RDC-Y-3

Uses air operated back to get up the type switch to cover the way,stable cover-opening, to ensure the safety of the operator.
Technical Parameter

Semi-automatic Laminator
The overview of the equipment
Type
RDCY3
Laminating area
2.2m×1.1m
Dimension
2.52m×1.73 m×1.35m
Weight
4.5 T
Power supply
380V 3 phase 4wire
Peak power
27KW
Pumping speed
15L/S
Work power
15KW
Control mode
Automatic/ Manual
Ultimate vacuum
20PA
Heating mode
SD320 Heat by oil
Temperature control mode
Japanese Yokogawa three chip PID Control
Maximum temperature
180
Temperature uniformity
±1.5, Multi-point temperature control
Work temperature
100∼160
Controllable temperature precise
≤±0.8(at the regulated set temperature value
Unevenness of the worktable
Unevenness ≤200μm/m2
Air discharge speed
Can adjust continuously within 0∼50L/S
Press of compressed air
0.50.8MPA
Flow volume of compressed air
420800L/S
Pumping time
57 min
Laminating time
20 Min
Work vacuum degree
80-20Pa
Height of Laminating cavity
40mm
Cylinder Stroke length
360mm
Rubber board