solar collector
We supply many kinds of flat panel solar collector with different fins and coating.
cFlat panel solar collector
1. Model No.: M8QT-Z
2. Product Size:2000mm*1000mm*80mm
3. Absorbing area:1.96m2
4. Weight: 31kgs
5. Certification: CE
6. Absorber material: 0.15mm Copper plate, Copper TP2 Φ10 tube , thickness: 0.5mm*8pcs
7. Absorber technics: Ultrasonic Welding
8. Test Pressure: 0.8mpa
9. Absorber coating: Black Chrome coating with 97 % ± 2% absorptivity and 14 % ± 2% emissivity.
10. Special Solar Low Carbon patterned Glass: Thickness:3.2mm; Conductivity:≥97%
11. Collector Insulation: materials:glass wool; Thickness:45 mm;Density:35 kg/m3;Criterion:6063T5 1.3 mm.
12. Frame material: Aluminum Alloy
13. Back plate material: 0.7mm whole aluminum plate
14. Input/output Connection: 3/4 inch Copper inner screw
15. Sealing material: Silica gel
16. Test Data:
Transient Efficiency:a1=3.82 W/m
2
·K a2=0.008 W/m
2
·K
Heat Loss Coefficient:75% ± 2%
Maximal Temperature:190 °C 950W/m
2
17. Working life:20 years
cFlat panel solar collector
1. Model No.: M8QT-Z
2. Product Size:2000mm*1000mm*80mm
3. Absorbing area:1.96m2
4. Weight: 31kgs
5. Certification: CE
6. Absorber material: 0.15mm Copper plate, Copper TP2 Φ10 tube , thickness: 0.5mm*8pcs
7. Absorber technics: Ultrasonic Welding
8. Test Pressure: 0.8mpa
9. Absorber coating: Black Chrome coating with 97 % ± 2% absorptivity and 14 % ± 2% emissivity.
10. Special Solar Low Carbon patterned Glass: Thickness:3.2mm; Conductivity:≥97%
11. Collector Insulation: materials:glass wool; Thickness:45 mm;Density:35 kg/m3;Criterion:6063T5 1.3 mm.
12. Frame material: Aluminum Alloy
13. Back plate material: 0.7mm whole aluminum plate
14. Input/output Connection: 3/4 inch Copper inner screw
15. Sealing material: Silica gel
16. Test Data:
Transient Efficiency:a1=3.82 W/m
2
·K a2=0.008 W/m
2
·K
Heat Loss Coefficient:75% ± 2%
Maximal Temperature:190 °C 950W/m
2
17. Working life:20 years
Pressurized heat pipe solar collector
Solar Collector
1.15years life
2.SRCC,Solar Keymark,ISO9001,ISO14001,CE
3.OEM service
4.Delivery time:7-15days MOQ:1set
Pressurized heat pipe solar collector
Working Principle:
The pressure pump connects the circulation system between the Solar Heat Absorption Collector and the Water Tank. When the temperature difference between them reaches the trigger point , the system automatically starts circulation and naturally provides the heating water.
Features:
Module Design with flexible system configuration. Easy installation and integration with exsiting building.
Intelligent control of the system operation with the system temperature monitoring.
Dual Anti-Freeze Protections with thermal media in the circulation pipe and anti-freeze circulation control.
Possible to integrate with current heating system(electric or gas based) to a hybrid system to provide water heating and floor heating system.
Go Green on Sunny Day. Take the full advantage of Mother Nature to enjoy free heating.
Specification:
System Includes: Pressurized Solar Collector , Water Tank, Work Station and Controller.
Operation Pressure: 0.6Mpa
Thermal Efficiency:≥55% in Summer, ≥45% in Winter
Thermal Loss: ≤4%
Assistant Electric Heating: 1.5---2KW
Anti-Freeze Temperature :-35°C
1.15years life
2.SRCC,Solar Keymark,ISO9001,ISO14001,CE
3.OEM service
4.Delivery time:7-15days MOQ:1set
Pressurized heat pipe solar collector
Working Principle:
The pressure pump connects the circulation system between the Solar Heat Absorption Collector and the Water Tank. When the temperature difference between them reaches the trigger point , the system automatically starts circulation and naturally provides the heating water.
Features:
Module Design with flexible system configuration. Easy installation and integration with exsiting building.
Intelligent control of the system operation with the system temperature monitoring.
Dual Anti-Freeze Protections with thermal media in the circulation pipe and anti-freeze circulation control.
Possible to integrate with current heating system(electric or gas based) to a hybrid system to provide water heating and floor heating system.
Go Green on Sunny Day. Take the full advantage of Mother Nature to enjoy free heating.
Specification:
System Includes: Pressurized Solar Collector , Water Tank, Work Station and Controller.
Operation Pressure: 0.6Mpa
Thermal Efficiency:≥55% in Summer, ≥45% in Winter
Thermal Loss: ≤4%
Assistant Electric Heating: 1.5---2KW
Anti-Freeze Temperature :-35°C
15W Round Solar Panel with 12V
1.Positive Tolerance
2.MOQ :10pcs
3.Beautiful looking Solar Panel
4.Art Solar panel
Peak Power
15W
Open Circuit Voltage
20.3V
Short Circuit Current
0.98A
Optimum Operating Voltage
16.9V
Optimum operating current
0.89A
This Round Solar Panel are used in Solar Garden Light and Solar Lights in High way.Also other use.
5 years product warranty
10 years of 90% power output
25 years of 80% power output
2.MOQ :10pcs
3.Beautiful looking Solar Panel
4.Art Solar panel
Peak Power
15W
Open Circuit Voltage
20.3V
Short Circuit Current
0.98A
Optimum Operating Voltage
16.9V
Optimum operating current
0.89A
This Round Solar Panel are used in Solar Garden Light and Solar Lights in High way.Also other use.
5 years product warranty
10 years of 90% power output
25 years of 80% power output
Pressurized heat pipe solar collector
Heat pipe solar collector
1.CE,SK & SRCC owner
2.OEM service suppiled
3.High pressure collector with heat pipe tubes
Detailed Product Description
SPlit solar collector
pressuried solar collector
Heat pipe solar collector
solar collector with CE & SK
Features:
1)Reliable & efficient twin-glass solar tube
2)Copper heat pipes for rapid heat transfer
3)Easy plug-in installation
4)Free maintenance
5)Suitable for mains pressure water(up to 1.0bar)
6)Corrosion resistance silver brazed copper header
7)Aluminum frame
8)Powder coated (black white brown or silver) aluminum casing
9)Stable solar conversion during the day
10)The perfect solar collector for domestic solar water heater systems
11)Ideal for commercial solar water heating applications
Work principle
1)the operation of the solar collector is very simple
2)Solar absorption: solar radiation is absorbed by the solar tube & converted into heat
3)Solar heater transfer: heat pipes conduct the heat from within the solar tube up to the header pipe
4)Solar energy storage: water is circulated through the header, via intermittent pump cycling. Each time the water circulates through the header, the temperature is raised by 5-10 centigarde. Throughout the day,the water in the tank is gradually heated
Technical Specification
Manifold Casing material: Aluminum
Frame material: Aluminum
Header Pipe material: copper
Heat pipe material: copper
Insulation: Rock wool
Rubber seals & rings UV Stabilized high temperature silicon rubber
Collector Mounting flat roof/inclined roof
Mounting angle:15-50 degree
Inlet:3/4
Packing:
1)Standard export packing for full container quantity
2)Special packing for sample orders
Contact Us
Any question please feel free to contact us!
1.CE,SK & SRCC owner
2.OEM service suppiled
3.High pressure collector with heat pipe tubes
Detailed Product Description
SPlit solar collector
pressuried solar collector
Heat pipe solar collector
solar collector with CE & SK
Features:
1)Reliable & efficient twin-glass solar tube
2)Copper heat pipes for rapid heat transfer
3)Easy plug-in installation
4)Free maintenance
5)Suitable for mains pressure water(up to 1.0bar)
6)Corrosion resistance silver brazed copper header
7)Aluminum frame
8)Powder coated (black white brown or silver) aluminum casing
9)Stable solar conversion during the day
10)The perfect solar collector for domestic solar water heater systems
11)Ideal for commercial solar water heating applications
Work principle
1)the operation of the solar collector is very simple
2)Solar absorption: solar radiation is absorbed by the solar tube & converted into heat
3)Solar heater transfer: heat pipes conduct the heat from within the solar tube up to the header pipe
4)Solar energy storage: water is circulated through the header, via intermittent pump cycling. Each time the water circulates through the header, the temperature is raised by 5-10 centigarde. Throughout the day,the water in the tank is gradually heated
Technical Specification
Manifold Casing material: Aluminum
Frame material: Aluminum
Header Pipe material: copper
Heat pipe material: copper
Insulation: Rock wool
Rubber seals & rings UV Stabilized high temperature silicon rubber
Collector Mounting flat roof/inclined roof
Mounting angle:15-50 degree
Inlet:3/4
Packing:
1)Standard export packing for full container quantity
2)Special packing for sample orders
Contact Us
Any question please feel free to contact us!
Pressurized heat pipe split solar water heater system max. 500L
Pressurized solar water heater
1.split system
2.good quality and competitive price
3.high efficiency
4.max capacity 500L
Pressurized heat pipe split solar water heater system max. 500L
We are a professional enamel hot water tank / solar water heater manufacturer with ISO and CE certificate in Changzhou, China.
1. Reliable and efficient twin-glass solar tubes
2. Copper heat pipes for rapid heat transfer
3. Easy plug-in installation
4. Free maintenance
5. Suitable for mains pressure water (up to 8 bar/116psi)
6. Corrosion resistant silver brazed copper header
7. Powder coated (black or silver) aluminum casing
8. Stable solar conversion throughout the day (tubes passively track the sun)
9. The perfect solar collector for domestic solar water heater systems
10. Ideal for commercial solar water heating applications
Solar collectors
Item
Model
No. of
Heat pipe
Dia. & Len.
(mm) of Heat pipe
Hot water output (L)
Aperture area (m2)
Working pressure
(bar)
CC-58-1800-10
10
58-1800
80
1.00
6
CC-58-1800-12
12
58-1800
100
1.20
6
CC-58-1800-15
15
58-1800
125
1.50
6
CC-58-1800-18
18
58-1800
145
1.81
6
CC-58-1800-20
20
58-1800
160
2.01
6
CC-58-1800-24
24
58-1800
200
2.41
6
CC-58-1800-30
30
58-1800
250
3.01
6
1.split system
2.good quality and competitive price
3.high efficiency
4.max capacity 500L
Pressurized heat pipe split solar water heater system max. 500L
We are a professional enamel hot water tank / solar water heater manufacturer with ISO and CE certificate in Changzhou, China.
1. Reliable and efficient twin-glass solar tubes
2. Copper heat pipes for rapid heat transfer
3. Easy plug-in installation
4. Free maintenance
5. Suitable for mains pressure water (up to 8 bar/116psi)
6. Corrosion resistant silver brazed copper header
7. Powder coated (black or silver) aluminum casing
8. Stable solar conversion throughout the day (tubes passively track the sun)
9. The perfect solar collector for domestic solar water heater systems
10. Ideal for commercial solar water heating applications
Solar collectors
Item
Model
No. of
Heat pipe
Dia. & Len.
(mm) of Heat pipe
Hot water output (L)
Aperture area (m2)
Working pressure
(bar)
CC-58-1800-10
10
58-1800
80
1.00
6
CC-58-1800-12
12
58-1800
100
1.20
6
CC-58-1800-15
15
58-1800
125
1.50
6
CC-58-1800-18
18
58-1800
145
1.81
6
CC-58-1800-20
20
58-1800
160
2.01
6
CC-58-1800-24
24
58-1800
200
2.41
6
CC-58-1800-30
30
58-1800
250
3.01
6
Pressurized solar collector module
PRESSURIZED SOLAR COLLECTOR MODULE
This type can operate even in case of a broken tube. A single tube can be exchanged without
PRESSURIZED SOLAR COLLECTOR MODULE
Characteristics
This type can operate even in case of a broken tube. A single tube can be exchanged without interruption of the heating cycle. There is no water in the vacuum tube, so the tube will not be easy to break in winter. The small size of the collector allows for versatile architectonic integration, it can be combined with existing pipeline.
manifold frown adopts the red copper, each one can endure 1.0Mpa
outer of manifold: aluminum alloy, thickness: 1.5mm
frame: aluminum alloy, thickness: 2.0mm
vacuum tube with heat pipe inside and 4pcs of aluminum slices,
insulation layer: rock wool
This type can operate even in case of a broken tube. A single tube can be exchanged without
PRESSURIZED SOLAR COLLECTOR MODULE
Characteristics
This type can operate even in case of a broken tube. A single tube can be exchanged without interruption of the heating cycle. There is no water in the vacuum tube, so the tube will not be easy to break in winter. The small size of the collector allows for versatile architectonic integration, it can be combined with existing pipeline.
manifold frown adopts the red copper, each one can endure 1.0Mpa
outer of manifold: aluminum alloy, thickness: 1.5mm
frame: aluminum alloy, thickness: 2.0mm
vacuum tube with heat pipe inside and 4pcs of aluminum slices,
insulation layer: rock wool
Pressurized solar collector
Pressurized solar collector
1) food grade stainless steel
2) manifold : aluminum alloy
3) Glass tube: new trival
pressuried solar collector features
1. Temperature conservation layer in chest
2. Economical and practical
3. Environmental conservation and energy saving
4. According to the required configuration, it can be divided into two types, one is vertical and the other is horizontal
pressure solar collector applications
1. Hotels, resorts, hospitals and hostels
2. Process industry, boiler feed, laundry and canteens
3. Agricultural sector, hatcheries and dairies
4. Process industry, Boiler feed, Laundry and canteens
5. Agricultural sector, hatcheries, and dairies
6. Swimming pool heating
7. In-process heating
8. Health clubs (Steam / Sauna)
Solar collectors for water material specification
Descripition
pressurized solar collector
Material of out manifold
Aluminium Alloy
Material of inner tank
Copper Header Pipe
Inlet and outlet hole
Male G3/4
Max pressure
0.6 Mpa
Solar collector tube
3.3 Borosilicate glass with N/Al coating
Thickness of glass tube
1.6mm
Vacuum tube tightness
P≤0.005 Pa
Absorption
as=0.93-0.96(AM1.5)
Emission ratio
εh=0.04-0.06(80C±5C)
Idle sunning property parameters
Y=220~260m2.C/KW
Average heat loss coefficient
ULT=0.6~0.7W/(m2.C)
Bracket:
Aluminium Alloy/ Galvanized Steel
Welding:
Argon arc welding
Fastening pieces:
Made of stainless steel screw
Specification of vacuum tube
Item No.
Specification
Qty. of solar tubes
Diameter of solar tube
Length of solar tube
Absorber area
Dimension
SP125-1800/58-15
15pcs
Ø 58mm
1.8M
1.2
1060*2000
SP125-1800/58-20
20pcs
Ø 58mm
1.8M
1.6
1410*2000
SP125-1800/58-30
30pcs
Ø 58mm
1.8M
2.4
2110*2000
1) food grade stainless steel
2) manifold : aluminum alloy
3) Glass tube: new trival
pressuried solar collector features
1. Temperature conservation layer in chest
2. Economical and practical
3. Environmental conservation and energy saving
4. According to the required configuration, it can be divided into two types, one is vertical and the other is horizontal
pressure solar collector applications
1. Hotels, resorts, hospitals and hostels
2. Process industry, boiler feed, laundry and canteens
3. Agricultural sector, hatcheries and dairies
4. Process industry, Boiler feed, Laundry and canteens
5. Agricultural sector, hatcheries, and dairies
6. Swimming pool heating
7. In-process heating
8. Health clubs (Steam / Sauna)
Solar collectors for water material specification
Descripition
pressurized solar collector
Material of out manifold
Aluminium Alloy
Material of inner tank
Copper Header Pipe
Inlet and outlet hole
Male G3/4
Max pressure
0.6 Mpa
Solar collector tube
3.3 Borosilicate glass with N/Al coating
Thickness of glass tube
1.6mm
Vacuum tube tightness
P≤0.005 Pa
Absorption
as=0.93-0.96(AM1.5)
Emission ratio
εh=0.04-0.06(80C±5C)
Idle sunning property parameters
Y=220~260m2.C/KW
Average heat loss coefficient
ULT=0.6~0.7W/(m2.C)
Bracket:
Aluminium Alloy/ Galvanized Steel
Welding:
Argon arc welding
Fastening pieces:
Made of stainless steel screw
Specification of vacuum tube
Item No.
Specification
Qty. of solar tubes
Diameter of solar tube
Length of solar tube
Absorber area
Dimension
SP125-1800/58-15
15pcs
Ø 58mm
1.8M
1.2
1060*2000
SP125-1800/58-20
20pcs
Ø 58mm
1.8M
1.6
1410*2000
SP125-1800/58-30
30pcs
Ø 58mm
1.8M
2.4
2110*2000
Pressurized solar flat panel collector
Pressurized solar flat panel collector;
Laser wholly welded;
Pure copper plate core with imported blue titanium coating;
Pressurized solar flat panel collector
Parameter:
1.Contour dimension: 2000x1000x80 mm
2.Absorber area: 1.96 square meter
3.Weight: 39kg
4.Manufacture standard: GB/T6424, EN12975, EN12976
5.Certifications gained: CE, CTS
6.Collector plate core: Material in 0.15mm copper fin,Φ8mm TP2 Brass
thickness 0.75mm. Techniques in laser wholly welding
7.Test pressure: 0.8Mpa
8.Coating: German blue titanium
9.Absorptivity: 95%±2%
10.Emissivity: 4%±2%
11.Toughened glass: thickness 3.2mm, conductivity ≥97%
12.Insulation layer: material in glass wool/PU, thickness in 45mm and
density in 35kg/m³, Criterion in 6063T5 1.3mm
13.Border material: Aluminum alloy
14.Bottom plate material: 0.8mm galvanized steel
15.Connecting point: 1/2” inside copper wire
16.Sealing gasket material: silica gel
17.Transient efficiency : 78%±2%
18.Maximal temperature: 190°C 900W/sm
19.Packing: in cartons
20.Service life: 25 years
Laser wholly welded;
Pure copper plate core with imported blue titanium coating;
Pressurized solar flat panel collector
Parameter:
1.Contour dimension: 2000x1000x80 mm
2.Absorber area: 1.96 square meter
3.Weight: 39kg
4.Manufacture standard: GB/T6424, EN12975, EN12976
5.Certifications gained: CE, CTS
6.Collector plate core: Material in 0.15mm copper fin,Φ8mm TP2 Brass
thickness 0.75mm. Techniques in laser wholly welding
7.Test pressure: 0.8Mpa
8.Coating: German blue titanium
9.Absorptivity: 95%±2%
10.Emissivity: 4%±2%
11.Toughened glass: thickness 3.2mm, conductivity ≥97%
12.Insulation layer: material in glass wool/PU, thickness in 45mm and
density in 35kg/m³, Criterion in 6063T5 1.3mm
13.Border material: Aluminum alloy
14.Bottom plate material: 0.8mm galvanized steel
15.Connecting point: 1/2” inside copper wire
16.Sealing gasket material: silica gel
17.Transient efficiency : 78%±2%
18.Maximal temperature: 190°C 900W/sm
19.Packing: in cartons
20.Service life: 25 years
Pretty Energy-saving Compact Solar Water collector for engineering
Solar collector
1. Certificate:CE,ISO,CCC,SGS,Solar keymark,SRCC
2.. OEM provide
3. Samples offer
4.Delivery time:7-15 days
Energy-efficient Solar collector
Solar water heater chemical position:
Inner tank: Stainless steel SUS304 2B
Thickness: 0.6mm
Cr: 17.00-19.00 %
Ni: 8.00-10.00 %
* Outer tank: Aluminum zinc steel(SUS304 2B)
Thickness 0.6mm
* Insulating layer: Foaming polyurethane
Thickness 55mm
Solar water heater transfer theory.
Thermal transfer rate 0.022W/m. K
Sealing rubber: Silicon rubber
Dustproof rubber EPDM
Highly efficient all glass vacuum tube :10/15/18/20/24/30/36/40/50
Energy-saving Compact Solar Water Heater
Sannneng China's well-known trademark!
if you want to know more ,please cotact me !
1. Certificate:CE,ISO,CCC,SGS,Solar keymark,SRCC
2.. OEM provide
3. Samples offer
4.Delivery time:7-15 days
Energy-efficient Solar collector
Solar water heater chemical position:
Inner tank: Stainless steel SUS304 2B
Thickness: 0.6mm
Cr: 17.00-19.00 %
Ni: 8.00-10.00 %
* Outer tank: Aluminum zinc steel(SUS304 2B)
Thickness 0.6mm
* Insulating layer: Foaming polyurethane
Thickness 55mm
Solar water heater transfer theory.
Thermal transfer rate 0.022W/m. K
Sealing rubber: Silicon rubber
Dustproof rubber EPDM
Highly efficient all glass vacuum tube :10/15/18/20/24/30/36/40/50
Energy-saving Compact Solar Water Heater
Sannneng China's well-known trademark!
if you want to know more ,please cotact me !
Pretty Energy-saving solar thermal collector with 500 L Tank
Solar heater 1.solar keymark EN12975 and SRCC ,
2. can be installed in series.
3. 6 years warranty
4. 15 days delivery
water heater
Solar Collctor Modual:
Solar Energy Water Heater/ Heat Pipe Solar Collector
EN12975 Tested with the solar keymark. Popular for its efficiency and Reasonable Price.
Solar Energy Water Heater With HEAT PIPE SOLAR COLLECTOR FEATURE:
Pressurized solar collector with EN12975 and solar keymark certificate.
Special high quality Insulated material to reducing the heat loss rate.
High Quality heat pipe for efficient heat Transferring and long life span of the solar water heater
Exquisite workmanship to guarantee the decent appearance.
Solar keymark EN12975 certificate, CCC, CE, ISO , SRCC (in progress)
Long life Span and no extra cost after installatio
Can be connected with the existing oil heater or gas heater
Easy Installation
Solar Energy water heater / Heat pipe solar collector Specification:
The water is heated by the heat pipe quickly.
there is no water in the vaccum tube, so the tube will not break in the winter.
It can be combined with the architecture perfectly.
It can be combined with the exsiting pipeline.
It will be affected by the local water quality, it doesn’t suit hard water .
It can be still operation in the event of occasional tube breakages.
Features:
(1 ) The pipeline and heat exchange use TU1 copper .Thermal anti-freeze media is used in the inner tube to Vacuum Tube . No water flow into Vatuum Tube . The manifold made of Aluminum Alloy to strength its structure . There is ventilation tunnel to maintain the system pressure level.
(2). The system can withstand the pressure as high as 0.7 Mpa at operation.
(3). The modular design of the system provides a flexible configuration to meet varity needs from customers.
Specifications:
Manifold:
Interior---Copper
Exterior: Alluminum Alloy
Frame: Alluminum Alloy
Tube Coating: ALN/ALN-SS/AL with heat pipe
Tube Dimension : 58mm X 1800mm / 47mm X 1500mm/ 58mm X 2100mm
Number of tubes: 10, 12, 15, 18, 20, 24, 30, 35 and 40 pieces
Daily Efficiency :≥55%, ≥45% in winter
Operating Pressure : 6 Bar
Anti-Freeze:-35
Hail Resistance: 25mm
HCM-01 Technical Data
Model Name
Tube Specification
Coating
Absorber Area
Daily Output(50)
Max Pressure
HCM12-58/1800
58mm*1800mm*12
Heat
Pipe
1.55 M2
85-120L
12 Bar
HCM15-58/1800
58mm*1800mm*15
1.95M2
105-150L
12 Bar
HCM20-58/1800
58mm*1800mm*20
2.60M2
140-200L
12 Bar
HCM15-47/1500
47mm*1500mm*15
1.37M2
60-85L
12 Bar
HCM20-47/1500
47mm*1500mm*20
1.84M2
90-110L
12 Bar
HCM30-58/850
58mm*850mm*30
1.75M2
80-120L
12 Bar
HCM35-58/850
58mm*850mm*35
2.03M2
120-150L
12 Bar
HCM20-58/2100
58mm*2100mm*20
2.98 M2
160-240L
12 Bar
HCM30-58/2100
58mm*2100mm*30
4.50M2
220-300L
12 Bar
2. can be installed in series.
3. 6 years warranty
4. 15 days delivery
water heater
Solar Collctor Modual:
Solar Energy Water Heater/ Heat Pipe Solar Collector
EN12975 Tested with the solar keymark. Popular for its efficiency and Reasonable Price.
Solar Energy Water Heater With HEAT PIPE SOLAR COLLECTOR FEATURE:
Pressurized solar collector with EN12975 and solar keymark certificate.
Special high quality Insulated material to reducing the heat loss rate.
High Quality heat pipe for efficient heat Transferring and long life span of the solar water heater
Exquisite workmanship to guarantee the decent appearance.
Solar keymark EN12975 certificate, CCC, CE, ISO , SRCC (in progress)
Long life Span and no extra cost after installatio
Can be connected with the existing oil heater or gas heater
Easy Installation
Solar Energy water heater / Heat pipe solar collector Specification:
The water is heated by the heat pipe quickly.
there is no water in the vaccum tube, so the tube will not break in the winter.
It can be combined with the architecture perfectly.
It can be combined with the exsiting pipeline.
It will be affected by the local water quality, it doesn’t suit hard water .
It can be still operation in the event of occasional tube breakages.
Features:
(1 ) The pipeline and heat exchange use TU1 copper .Thermal anti-freeze media is used in the inner tube to Vacuum Tube . No water flow into Vatuum Tube . The manifold made of Aluminum Alloy to strength its structure . There is ventilation tunnel to maintain the system pressure level.
(2). The system can withstand the pressure as high as 0.7 Mpa at operation.
(3). The modular design of the system provides a flexible configuration to meet varity needs from customers.
Specifications:
Manifold:
Interior---Copper
Exterior: Alluminum Alloy
Frame: Alluminum Alloy
Tube Coating: ALN/ALN-SS/AL with heat pipe
Tube Dimension : 58mm X 1800mm / 47mm X 1500mm/ 58mm X 2100mm
Number of tubes: 10, 12, 15, 18, 20, 24, 30, 35 and 40 pieces
Daily Efficiency :≥55%, ≥45% in winter
Operating Pressure : 6 Bar
Anti-Freeze:-35
Hail Resistance: 25mm
HCM-01 Technical Data
Model Name
Tube Specification
Coating
Absorber Area
Daily Output(50)
Max Pressure
HCM12-58/1800
58mm*1800mm*12
Heat
Pipe
1.55 M2
85-120L
12 Bar
HCM15-58/1800
58mm*1800mm*15
1.95M2
105-150L
12 Bar
HCM20-58/1800
58mm*1800mm*20
2.60M2
140-200L
12 Bar
HCM15-47/1500
47mm*1500mm*15
1.37M2
60-85L
12 Bar
HCM20-47/1500
47mm*1500mm*20
1.84M2
90-110L
12 Bar
HCM30-58/850
58mm*850mm*30
1.75M2
80-120L
12 Bar
HCM35-58/850
58mm*850mm*35
2.03M2
120-150L
12 Bar
HCM20-58/2100
58mm*2100mm*20
2.98 M2
160-240L
12 Bar
HCM30-58/2100
58mm*2100mm*30
4.50M2
220-300L
12 Bar
Project Solar Water Heating System for Swimming Pool
Configurable non-pressurized Solar Heat Collectors to meet variety needs. It mostly used in the hotel and swimming pool heating.
Solar Water Heating System
features:
Configurable non-pressurized Solar Heat Collectors to meet variety needs from customers.
Widely used for residential building, commercial facility such as industrial and public facilities.
Capable to maintain automatic water supply, constant temperature control, over heat protection and assistant electric heating, etc.
Economic investment with high usability and efficiency.
No contamination, no pollution with safety and sanitation
Specifications:
Water Tank Materials:Interior-SUS304-2B Stainless Steel. Exterior - Galvanized steel
Thermal Vacuum Collecting Tube Size:58mm *1800mm.
Thermal Efficiency:≥52%
Thermal Loss:<4%.
Anti - Freeze:-5°C
Hail Resistance:25mm.
Life Time:15 Years.
Solar Water Heating System
features:
Configurable non-pressurized Solar Heat Collectors to meet variety needs from customers.
Widely used for residential building, commercial facility such as industrial and public facilities.
Capable to maintain automatic water supply, constant temperature control, over heat protection and assistant electric heating, etc.
Economic investment with high usability and efficiency.
No contamination, no pollution with safety and sanitation
Specifications:
Water Tank Materials:Interior-SUS304-2B Stainless Steel. Exterior - Galvanized steel
Thermal Vacuum Collecting Tube Size:58mm *1800mm.
Thermal Efficiency:≥52%
Thermal Loss:<4%.
Anti - Freeze:-5°C
Hail Resistance:25mm.
Life Time:15 Years.
Project Vacuum Solar Collector 50tubes
Vacuum Solar Collector
1)SPF, EN12975, Solar Keymark
2)High efficiency
3)Pressure system
4)Solar pool heat system
Vacuum Solar Collector
2. Vacuum Tubes:
1) Hail resistance: ≤25mm
2) Diameter of tube (mm): 47/58/65mm
3) Glass quality: Borosilicate glass 3.3
4) Thickness (mm): 1.6 or 2 mm
5) Vacuum degree (Pa): 3 x 10-3
6) Absorb rate: ≥0.94
7) Reflecting emission: <0.06
8) Material of coating: Al-N/Al
3. Jinyi Vacuum Solar Collector Features:
1) Suit for such large scale solar water heating solution as hotel, school, and public bath, etc.
2) The product successfully carries out the installation of separation according to Fabricating yard and is harmoniously blended with architecture.
3) It can supply plenty of hot water, and it is safer and more comfortable.
4) It can supply for several outlets at the same time, so it can fit for various requirement.
5) Flexible installation.
6) Beat rising energy cost and help the environment.
Place of Origin
China
Model Number
Model: JNCV
Price Terms
FOB, CIF
Brand Name
Jinyi & OEM
Payment Terms
T/T, L/C
Minimum Order
1 sets
Supply Ability
3,000 sets/month
Delivery Time
7 days
Mode
Area
Vacuum tube
Tube orientation
Loading Qty (set)
Dia.(mm)
Len(mm)
Qty(pcs)
20'
40'
40'H
JNCH-4715-50
4.56
47
1500
50
horizontal
72
150
170
JNCH-5818-50
6.4
58
1800
50
horizontal
65
138
150
Sample service
Sample FAQ:
1) May I get a sample?
Yes! As we know: no sample, no business! So we offer sample for your evaluation first.
2) What's the sample package?
Our normal package for full container is carton and foam;
Just to be on the safe side, we have to use the plywood pallet for protect it, arrival more safety.
3) What about the transportation?
We suggest by sea (LCL shipping).
On one hand, the vacuum tube is glass product, if through air express, the airport convey is imbrutementthe,
so the tube may be broken; On the other hand, the air express freight is huge.
4) What about the sample delivery time?
Normally, the sample delivery time is 7-12days.
Sample term
No. Item Description
1 Package Plywood pallet; the material is exempt from custom examination, you are no need to worry about it.
2 Delivery time For conventional products, the delivery time can be within 3 days; For unconventional products, the delivery time is 7-12 days.
3 Additional charge Plywood pallet + Inland transportation fee, based on the package size.
4 Sample payment 100% T/T in advance, when you finish the Telegraphic Transfer, please send the bank slip to us, and then we can prepare for you, save time.
5 Specially-made We can create new model solar water heater suited to your market accord to your request.
Commercial term
No Item Description
1. Price term FOB Shanghai, China; CNF/CIF destination port
2. Price validity 15 days
3. Loading port Shanghai, China
4. Destination port As per your request
5. Minimum order quantity 1 set for sample
6. Package Sample Foam + Carton + Plywood pallet, FCL Foam + Carton
7. Delivery time Sample 1-10 days, FCL 15 days
8. Payment Sample 100% T/T in advance, FCL 30% T/T in advance, balance against the copy of B/L;
9. Manufacture capacity 6000 sets/month
10. Warranty 5 years for the whole system, 10 years for vacuum tubes
OEM service
Please contact with us.
Our quotation:
Trust us as the sun raise!
1)SPF, EN12975, Solar Keymark
2)High efficiency
3)Pressure system
4)Solar pool heat system
Vacuum Solar Collector
2. Vacuum Tubes:
1) Hail resistance: ≤25mm
2) Diameter of tube (mm): 47/58/65mm
3) Glass quality: Borosilicate glass 3.3
4) Thickness (mm): 1.6 or 2 mm
5) Vacuum degree (Pa): 3 x 10-3
6) Absorb rate: ≥0.94
7) Reflecting emission: <0.06
8) Material of coating: Al-N/Al
3. Jinyi Vacuum Solar Collector Features:
1) Suit for such large scale solar water heating solution as hotel, school, and public bath, etc.
2) The product successfully carries out the installation of separation according to Fabricating yard and is harmoniously blended with architecture.
3) It can supply plenty of hot water, and it is safer and more comfortable.
4) It can supply for several outlets at the same time, so it can fit for various requirement.
5) Flexible installation.
6) Beat rising energy cost and help the environment.
Place of Origin
China
Model Number
Model: JNCV
Price Terms
FOB, CIF
Brand Name
Jinyi & OEM
Payment Terms
T/T, L/C
Minimum Order
1 sets
Supply Ability
3,000 sets/month
Delivery Time
7 days
Mode
Area
Vacuum tube
Tube orientation
Loading Qty (set)
Dia.(mm)
Len(mm)
Qty(pcs)
20'
40'
40'H
JNCH-4715-50
4.56
47
1500
50
horizontal
72
150
170
JNCH-5818-50
6.4
58
1800
50
horizontal
65
138
150
Sample service
Sample FAQ:
1) May I get a sample?
Yes! As we know: no sample, no business! So we offer sample for your evaluation first.
2) What's the sample package?
Our normal package for full container is carton and foam;
Just to be on the safe side, we have to use the plywood pallet for protect it, arrival more safety.
3) What about the transportation?
We suggest by sea (LCL shipping).
On one hand, the vacuum tube is glass product, if through air express, the airport convey is imbrutementthe,
so the tube may be broken; On the other hand, the air express freight is huge.
4) What about the sample delivery time?
Normally, the sample delivery time is 7-12days.
Sample term
No. Item Description
1 Package Plywood pallet; the material is exempt from custom examination, you are no need to worry about it.
2 Delivery time For conventional products, the delivery time can be within 3 days; For unconventional products, the delivery time is 7-12 days.
3 Additional charge Plywood pallet + Inland transportation fee, based on the package size.
4 Sample payment 100% T/T in advance, when you finish the Telegraphic Transfer, please send the bank slip to us, and then we can prepare for you, save time.
5 Specially-made We can create new model solar water heater suited to your market accord to your request.
Commercial term
No Item Description
1. Price term FOB Shanghai, China; CNF/CIF destination port
2. Price validity 15 days
3. Loading port Shanghai, China
4. Destination port As per your request
5. Minimum order quantity 1 set for sample
6. Package Sample Foam + Carton + Plywood pallet, FCL Foam + Carton
7. Delivery time Sample 1-10 days, FCL 15 days
8. Payment Sample 100% T/T in advance, FCL 30% T/T in advance, balance against the copy of B/L;
9. Manufacture capacity 6000 sets/month
10. Warranty 5 years for the whole system, 10 years for vacuum tubes
OEM service
Please contact with us.
Our quotation:
Trust us as the sun raise!
Subscribe to:
Posts (Atom)