1000 watt solar panel
1.225w,60cell
2.Monocrystalline silicon
3.UL,CE,TUV
4.solar panel for home use
1000 watt solar panel for home use
sell 1000 watt solar panel for home use
1.High efficiency ,the module efficiency of 14.5%
2.Mono crystalline silicon solar cell
3.High transparent low-iron tempered glass
Model
Wp(w)
Vmp(V)
Imp(A)
Voc(V)
Isc(A)
Cell
GT-72M-195
195
36.7
5.32
44.7
5.75
72
GT-72M-190
190
36.6
5.2
44.6
5.62
72
GT-72M-185
185
36.5
5.07
44.5
5.48
72
GT-72M-180
180
36.4
4.95
44.4
5.35
72
GT-72M-175
175
35.9
4.87
44.2
5.29
72
GT-72M-170
170
35.8
4.75
44.1
5.16
72
GT-72M-165
165
35.7
4.62
43.9
5.02
72
GT-60M-155
155
30.3
5.11
37.2
5.56
60
GT-60M-150
150
30.2
4.96
37.1
5.4
60
GT-60M-145
145
30.1
4.81
37
5.23
60
GT-60M-140
140
30.2
4.66
36.8
5.07
60
GT-60M-135
135
29.9
4.51
36.7
4.9
60
GT-60M-130
130
29.8
4.36
36.6
4.74
60
GT-54M-140
140
27.3
5.13
33.5
5.58
54
GT-54M-135
135
27.2
4.96
33.4
5.4
54
GT-54M-130
130
27.1
4.8
33.3
5.21
54
GT-54M-125
125
27
4.63
33.2
5.03
54
GT-54M-120
120
26.9
4.46
33
4.84
54
GT-54M-115
115
26.8
4.28
32.9
4.66
54
GT-48M-125
125
24.3
5.15
29.8
5.6
48
GT-48M-120
120
24.2
4.96
29.7
5.4
48
GT-48M-115
115
24.1
4.77
29.6
5.19
48
GT-48M-110
110
24
4.58
29.5
4.98
48
GT-48M-105
105
23.9
4.39
29.4
4.77
48
GT-48M-100
100
23.9
4.19
29.3
4.55
48
GT-36M-90
90
18.1
4.98
22.2
5.41
36
GT-36M-85
85
18
4.72
22.1
5.13
36
GT-36M-80
80
18
4.46
22
4.84
36
GT-36M-75
75
17.9
4.19
22
4.55
36
GT-36M-60
60
17.5
3.43
21.47
3.73
36
GT-36M-55
55
17.2
3.2
21.15
3.47
36
GT-36M-50
50
17.2
2.91
21.15
3.2
36
GT-36M-45
45
17.5
2.57
21.47
2.8
36
GT-36M-40
40
17.2
2.33
21.15
2.6
36
specifications
Electrical Characteristics
(STC: Irradiance 1000W/m2 ,AM:1.5,Module temperature 25°C)
Model
XH
SM160
SM165
SM170
SM175
SM180
SM185
Maximum Power
PMAX
160W
165W
170W
175W
180W
185W
Optimum operating voltage
VMP
35.62V
35.80V
36.13V
36.24V
36.30V
36.30V
Optimum operating current
IMP
4.49A
4.60A
4.71A
4.83A
4.95A
5.09A
Open-circuit voltage
VOC
43.90V
44.12V
44.16V
44.25V
44.60V
44.60V
Short-circuit current
ISC
5.07A
5.19A
5.30A
5.50A
5.61A
5.80A
Operating temperature
-40°Cto+85°C
Maximum system voltage
1000V DC
Power tolerance
±3%
Saturday, March 19, 2011
sell heat pipe solar collector for home use
solar collector
1.Aluminium alloy
2.zincification painting bracket
3.CE,solar keymark ,srcc
4.tank :200L
solar collector
1.sell solar collector for home use
2.Vacuum tube with Copper pipe( heat pipe)
3.Material of Vacuum Tube: Borosilicate glass 3.3 ,coating: Al/N/Al ,CU-SS-AL
4. 5years' international responsibility for free repairing or exchange due to origina
sell solar collector with good quality
We can produce the solar collector as your requirement.If you have any special requirements.
Technical Data of solar energy water heater collector
Description
Solar energy water heater collector
Numbers of tube(pcs)
30
Absorber area approx.(m2)
2.812
Hydraulic Connections
G3/4" male thread
Fluid volume(L)
1.5
Maximum operation pressure(Bar)
6
Test pressure(Bar)
9
Heat transfer fluid
Anti-freeze Fluid (Water-Glycol)
Max.working temp.
250C
hot water(L/Day)
240
ΔT
35C(Radiation>=800w/m2.day)
Collector efficiency
76.4%
Medium
Pure water
Start-up Temperature of heat pipe
<=30C
warranty
5 years
Heat pipe solar collector material specification
Flow type
Heat pipe
Heat pipe material
TU1 copper
Heat pipe size
Top: Ø14* 0.8mm; Body: Ø8* 0.6mm
Tube diameter
φ47/1500mm or φ58/1800mm
Solar vaccum glass tube
High boron-silicon
Coating of absorber on glass tube
Al-N-Al,Copper,Stainless steel
fins around heat pipe
single long Aluminum(1.68m)
Manifold pipe material
TP2 copper (Ø35x0.8mm)
Manifold casing material
Aluminum alloy (2.0mm)
Insulation material in manifold casing
Glass fiber
Thickness of insulation(mm)
45
Density of insulation (kg/m3)
90
Frame material
Aluminum alloy frame (2.0mm)
Sealing Materials
EPDM
1.Aluminium alloy
2.zincification painting bracket
3.CE,solar keymark ,srcc
4.tank :200L
solar collector
1.sell solar collector for home use
2.Vacuum tube with Copper pipe( heat pipe)
3.Material of Vacuum Tube: Borosilicate glass 3.3 ,coating: Al/N/Al ,CU-SS-AL
4. 5years' international responsibility for free repairing or exchange due to origina
sell solar collector with good quality
We can produce the solar collector as your requirement.If you have any special requirements.
Technical Data of solar energy water heater collector
Description
Solar energy water heater collector
Numbers of tube(pcs)
30
Absorber area approx.(m2)
2.812
Hydraulic Connections
G3/4" male thread
Fluid volume(L)
1.5
Maximum operation pressure(Bar)
6
Test pressure(Bar)
9
Heat transfer fluid
Anti-freeze Fluid (Water-Glycol)
Max.working temp.
250C
hot water(L/Day)
240
ΔT
35C(Radiation>=800w/m2.day)
Collector efficiency
76.4%
Medium
Pure water
Start-up Temperature of heat pipe
<=30C
warranty
5 years
Heat pipe solar collector material specification
Flow type
Heat pipe
Heat pipe material
TU1 copper
Heat pipe size
Top: Ø14* 0.8mm; Body: Ø8* 0.6mm
Tube diameter
φ47/1500mm or φ58/1800mm
Solar vaccum glass tube
High boron-silicon
Coating of absorber on glass tube
Al-N-Al,Copper,Stainless steel
fins around heat pipe
single long Aluminum(1.68m)
Manifold pipe material
TP2 copper (Ø35x0.8mm)
Manifold casing material
Aluminum alloy (2.0mm)
Insulation material in manifold casing
Glass fiber
Thickness of insulation(mm)
45
Density of insulation (kg/m3)
90
Frame material
Aluminum alloy frame (2.0mm)
Sealing Materials
EPDM
2000W solar energy system
1.2000W solar energy system
2.Long lifespan and strong warranty
3.Tech. support
3.CE/IEC/ISO
4.Easy bankable
2000W solar energy system
The advantage of solar system includes no pollution, safety, credible, long lifespan, easy maintenance, etc.
Under the guidance of the United Nations’s policy on environmental protection, we dedicated ourself in improving the enviromental condition of hunman being and providing the most suitable energy solutions: constantly supplying the power and technology to the Third World countries and offering assistance to those people for protecting the enviroment of their homeland; providing American-european countries with renewable energy to help them reduce the releasing of the harmful waste gas; making the homeland we live in more beautiful and clearer.
Solar module(solar panel) product is ideal for roof top or ground mounted large, medium or small sized off-grid and on-grid solar power systems where long term economics, reliability and environmental issues are of a real concern. Each of our finished products must go through various rigorous in-house reliability tests, i.e., LID under natural sunlight as well as artificial sunlight to guarantee the rated power output.
Pictures
2.Long lifespan and strong warranty
3.Tech. support
3.CE/IEC/ISO
4.Easy bankable
2000W solar energy system
The advantage of solar system includes no pollution, safety, credible, long lifespan, easy maintenance, etc.
Under the guidance of the United Nations’s policy on environmental protection, we dedicated ourself in improving the enviromental condition of hunman being and providing the most suitable energy solutions: constantly supplying the power and technology to the Third World countries and offering assistance to those people for protecting the enviroment of their homeland; providing American-european countries with renewable energy to help them reduce the releasing of the harmful waste gas; making the homeland we live in more beautiful and clearer.
Solar module(solar panel) product is ideal for roof top or ground mounted large, medium or small sized off-grid and on-grid solar power systems where long term economics, reliability and environmental issues are of a real concern. Each of our finished products must go through various rigorous in-house reliability tests, i.e., LID under natural sunlight as well as artificial sunlight to guarantee the rated power output.
Pictures
sell pressurized solar water heater for home use
pressurized solar water heater
1.Aluminium alloy
2.zincification painting bracket
3.solar water tank
4.srcc,CE,solar keymark
pressurized solar water heater
1.sell pressurized solar water heater for home use
2.Vacuum tube with Copper pipe( heat pipe)
3.Material of Vacuum Tube: Borosilicate glass 3.3 ,coating: Al/N/Al ,CU-SS-AL
4. 5years' international responsibility for free repairing or exchange due to origina
5.Inner tank:SUS304/ 2BFood Grade stainless steel ,1.5mm,370mm
6.Outer tank:Galvanized steel,0.4mm,460mm
sell pressurized solar water heater with good quality
We can produce the solar collector as your requirement.If you have any special requirements.
MODEL NO.
HSC-01
Copper Riser Tubes Spec. & Qty(mm)
10 * δ0.50 * 1886 , 8pcs copper
Copper Header Tubes Spec. & Qty(mm)
22 * δ0.6 * 1060
2pcs copper
Copper Absorber Fin Spec. & Qty(mm)
125 * δ0.15 ,8pcs, all cooper fin, ultrasonic welding
Spectrum Absorber Coating
black chromed with black chrome
Optical Performance
absorption +95% , emission +10%
Insulation Material
50 mm fiber glass cotton
Frame
Aluminum alloy frame
Glass cover
Low Iron pattern tempered glass,transmission >91%
Gross Area
2sqm
Cover Thickness
4mm
Aperture Area
1.85
Heat Transfer Fluid
portable water and other heat transfer fluid
Fluid Volume(l)
1.7
Backing Sheet
0.5mm galvanized steel
Net Weight(kg)
32.5
Gross Weight(kg)
40
Net Dimension L*W*H(mm)
2000*1000*85
Package Dimension(mm)
2010*1020*97
Working pressure
0.6Mpa
Testing pressure
1.2Mpa for 5 minutes
Qty for 20' GP Container
140PCS
Qty for 40' GP Container
290 PCS
Flow type
Heat pipe
Heat pipe material
TU1 copper
Heat pipe size
Top: Ø14* 0.8mm; Body: Ø8* 0.6mm
Tube diameter
φ47/1500mm or φ58/1800mm
Solar vaccum glass tube
High boron-silicon
Coating of absorber on glass tube
Al-N-Al,Copper,Stainless steel
fins around heat pipe
single long Aluminum(1.68m)
Manifold pipe material
TP2 copper (Ø35x0.8mm)
Manifold casing material
Aluminum alloy (2.0mm)
Insulation material in manifold casing
Glass fiber
Thickness of insulation(mm)
45
Density of insulation (kg/m3)
90
Frame material
Aluminum alloy frame (2.0mm)
Sealing Materials
EPDM
1.Aluminium alloy
2.zincification painting bracket
3.solar water tank
4.srcc,CE,solar keymark
pressurized solar water heater
1.sell pressurized solar water heater for home use
2.Vacuum tube with Copper pipe( heat pipe)
3.Material of Vacuum Tube: Borosilicate glass 3.3 ,coating: Al/N/Al ,CU-SS-AL
4. 5years' international responsibility for free repairing or exchange due to origina
5.Inner tank:SUS304/ 2BFood Grade stainless steel ,1.5mm,370mm
6.Outer tank:Galvanized steel,0.4mm,460mm
sell pressurized solar water heater with good quality
We can produce the solar collector as your requirement.If you have any special requirements.
MODEL NO.
HSC-01
Copper Riser Tubes Spec. & Qty(mm)
10 * δ0.50 * 1886 , 8pcs copper
Copper Header Tubes Spec. & Qty(mm)
22 * δ0.6 * 1060
2pcs copper
Copper Absorber Fin Spec. & Qty(mm)
125 * δ0.15 ,8pcs, all cooper fin, ultrasonic welding
Spectrum Absorber Coating
black chromed with black chrome
Optical Performance
absorption +95% , emission +10%
Insulation Material
50 mm fiber glass cotton
Frame
Aluminum alloy frame
Glass cover
Low Iron pattern tempered glass,transmission >91%
Gross Area
2sqm
Cover Thickness
4mm
Aperture Area
1.85
Heat Transfer Fluid
portable water and other heat transfer fluid
Fluid Volume(l)
1.7
Backing Sheet
0.5mm galvanized steel
Net Weight(kg)
32.5
Gross Weight(kg)
40
Net Dimension L*W*H(mm)
2000*1000*85
Package Dimension(mm)
2010*1020*97
Working pressure
0.6Mpa
Testing pressure
1.2Mpa for 5 minutes
Qty for 20' GP Container
140PCS
Qty for 40' GP Container
290 PCS
Flow type
Heat pipe
Heat pipe material
TU1 copper
Heat pipe size
Top: Ø14* 0.8mm; Body: Ø8* 0.6mm
Tube diameter
φ47/1500mm or φ58/1800mm
Solar vaccum glass tube
High boron-silicon
Coating of absorber on glass tube
Al-N-Al,Copper,Stainless steel
fins around heat pipe
single long Aluminum(1.68m)
Manifold pipe material
TP2 copper (Ø35x0.8mm)
Manifold casing material
Aluminum alloy (2.0mm)
Insulation material in manifold casing
Glass fiber
Thickness of insulation(mm)
45
Density of insulation (kg/m3)
90
Frame material
Aluminum alloy frame (2.0mm)
Sealing Materials
EPDM
sell stainless steel solar water heater for home use
stainless steel solar water heater
1.Aluminium alloy
2.zincification painting bracket
3.CE,solar keymark ,srcc
4.tank :200L
stainless steel solar water heater
1.sell stainless steel solar water heater for home use
2.Vacuum tube with Copper pipe( heat pipe)
3.Material of Vacuum Tube: Borosilicate glass 3.3 ,coating: Al/N/Al ,CU-SS-AL
4. 5years' international responsibility for free repairing or exchange due to origina
sell stainless steel solar water heater with good quality
We can produce the solar collector as your requirement.If you have any special requirements.
1.Aluminium alloy
2.zincification painting bracket
3.CE,solar keymark ,srcc
4.tank :200L
stainless steel solar water heater
1.sell stainless steel solar water heater for home use
2.Vacuum tube with Copper pipe( heat pipe)
3.Material of Vacuum Tube: Borosilicate glass 3.3 ,coating: Al/N/Al ,CU-SS-AL
4. 5years' international responsibility for free repairing or exchange due to origina
sell stainless steel solar water heater with good quality
We can produce the solar collector as your requirement.If you have any special requirements.
semi flexible panel 130w
1.Stable cell performance
2.High eff. colse to the total eff. of the cell before process
3.High performance with weak sunshine
1.Cell:125*125mm
2.Dimension:1197*808*35mm
3.No.of Cells:36(4*9)
4.Weight:10.5kg
5.Junction Box:Ip75 rated
6.Vmp:27.3V
7.Imp:4.77A
8.Voc:32.8V
9.Isc:5.25A
2.High eff. colse to the total eff. of the cell before process
3.High performance with weak sunshine
1.Cell:125*125mm
2.Dimension:1197*808*35mm
3.No.of Cells:36(4*9)
4.Weight:10.5kg
5.Junction Box:Ip75 rated
6.Vmp:27.3V
7.Imp:4.77A
8.Voc:32.8V
9.Isc:5.25A
separated pressurized solar water heater 2011 new products
pressurized solar water heaters
1.Technology stability;
2.Durable and economic;
3.High quality
4.Long lifetimesw
pressurized solar water heaters
Features:
1)Reliable & efficient twin-glass solar tube
2)Copper heat pipes for rapid heat transfer
3)Easy plug-in installation
4)Free maintenance
5)Suitable for mains pressure water(up to 1.0bar)
6)Corrosion resistance silver brazed copper header
7)Aluminum frame
8)Powder coated (black white brown or silver) aluminum casing
9)Stable solar conversion during the day
10)The perfect solar collector for domestic solar water heater systems
11)Ideal for commercial solar water heating applications
Work principle
1)the operation of the solar collector is very simple
2)Solar absorption:Solar radiation is absorbed by the solar tube & converted into heat
3)Solar heater transfer:Heat pipes conduct the heat from within the solar tube up to the header pipe
4)Solar energy storage:Water is circulated through the header, via intermittent pump cycling.Each time the water circulates through the header, the temperature is raised by 5-10 centigarde.Throughout the day, the water in the tank is gradually heated
Technical Specification
Manifold Casing material:Aluminum
Frame material:Aluminum
Header Pipe material:Copper
Heat pipe material:Copper
Insulation:Rock wool
Rubber seals & rings UV Stabilized high temperature silicon rubber
Collector Mounting flat roof/inclined roof
Mounting angle:15-50 degree
Inlet:3/4
1.Technology stability;
2.Durable and economic;
3.High quality
4.Long lifetimesw
pressurized solar water heaters
Features:
1)Reliable & efficient twin-glass solar tube
2)Copper heat pipes for rapid heat transfer
3)Easy plug-in installation
4)Free maintenance
5)Suitable for mains pressure water(up to 1.0bar)
6)Corrosion resistance silver brazed copper header
7)Aluminum frame
8)Powder coated (black white brown or silver) aluminum casing
9)Stable solar conversion during the day
10)The perfect solar collector for domestic solar water heater systems
11)Ideal for commercial solar water heating applications
Work principle
1)the operation of the solar collector is very simple
2)Solar absorption:Solar radiation is absorbed by the solar tube & converted into heat
3)Solar heater transfer:Heat pipes conduct the heat from within the solar tube up to the header pipe
4)Solar energy storage:Water is circulated through the header, via intermittent pump cycling.Each time the water circulates through the header, the temperature is raised by 5-10 centigarde.Throughout the day, the water in the tank is gradually heated
Technical Specification
Manifold Casing material:Aluminum
Frame material:Aluminum
Header Pipe material:Copper
Heat pipe material:Copper
Insulation:Rock wool
Rubber seals & rings UV Stabilized high temperature silicon rubber
Collector Mounting flat roof/inclined roof
Mounting angle:15-50 degree
Inlet:3/4
seperated pressurized solar collector
1.Solar Keymark(EN12975),CE ,ISO9001 and ISO14001 certifications
2.Delivery time :7--15 days
3.Three years warranty
Manifold material: TU1 with 1 mm thickness
Insulation: rock wool
Vacuum tube: 1.6 to 2mm
High borosilicate glass
Thickness: 1.6 to 2mm
Diameter: 47/58mm
Length: 1,500 and 1,800mm
Hail resistance: 25 mm
Heat pipe: oxygen free red copper
Seal ring: silicone rubber
Frame: Aluminum alloy with 2.5 mm thickness
Corrosion-resistant
No water in tubes so never burst and fur up, high heat conduction and never hibernates
Copper heat pipes for rapid heat transfer
Combined harmoniously with architecture and free maintenance
Suitable for mains pressure water (up to 0.6MPa)
2.Delivery time :7--15 days
3.Three years warranty
Manifold material: TU1 with 1 mm thickness
Insulation: rock wool
Vacuum tube: 1.6 to 2mm
High borosilicate glass
Thickness: 1.6 to 2mm
Diameter: 47/58mm
Length: 1,500 and 1,800mm
Hail resistance: 25 mm
Heat pipe: oxygen free red copper
Seal ring: silicone rubber
Frame: Aluminum alloy with 2.5 mm thickness
Corrosion-resistant
No water in tubes so never burst and fur up, high heat conduction and never hibernates
Copper heat pipes for rapid heat transfer
Combined harmoniously with architecture and free maintenance
Suitable for mains pressure water (up to 0.6MPa)
seperated pressurized solar collector
1.SRCC,Solar Keymark(EN12975),CE ,ISO9001 and ISO14001 certifications
2.Delivery time : 7--15 days
3.Three years warranty
Manifold material: TU1 with 1 mm thickness
Insulation: rock wool
Vacuum tube: 1.6 to 2mm
High borosilicate glass
Thickness: 1.6 to 2mm
Diameter: 47/58mm
Length: 1,500 and 1,800mm
Hail resistance: 25 mm
Heat pipe: oxygen free red copper
Seal ring: silicone rubber
Frame: Aluminum alloy with 2.5 mm thickness
Corrosion-resistant
No water in tubes so never burst and fur up, high heat conduction and never hibernates
Copper heat pipes for rapid heat transfer
Combined harmoniously with architecture and free maintenance
Suitable for mains pressure water (up to 0.6MPa)
Key features of the Meida Solar Collector.
1. Internationally certified product (EN12975 KEMARY)
2. Copper heat pipes for rapid heat transfer and freeze resistant.
3. Reliable, efficient, tri-element evacuated vacuum tubes
4. Easy plug-in installation
5. Maintenance free
6. Suitable for mains pressure water (up to 6bars)
7. Corrosion resistant material (aluminum and copper)
8. Aluminum frame 2.5mm thickness
9. Black or Silver aluminum casing in good insulated
10. Stable solar conversion throughout the day
11. The best solar collector for domestic solar water heater systems
12. Ideal for commercial solar water heater applications
Working principle:
The selective coating on the inner cover of the evacuated tubes converts solar energy into heat energy and transfers heat to the heat pipes by aluminum fins, the liquid in the heat pipe changes into vapour which rises to the condenser. The heat then passes through the heat exchanger and the vapour becomes liquid, returning to the base of the heat pipe. The heat conducts to the heat transfer liquid(ante-freezing liquid or water) via a copper pipe. This transference of heat into the liquid creates a continuous circulation as long as the collector is heated by the sun.
2.Delivery time : 7--15 days
3.Three years warranty
Manifold material: TU1 with 1 mm thickness
Insulation: rock wool
Vacuum tube: 1.6 to 2mm
High borosilicate glass
Thickness: 1.6 to 2mm
Diameter: 47/58mm
Length: 1,500 and 1,800mm
Hail resistance: 25 mm
Heat pipe: oxygen free red copper
Seal ring: silicone rubber
Frame: Aluminum alloy with 2.5 mm thickness
Corrosion-resistant
No water in tubes so never burst and fur up, high heat conduction and never hibernates
Copper heat pipes for rapid heat transfer
Combined harmoniously with architecture and free maintenance
Suitable for mains pressure water (up to 0.6MPa)
Key features of the Meida Solar Collector.
1. Internationally certified product (EN12975 KEMARY)
2. Copper heat pipes for rapid heat transfer and freeze resistant.
3. Reliable, efficient, tri-element evacuated vacuum tubes
4. Easy plug-in installation
5. Maintenance free
6. Suitable for mains pressure water (up to 6bars)
7. Corrosion resistant material (aluminum and copper)
8. Aluminum frame 2.5mm thickness
9. Black or Silver aluminum casing in good insulated
10. Stable solar conversion throughout the day
11. The best solar collector for domestic solar water heater systems
12. Ideal for commercial solar water heater applications
Working principle:
The selective coating on the inner cover of the evacuated tubes converts solar energy into heat energy and transfers heat to the heat pipes by aluminum fins, the liquid in the heat pipe changes into vapour which rises to the condenser. The heat then passes through the heat exchanger and the vapour becomes liquid, returning to the base of the heat pipe. The heat conducts to the heat transfer liquid(ante-freezing liquid or water) via a copper pipe. This transference of heat into the liquid creates a continuous circulation as long as the collector is heated by the sun.
seperated pressurized solar collector
1.Solar Keymark(EN12975),CE ,ISO9001 and ISO14001,SRCC certifications
2.Delivery time :7days
3.more than 15 years service life
Manifold material: TU1 with 1 mm thickness
Insulation: rock wool
Vacuum tube: 1.6 to 2mm
High borosilicate glass
Thickness: 1.6 to 2mm
Diameter: 47/58mm
Length: 1,500 and 1,800mm
Hail resistance: 25mm
Heat pipe: oxygen free red copper
Seal ring: silicone rubber
Frame: Aluminum alloy with 2.5 mm thickness
Corrosion-resistant
No water in tubes so never burst and fur up, high heat conduction and never hibernates
Copper heat pipes for rapid heat transfer
Combined harmoniously with architecture and free maintenance
Suitable for mains pressure water (up to 0.6MPa)
2.Delivery time :7days
3.more than 15 years service life
Manifold material: TU1 with 1 mm thickness
Insulation: rock wool
Vacuum tube: 1.6 to 2mm
High borosilicate glass
Thickness: 1.6 to 2mm
Diameter: 47/58mm
Length: 1,500 and 1,800mm
Hail resistance: 25mm
Heat pipe: oxygen free red copper
Seal ring: silicone rubber
Frame: Aluminum alloy with 2.5 mm thickness
Corrosion-resistant
No water in tubes so never burst and fur up, high heat conduction and never hibernates
Copper heat pipes for rapid heat transfer
Combined harmoniously with architecture and free maintenance
Suitable for mains pressure water (up to 0.6MPa)
seperated pressurized solar collector
1.SRCC,Solar Keymark(EN12975),CE ,ISO9001 and ISO14001 certifications
2.Delivery time :7--15 days
3.Three years warranty
Manifold material: TU1 with 1 mm thickness
Insulation: rock wool
Vacuum tube: 1.6 to 2mm
High borosilicate glass
Thickness: 1.6 to 2mm
Diameter: 47/58mm
Length: 1,500 and 1,800mm
Hail resistance: 25 mm
Heat pipe: oxygen free red copper
Seal ring: silicone rubber
Frame: Aluminum alloy with 2.5 mm thickness
Corrosion-resistant
No water in tubes so never burst and fur up, high heat conduction and never hibernates
Copper heat pipes for rapid heat transfer
Combined harmoniously with architecture and free maintenance
Suitable for mains pressure water (up to 0.6MPa)
Key features of the Meida Solar Collector.
1. Internationally certified product (EN12975 KEMARY)
2. Copper heat pipes for rapid heat transfer and freeze resistant.
3. Reliable, efficient, tri-element evacuated vacuum tubes
4. Easy plug-in installation
5. Maintenance free
6. Suitable for mains pressure water (up to 6bars)
7. Corrosion resistant material (aluminum and copper)
8. Aluminum frame 2.5mm thickness
9. Black or Silver aluminum casing in good insulated
10. Stable solar conversion throughout the day
11. The best solar collector for domestic solar water heater systems
12. Ideal for commercial solar water heater applications
Working principle:
The selective coating on the inner cover of the evacuated tubes converts solar energy into heat energy and transfers heat to the heat pipes by aluminum fins, the liquid in the heat pipe changes into vapour which rises to the condenser. The heat then passes through the heat exchanger and the vapour becomes liquid, returning to the base of the heat pipe. The heat conducts to the heat transfer liquid(ante-freezing liquid or water) via a copper pipe. This transference of heat into the liquid creates a continuous circulation as long as the collector is heated by the sun.
2.Delivery time :7--15 days
3.Three years warranty
Manifold material: TU1 with 1 mm thickness
Insulation: rock wool
Vacuum tube: 1.6 to 2mm
High borosilicate glass
Thickness: 1.6 to 2mm
Diameter: 47/58mm
Length: 1,500 and 1,800mm
Hail resistance: 25 mm
Heat pipe: oxygen free red copper
Seal ring: silicone rubber
Frame: Aluminum alloy with 2.5 mm thickness
Corrosion-resistant
No water in tubes so never burst and fur up, high heat conduction and never hibernates
Copper heat pipes for rapid heat transfer
Combined harmoniously with architecture and free maintenance
Suitable for mains pressure water (up to 0.6MPa)
Key features of the Meida Solar Collector.
1. Internationally certified product (EN12975 KEMARY)
2. Copper heat pipes for rapid heat transfer and freeze resistant.
3. Reliable, efficient, tri-element evacuated vacuum tubes
4. Easy plug-in installation
5. Maintenance free
6. Suitable for mains pressure water (up to 6bars)
7. Corrosion resistant material (aluminum and copper)
8. Aluminum frame 2.5mm thickness
9. Black or Silver aluminum casing in good insulated
10. Stable solar conversion throughout the day
11. The best solar collector for domestic solar water heater systems
12. Ideal for commercial solar water heater applications
Working principle:
The selective coating on the inner cover of the evacuated tubes converts solar energy into heat energy and transfers heat to the heat pipes by aluminum fins, the liquid in the heat pipe changes into vapour which rises to the condenser. The heat then passes through the heat exchanger and the vapour becomes liquid, returning to the base of the heat pipe. The heat conducts to the heat transfer liquid(ante-freezing liquid or water) via a copper pipe. This transference of heat into the liquid creates a continuous circulation as long as the collector is heated by the sun.
sharp solar panel(ATL-SP27 3W)
solar panel (ATL-SP27 3W)
1.Mono/Polycrystalline available
2.widely range of power
3.CE approved
4.25years warrent
sharp solar panel (ATL-SP27 3W)
1.Mono/Polycrystalline available
2.widely range of power
3.CE approved
4.25years warrenty
5.we accept customized specification including size and power.
Electrical Parameters(STC)
Standard Test Conditions :Air Mass AM1.5,Irradiance 1000w/m
2
,Cell Temperature 25°C
NOCT:Irradiance 800w/m
2
,Ambient Temperature 20°C,Wind speed 1m/s
PLEASE NOTICE:
above description just for references,neither match the picture nor accurate
pls feel free to cantact us to get the latest information
any response will be appreciated by us!
1.Mono/Polycrystalline available
2.widely range of power
3.CE approved
4.25years warrent
sharp solar panel (ATL-SP27 3W)
1.Mono/Polycrystalline available
2.widely range of power
3.CE approved
4.25years warrenty
5.we accept customized specification including size and power.
Electrical Parameters(STC)
Standard Test Conditions :Air Mass AM1.5,Irradiance 1000w/m
2
,Cell Temperature 25°C
NOCT:Irradiance 800w/m
2
,Ambient Temperature 20°C,Wind speed 1m/s
PLEASE NOTICE:
above description just for references,neither match the picture nor accurate
pls feel free to cantact us to get the latest information
any response will be appreciated by us!
silicon Wafer
silicon Wafer 156*156
smooth and clean supface,free from cracks,marks,any spots,and obvious cutting breaking lines.
Polycrystalline silicon wafers
Conduction type: P type
Wafer dimension: 156*156+/-0.5mm
Thickness: 200μm+/-10%
Resistivity: 0.26ohm.cm
Lifetime: ≥ 2 μs
Damagement ≤20μm
TTV: ≤30μm
Squareness: 90+/-0.3
Erythroculter angle : ≤40μm
Oxygen Concent < 1*10 E18Atoms/ cm 3
Carbon Concent < 5*10E 17 Atoms / cm 3
Surface is clean ,broken edge ,broken angle≤1mm,and there are most two in per wafer. free from visible stains, no visible cracks ,no holes,no visible knife-edge
smooth and clean supface,free from cracks,marks,any spots,and obvious cutting breaking lines.
Polycrystalline silicon wafers
Conduction type: P type
Wafer dimension: 156*156+/-0.5mm
Thickness: 200μm+/-10%
Resistivity: 0.26ohm.cm
Lifetime: ≥ 2 μs
Damagement ≤20μm
TTV: ≤30μm
Squareness: 90+/-0.3
Erythroculter angle : ≤40μm
Oxygen Concent < 1*10 E18Atoms/ cm 3
Carbon Concent < 5*10E 17 Atoms / cm 3
Surface is clean ,broken edge ,broken angle≤1mm,and there are most two in per wafer. free from visible stains, no visible cracks ,no holes,no visible knife-edge
2000W solar power system
2000W solar power system
Designed specifically to suit customers' needs
Simple installation and easy operation
2000W solar power system
A stand-alone solar system for households, businesses, factories and so on in remote locations without utility grids or an area where blackouts and brownouts are relatively common.
The technical specification of 2000W off grid solar system is as below:
Designed specifically to suit customers' needs
Simple installation and easy operation
2000W solar power system
A stand-alone solar system for households, businesses, factories and so on in remote locations without utility grids or an area where blackouts and brownouts are relatively common.
The technical specification of 2000W off grid solar system is as below:
silicon Solar Cell
manufacture solar cells both poly and mono
125*125, 156*156
produce solar module up to 280watt
TUV,VDE,UL,FLORIDA,ETL,CE,ISO
125*125, 156*156
produce solar module up to 280watt
TUV,VDE,UL,FLORIDA,ETL,CE,ISO
silicon crystalline solar panel 50W
1.monocrystalline silicon solar panel 50W
2. size: 830*552*30mm
3. solar cell number: 24pcs
4. mono125 solar cell,
CNSDPV50(S)
Specifications
Model
CNSDPV50S
Maximum Power (Wp)
51.5
Open circuit voltage (Voc)
21.6
Short circuit current (Isc)
2.98
Maxmium power voltage (Vm)
18.54
Maxmium power current (Im)
2.7
Cell efficiency (%)
13.5%
Max system voltage (V DC)
750V DC
Temperature coefficient of Vm
-0.3%/K
Temperature coefficient of Im
0.03%/K
Temperature coefficient of Wp
-0.42%/K
Solar cell and configuration
4*18 matrix connected in series; Mono 125*125
Junction box
IP65, 1000V TUV certificated with 2pcs bypass diodes
Cable type
Cable cross section size 4mm2, TUV certificated, 900mm length;
Encapsulation
Low iron tempered glass, 3.2mm thickness, light transmission above 91%, TPT and fast cure EVA
Frame
Clear anodized aluminum alloy
Dimension(L*W*H)
830*552*30mm
Weight
6.2kg
Heavy mechanical load
2400Pa(IEC61215)
Hail impact test
Diameter 25mm ice ball; 23M/S
Operating temperature
-40~+85degree
Standard Test Condition: 1000W/m2, Cell temperature 25 degree, AM=1.5
2. size: 830*552*30mm
3. solar cell number: 24pcs
4. mono125 solar cell,
CNSDPV50(S)
Specifications
Model
CNSDPV50S
Maximum Power (Wp)
51.5
Open circuit voltage (Voc)
21.6
Short circuit current (Isc)
2.98
Maxmium power voltage (Vm)
18.54
Maxmium power current (Im)
2.7
Cell efficiency (%)
13.5%
Max system voltage (V DC)
750V DC
Temperature coefficient of Vm
-0.3%/K
Temperature coefficient of Im
0.03%/K
Temperature coefficient of Wp
-0.42%/K
Solar cell and configuration
4*18 matrix connected in series; Mono 125*125
Junction box
IP65, 1000V TUV certificated with 2pcs bypass diodes
Cable type
Cable cross section size 4mm2, TUV certificated, 900mm length;
Encapsulation
Low iron tempered glass, 3.2mm thickness, light transmission above 91%, TPT and fast cure EVA
Frame
Clear anodized aluminum alloy
Dimension(L*W*H)
830*552*30mm
Weight
6.2kg
Heavy mechanical load
2400Pa(IEC61215)
Hail impact test
Diameter 25mm ice ball; 23M/S
Operating temperature
-40~+85degree
Standard Test Condition: 1000W/m2, Cell temperature 25 degree, AM=1.5
silicon ingot
monocrystal silicon ingot , raw material of solar wafer, cell & modules !
6'' , 6.5'' , 8 inch . different size !
Item
monocrystal silicon ingot
Size
Pseudo Squared 125*125*165mm
Carbon content
≤5*10
16
atom/cm
3
Oxygen Concentration
≤ 1*10
18
atom/cm
3
Resistivity
1-3 ohm/cm
Conductivity Type
P type
lifespan
>3us
Packaging
foam box /piece
Price
EXW TIAN JIN
Payment
T/T after inspection
WE HOPE TO ESTABLISH LONG-TERM COOPERATION WITH YOU!
WE ARE PROFESSIONAL IN THIS FIELD!
6'' , 6.5'' , 8 inch . different size !
Item
monocrystal silicon ingot
Size
Pseudo Squared 125*125*165mm
Carbon content
≤5*10
16
atom/cm
3
Oxygen Concentration
≤ 1*10
18
atom/cm
3
Resistivity
1-3 ohm/cm
Conductivity Type
P type
lifespan
>3us
Packaging
foam box /piece
Price
EXW TIAN JIN
Payment
T/T after inspection
WE HOPE TO ESTABLISH LONG-TERM COOPERATION WITH YOU!
WE ARE PROFESSIONAL IN THIS FIELD!
silicon powder
(1)Chemical Compositions: Si Fe Al Ca
(2)high-purity Silicon Powder with competitive price
(3)Safe,clean and Sanitary
silicon powder
Characteristics:
Silicon metal is also called industrial silicon or crystalline silicon . It is dark gray . Its point is high , heat performance, excellent antioxidation. The usual size of industrial silicon are in the range of 10-100mm or 2-25mm.
Use :
The silicon metal was manufactured with carbon type reducing agents while silica being melting, it is mainly used in production of alloys especially aluminium alloys poly-crstalline silicon and organic silicon materials .
item no:
GS-S0013 si-3221
Specification type
Chemical composition %
Si (min)
Impurities(% )
Fe
Al
Ca
Si-2202
99.5
0.2
0.2
0.2
Si-3303
99.3
0.3
0.3
0.3
Si-411
99.3
0.4
0.1
0.1
Si-421
99.2
0.4
0.2
0.1
Si-441
99.0
0.4
0.4
0.1
Si-553
98.5
0.5
0.5
0.3
SILICON
Specification type
Si(min)
Chemical composition %
Fe
Al
Ca
For chemical use
(MESH)30-120
99.0
0.4
0.4
0.1
(MESH)40-140
99.0
0.4
0.4
0.1
(MESH)40-160
99.0
0.4
0.4
0.1
(MESH)40-120
99.2
0.35
0.35
0.1
(MESH)40-425
99.0
0.3
0.2
0.05
Metallurgical silicon powder
(MESH)150
98
0.6
0.4
0.2
(MESH)200
99
0.3
0.2
0.1
(MESH)325
99
0.4
0.3
0.2
(MESH)400
98.5
0.5
0.3
0.2
(MESH)600
98.2
0.4
0.4
0.2
Low-grade silica flour
(MESH)200
97
Foreign inclusion<3.0%
(2)high-purity Silicon Powder with competitive price
(3)Safe,clean and Sanitary
silicon powder
Characteristics:
Silicon metal is also called industrial silicon or crystalline silicon . It is dark gray . Its point is high , heat performance, excellent antioxidation. The usual size of industrial silicon are in the range of 10-100mm or 2-25mm.
Use :
The silicon metal was manufactured with carbon type reducing agents while silica being melting, it is mainly used in production of alloys especially aluminium alloys poly-crstalline silicon and organic silicon materials .
item no:
GS-S0013 si-3221
Specification type
Chemical composition %
Si (min)
Impurities(% )
Fe
Al
Ca
Si-2202
99.5
0.2
0.2
0.2
Si-3303
99.3
0.3
0.3
0.3
Si-411
99.3
0.4
0.1
0.1
Si-421
99.2
0.4
0.2
0.1
Si-441
99.0
0.4
0.4
0.1
Si-553
98.5
0.5
0.5
0.3
SILICON
Specification type
Si(min)
Chemical composition %
Fe
Al
Ca
For chemical use
(MESH)30-120
99.0
0.4
0.4
0.1
(MESH)40-140
99.0
0.4
0.4
0.1
(MESH)40-160
99.0
0.4
0.4
0.1
(MESH)40-120
99.2
0.35
0.35
0.1
(MESH)40-425
99.0
0.3
0.2
0.05
Metallurgical silicon powder
(MESH)150
98
0.6
0.4
0.2
(MESH)200
99
0.3
0.2
0.1
(MESH)325
99
0.4
0.3
0.2
(MESH)400
98.5
0.5
0.3
0.2
(MESH)600
98.2
0.4
0.4
0.2
Low-grade silica flour
(MESH)200
97
Foreign inclusion<3.0%
silicon solar cell 125*125
125*125mm silicon solar cell
silicon solar cell with high efficiency,
silicon solar cell 125*125
1
Conductive Type:
P-Type
2
Shape:Square
3
Dopant: Boron
4
Dimension:
125
±
0.5mm
5.
Thickness:
200
±
20um
6.
Resistivity:
1-3
Ω
.cm
7.
Life time:
≥
10us
8.
Saw Mark:<
15um
9.
TTV:
≤
30 um
10.
Warp:
≤
30 um
11.
Oxygen concentration:
≤
1.0X1018at/cm3
12.
Carbon concentration:
≤
5.0X1016at/cm3
13.
Cracks
,
Breakage and holes are not permitted . Surface is clean and without spots.
silicon solar cell with high efficiency,
silicon solar cell 125*125
1
Conductive Type:
P-Type
2
Shape:Square
3
Dopant: Boron
4
Dimension:
125
±
0.5mm
5.
Thickness:
200
±
20um
6.
Resistivity:
1-3
Ω
.cm
7.
Life time:
≥
10us
8.
Saw Mark:<
15um
9.
TTV:
≤
30 um
10.
Warp:
≤
30 um
11.
Oxygen concentration:
≤
1.0X1018at/cm3
12.
Carbon concentration:
≤
5.0X1016at/cm3
13.
Cracks
,
Breakage and holes are not permitted . Surface is clean and without spots.
silicon wafer
solar silicon wafer
1.156mm*156mm silicon wafer
2.High qualified
156mm *156mm Single crystalline silicon wafer specification:
NO.
Item
Specification
Unit
1
Conductivity type
P-type
2
thickness
200±20
mm
3
Dimension
156±0.5
mm
4
Resistivity
0.5-3 , 3-6
Ohm.cm
5
lifetime
≥10
μs
6
TTV
≤30
μm
7
Oxygen Content
≤1.0*10
18
atoms/cm
3
8
Carbon Content
≤5.0*10
16
atoms/cm
3
1.156mm*156mm silicon wafer
2.High qualified
156mm *156mm Single crystalline silicon wafer specification:
NO.
Item
Specification
Unit
1
Conductivity type
P-type
2
thickness
200±20
mm
3
Dimension
156±0.5
mm
4
Resistivity
0.5-3 , 3-6
Ohm.cm
5
lifetime
≥10
μs
6
TTV
≤30
μm
7
Oxygen Content
≤1.0*10
18
atoms/cm
3
8
Carbon Content
≤5.0*10
16
atoms/cm
3
sine wave solar power inverter
sine wave solar power inverter
1.Item No.:RKSI002-2
2.Input voltage range:90-280vac
3.frequency range:50HZ/60HZ+-3%
sine wave solar power inverter for off-grid solar power system
1.Item No.:RKSI002-2
2.Input voltage range:90-280vac
3.frequency range:50HZ/60HZ+-3%
4.Input DC voltage:12v/24v
5.o/p waveform:Sine wave
6.THD:≤3%
7.Transfer time:≤4ms Automatic transfer
8.Re-charge current:0-30A
9.Transfer efficiency:90%
10.Protections:Protection against short-circuit,overload
11.Communication ports:R232
12.AVR:Four steps220vac+-10%
13.Power:300W/500W/1000W
14.Size:372*122*195mm
15.N.W(KG):7.8KG.
1.Item No.:RKSI002-2
2.Input voltage range:90-280vac
3.frequency range:50HZ/60HZ+-3%
sine wave solar power inverter for off-grid solar power system
1.Item No.:RKSI002-2
2.Input voltage range:90-280vac
3.frequency range:50HZ/60HZ+-3%
4.Input DC voltage:12v/24v
5.o/p waveform:Sine wave
6.THD:≤3%
7.Transfer time:≤4ms Automatic transfer
8.Re-charge current:0-30A
9.Transfer efficiency:90%
10.Protections:Protection against short-circuit,overload
11.Communication ports:R232
12.AVR:Four steps220vac+-10%
13.Power:300W/500W/1000W
14.Size:372*122*195mm
15.N.W(KG):7.8KG.
single Target purple golden solar collector
1.Standard 3.3 high-boron-silicon glass-pipe
2.Low coefficient of heat loss
3.Good performance & price
4.15years warranty
Structure
All-glass double-tube co-axial structure
Glass material
High borosilicate 3.3 glass
External pip diameter and thickness
Φ=47±1.0mm§=1.6mm±0.2mm
Φ=58±1.0mm§=1.8mm±0.2mm
Φ=70±1.5mm§=2.2mm±0.3mm
Internal pip diameter and thickness
Φ=37±0.8mm§=1.4mm±0.2mm
Φ=47±1.0mm§=1.6mm±0.2mm
Φ=58±1.0mm§=1.8mm±0.2mm
Pipe length
950mm 1500mm 1600mm 1700mm
1800mm 1900mm 2000mm 2100mm
Absorptive coating property
Structure
Cu/SS-ALN(H)/SS-ALN(L)/ALN
Sediment method
3 target magnetron sputtering plating
Specific absorption
A
s
=0.93~0.96 (AM1.5)
Emission ratio
ε
h
=0.04~0.06 (80±5)
Vacuum tightness
P≤5.0×10
-3
Pa
Idle sunning property parameters
Y=260~300 m
2
.C/KW
Solar irradiation for obtaining a preset water temperature
H≤4.7MJ/m
2
(Φ58)
H=3.7~4.2 MJ/m
2
H≤3.7MJ/m
2
(Φ47)
H=2.9~3.2 MJ/m
2
Average heat loss coefficient
U
LT
=0.4~0.6W/(m
2
.)
2.Low coefficient of heat loss
3.Good performance & price
4.15years warranty
Structure
All-glass double-tube co-axial structure
Glass material
High borosilicate 3.3 glass
External pip diameter and thickness
Φ=47±1.0mm§=1.6mm±0.2mm
Φ=58±1.0mm§=1.8mm±0.2mm
Φ=70±1.5mm§=2.2mm±0.3mm
Internal pip diameter and thickness
Φ=37±0.8mm§=1.4mm±0.2mm
Φ=47±1.0mm§=1.6mm±0.2mm
Φ=58±1.0mm§=1.8mm±0.2mm
Pipe length
950mm 1500mm 1600mm 1700mm
1800mm 1900mm 2000mm 2100mm
Absorptive coating property
Structure
Cu/SS-ALN(H)/SS-ALN(L)/ALN
Sediment method
3 target magnetron sputtering plating
Specific absorption
A
s
=0.93~0.96 (AM1.5)
Emission ratio
ε
h
=0.04~0.06 (80±5)
Vacuum tightness
P≤5.0×10
-3
Pa
Idle sunning property parameters
Y=260~300 m
2
.C/KW
Solar irradiation for obtaining a preset water temperature
H≤4.7MJ/m
2
(Φ58)
H=3.7~4.2 MJ/m
2
H≤3.7MJ/m
2
(Φ47)
H=2.9~3.2 MJ/m
2
Average heat loss coefficient
U
LT
=0.4~0.6W/(m
2
.)
1000W Wind Solar Charger Controller
1.1000W Wind Solar Charger Controller
2.new hybrid controller .
3.CE.ROSH
4.2 Years warr
1.1000W Wind Solar Charger Controller
2.new hybrid controller
3.CE.ROSH
4.2 Years warr
Model
SPWS1000-24
SPWS1000-48
Rated Wind Turbine Power
1kW
Rated Solar Power
300W
Rated Battery Voltage
24V
48V
Wind Turbine Maximum Input Current
60A
30A
Wind Turbine Maximum Input Power
1.5kW
Unload Voltage(factory default/FONT>
28V
56V
Unload Current(factory default/FONT>
50A
25A
Control Mode
PWM
Display Mode
LCD
Display Parameters
Wind Turbine Power,Wind Turbine Voltage,Wind Turbine Current,
PV Voltage,PV Charge Current,PV Power,Battery Voltage.Etc
Working Temperature & Humidity
-20~+5535~85%RH(Without Condensation/FONT>
Protection Function
Solar reverse-charging protection , solar reverse-connection protection,
battery over charge protection,battery over-discharge protection,
battery reverse-connection protection, lightning protecting,
wind turbine current limitting, wind turbine automatic brake and manual brake.
In order to serve our customers better.Our company can adjust parameters configuration according to customer’s requirement.
2.new hybrid controller .
3.CE.ROSH
4.2 Years warr
1.1000W Wind Solar Charger Controller
2.new hybrid controller
3.CE.ROSH
4.2 Years warr
Model
SPWS1000-24
SPWS1000-48
Rated Wind Turbine Power
1kW
Rated Solar Power
300W
Rated Battery Voltage
24V
48V
Wind Turbine Maximum Input Current
60A
30A
Wind Turbine Maximum Input Power
1.5kW
Unload Voltage(factory default/FONT>
28V
56V
Unload Current(factory default/FONT>
50A
25A
Control Mode
PWM
Display Mode
LCD
Display Parameters
Wind Turbine Power,Wind Turbine Voltage,Wind Turbine Current,
PV Voltage,PV Charge Current,PV Power,Battery Voltage.Etc
Working Temperature & Humidity
-20~+5535~85%RH(Without Condensation/FONT>
Protection Function
Solar reverse-charging protection , solar reverse-connection protection,
battery over charge protection,battery over-discharge protection,
battery reverse-connection protection, lightning protecting,
wind turbine current limitting, wind turbine automatic brake and manual brake.
In order to serve our customers better.Our company can adjust parameters configuration according to customer’s requirement.
2000mAh/ 7.4Wh solar battery charger for Mobile Phone, PDA,iPone iPod,PSP,NDSL...
solar battery charger
1.Capacity: 2000mAh/ 7.4Wh
2.Input: Mini USB 5V/500mA
3.Solar Charger: 5V/150mA
solar battery charger
Model
MP-S2000
Color
Sliver/Black
Features
1)Solar Charger for mobile phone;
2)5 Blue LEDs indicate the Cap,Press the button to display battery power.
3)It can be full charged by solar energy with strong light about in 13 to 14 hours,
4)If charged by charger,first LED will be flicker,and LEDs will turn off when it is full charged.
Spec
1. Battery Type: Li-Po
2. Capacity: 2000mAh/ 7.4Wh
3. Input: Mini USB 5V/500mA;
Solar Charger: 5V/150mA,
4. Output: USB 5V/500mAh
5. 110*60*12mm
6. 130g.
7.With Blister Packing.
Fits for Mobile Phone, PDA,iPone iPod,PSP,NDSL...
Standard Accessories
1)12 PCS mobile phone connectors (M01 to M12)
2)1 USB spiral cable.
Optional Accessories
1)TF-Mult10-MB.
Warrenty 1 year
EMS, DHL, UPS, TNT or any other express you required can be accept by ours
Approval of CE, FCC, ROHS certification
Your inquiry will be highly appreciated by ours.
1.Capacity: 2000mAh/ 7.4Wh
2.Input: Mini USB 5V/500mA
3.Solar Charger: 5V/150mA
solar battery charger
Model
MP-S2000
Color
Sliver/Black
Features
1)Solar Charger for mobile phone;
2)5 Blue LEDs indicate the Cap,Press the button to display battery power.
3)It can be full charged by solar energy with strong light about in 13 to 14 hours,
4)If charged by charger,first LED will be flicker,and LEDs will turn off when it is full charged.
Spec
1. Battery Type: Li-Po
2. Capacity: 2000mAh/ 7.4Wh
3. Input: Mini USB 5V/500mA;
Solar Charger: 5V/150mA,
4. Output: USB 5V/500mAh
5. 110*60*12mm
6. 130g.
7.With Blister Packing.
Fits for Mobile Phone, PDA,iPone iPod,PSP,NDSL...
Standard Accessories
1)12 PCS mobile phone connectors (M01 to M12)
2)1 USB spiral cable.
Optional Accessories
1)TF-Mult10-MB.
Warrenty 1 year
EMS, DHL, UPS, TNT or any other express you required can be accept by ours
Approval of CE, FCC, ROHS certification
Your inquiry will be highly appreciated by ours.
single crystalline sillicon cz wafer
(1)silicon wafer , 125mm
(2)silicon wafer , 156mm
(3)we have 10 442D and 10 PV-1000 machine .
(4) we can supply about 800w
Zhejiang jinghao new energy co.,ltd was build on 2010, we have two company , 1 company mainly produce single or monocrystalline silicon wafer , 1 is produce solar wafer , and solar panel . we have advantage technology standard.
we now can produce about 800,0000 pics silicon wafer per month , and welcome all friends come to our factory . and have a meeting .
thanks
regards
joseph
(2)silicon wafer , 156mm
(3)we have 10 442D and 10 PV-1000 machine .
(4) we can supply about 800w
Zhejiang jinghao new energy co.,ltd was build on 2010, we have two company , 1 company mainly produce single or monocrystalline silicon wafer , 1 is produce solar wafer , and solar panel . we have advantage technology standard.
we now can produce about 800,0000 pics silicon wafer per month , and welcome all friends come to our factory . and have a meeting .
thanks
regards
joseph
single pole array solar rack
The single pole array system usually apply for grid solar power plant,the wind load is 55m/s.
Description
The single pole array system usually apply for grid solar power plant, the significant feature of system is that the cost of the installation is very efficient, for the simple structure of itself, and it is reliable , the wind load is 55m/s.
Widely range of application
The single pole array system fits various geology environment, includes the ground with gravel.
Cost efficiency of installation
For the simple structure of itself , it is easy to install , and because with the single pole, it will save a lot of time to fix the base of the system.
Reliable
The structure is a reversed triangle, which make the pressure concentrate on the pole , them improve the wind load of the hole system.
.
Description
The single pole array system usually apply for grid solar power plant, the significant feature of system is that the cost of the installation is very efficient, for the simple structure of itself, and it is reliable , the wind load is 55m/s.
Widely range of application
The single pole array system fits various geology environment, includes the ground with gravel.
Cost efficiency of installation
For the simple structure of itself , it is easy to install , and because with the single pole, it will save a lot of time to fix the base of the system.
Reliable
The structure is a reversed triangle, which make the pressure concentrate on the pole , them improve the wind load of the hole system.
.
Friday, March 18, 2011
single target solar vacuum tube(blue)
1.Standard 3.3 high-boron-silicon glass-pipe
2.Low coefficient of heat loss
3.Good performance & price
4.15years warra
Structure
All-glass double-tube co-axial structure
Glass material
High borosilicate 3.3 glass
External pip diameter and thickness
Φ=47±1.0mm§=1.6mm±0.2mm
Φ=58±1.0mm§=1.8mm±0.2mm
Φ=70±1.5mm§=2.2mm±0.3mm
Internal pip diameter and thickness
Φ=37±0.8mm§=1.4mm±0.2mm
Φ=47±1.0mm§=1.6mm±0.2mm
Φ=58±1.0mm§=1.8mm±0.2mm
Pipe length
950mm 1500mm 1600mm 1700mm
1800mm 1900mm 2000mm 2100mm
Absorptive coating property
Structure
Cu/SS-ALN(H)/SS-ALN(L)/ALN
Sediment method
3 target magnetron sputtering plating
Specific absorption
A
s
=0.93~0.96 (AM1.5)
Emission ratio
ε
h
=0.04~0.06 (80±5)
Vacuum tightness
P≤5.0×10
-3
Pa
Idle sunning property parameters
Y=260~300 m
2
.C/KW
Solar irradiation for obtaining a preset water temperature
H≤4.7MJ/m
2
(Φ58)
H=3.7~4.2 MJ/m
2
H≤3.7MJ/m
2
(Φ47)
H=2.9~3.2 MJ/m
2
Average heat loss coefficient
U
LT
=0.4~0.6W/(m
2
.)
2.Low coefficient of heat loss
3.Good performance & price
4.15years warra
Structure
All-glass double-tube co-axial structure
Glass material
High borosilicate 3.3 glass
External pip diameter and thickness
Φ=47±1.0mm§=1.6mm±0.2mm
Φ=58±1.0mm§=1.8mm±0.2mm
Φ=70±1.5mm§=2.2mm±0.3mm
Internal pip diameter and thickness
Φ=37±0.8mm§=1.4mm±0.2mm
Φ=47±1.0mm§=1.6mm±0.2mm
Φ=58±1.0mm§=1.8mm±0.2mm
Pipe length
950mm 1500mm 1600mm 1700mm
1800mm 1900mm 2000mm 2100mm
Absorptive coating property
Structure
Cu/SS-ALN(H)/SS-ALN(L)/ALN
Sediment method
3 target magnetron sputtering plating
Specific absorption
A
s
=0.93~0.96 (AM1.5)
Emission ratio
ε
h
=0.04~0.06 (80±5)
Vacuum tightness
P≤5.0×10
-3
Pa
Idle sunning property parameters
Y=260~300 m
2
.C/KW
Solar irradiation for obtaining a preset water temperature
H≤4.7MJ/m
2
(Φ58)
H=3.7~4.2 MJ/m
2
H≤3.7MJ/m
2
(Φ47)
H=2.9~3.2 MJ/m
2
Average heat loss coefficient
U
LT
=0.4~0.6W/(m
2
.)
small solar kits
1. This system inlcuded solar panel,bracket, LED lights,battery,cables etc.
2. Charge mobile by USB directly .
3. Ready to use
2. Charge mobile by USB directly .
3. Ready to use
small solar lighting system for home/ 2w solar home system for lighting
small solar lighting system
easy to use, compact,portable
small solar lighting system
Specification
1. Solar Panel: 2.2w
2. Battery: 3pcs 1.2v/1800mAh Ni-MH rechargeable battery
3. Lighting Source: 2pc 1w LED bulb
4. Charging Time:6-8 hours under sunlight
5. Working Time: 5-6 hours for full charge batteries for 2pcs bulb
Packing
Box Size: 235 x 95 x 165mm, 1pc /box
Carton Size: 520 x 500 x 350mm, 20pc /carton
Carton G.W: 18kgs
20'ft: 6200pcs
40'ft: 13000pcs
Feature
a. Portable; easy to install; an alternative power solution for areas short of public grid;
b. A universal solar power system for family, office, camping events, as well as field works
easy to use, compact,portable
small solar lighting system
Specification
1. Solar Panel: 2.2w
2. Battery: 3pcs 1.2v/1800mAh Ni-MH rechargeable battery
3. Lighting Source: 2pc 1w LED bulb
4. Charging Time:6-8 hours under sunlight
5. Working Time: 5-6 hours for full charge batteries for 2pcs bulb
Packing
Box Size: 235 x 95 x 165mm, 1pc /box
Carton Size: 520 x 500 x 350mm, 20pc /carton
Carton G.W: 18kgs
20'ft: 6200pcs
40'ft: 13000pcs
Feature
a. Portable; easy to install; an alternative power solution for areas short of public grid;
b. A universal solar power system for family, office, camping events, as well as field works
small solar panel 80w
small solar panel 80w
poly-crystalline solar module
small solar panel 80w
poly-crystalline solar
weight:1210*540*35mm
frame:anodized aluminium alloy
STC:Irradiance 1000w/m²,AM=1.5
poly-crystalline solar module
small solar panel 80w
poly-crystalline solar
weight:1210*540*35mm
frame:anodized aluminium alloy
STC:Irradiance 1000w/m²,AM=1.5
small solar panel and module TLNZ-MS10 --TUV CE BANKABLE
TLNZ-MS10 Solar panels are high efficiency with reasonable price.
Outstanding low-light performance.
TLNZ-MS10
SPECIFICATION
Model type
TLNZ-MS10
Peak power(Pmax)
10W
Weight
1.7kg (3.7lbs)
Dimensions
383×299×34mm
15.1×11.8×1.3inch
Maximum power voltage (Vmp)
17.82V
Maximum power current (Imp)
0.57A
Open circuit voltage (Voc)
21.96V
Short circuit current (Isc)
0.63A
Maximum system voltage
DC 1000V
Temp. Coeff. of Isc (TK Isc)
0.06%/
Temp. Coeff. of Voc (TK Voc)
-0.397%/
Temp. Coeff. of Pmax (TK Pmax)
-0.47%/
Normal Operating Cell Temperature
44.4±2
Outstanding low-light performance.
TLNZ-MS10
SPECIFICATION
Model type
TLNZ-MS10
Peak power(Pmax)
10W
Weight
1.7kg (3.7lbs)
Dimensions
383×299×34mm
15.1×11.8×1.3inch
Maximum power voltage (Vmp)
17.82V
Maximum power current (Imp)
0.57A
Open circuit voltage (Voc)
21.96V
Short circuit current (Isc)
0.63A
Maximum system voltage
DC 1000V
Temp. Coeff. of Isc (TK Isc)
0.06%/
Temp. Coeff. of Voc (TK Voc)
-0.397%/
Temp. Coeff. of Pmax (TK Pmax)
-0.47%/
Normal Operating Cell Temperature
44.4±2
small solar panel--TUV CE BANKABLE
TLNZ Solar panels are high efficiency with reasonable price.
Outstanding low-light performance.
TLNZ-MS10
SPECIFICATION
Model type
TLNZ-MS10
Peak power(Pmax)
10W
Weight
1.7kg (3.7lbs)
Dimensions
383×299×34mm
15.1×11.8×1.3inch
Maximum power voltage (Vmp)
17.82V
Maximum power current (Imp)
0.57A
Open circuit voltage (Voc)
21.96V
Short circuit current (Isc)
0.63A
Maximum system voltage
DC 1000V
Temp. Coeff. of Isc (TK Isc)
0.06%/
Temp. Coeff. of Voc (TK Voc)
-0.397%/
Temp. Coeff. of Pmax (TK Pmax)
-0.47%/
Normal Operating Cell Temperature
44.4±2
Outstanding low-light performance.
TLNZ-MS10
SPECIFICATION
Model type
TLNZ-MS10
Peak power(Pmax)
10W
Weight
1.7kg (3.7lbs)
Dimensions
383×299×34mm
15.1×11.8×1.3inch
Maximum power voltage (Vmp)
17.82V
Maximum power current (Imp)
0.57A
Open circuit voltage (Voc)
21.96V
Short circuit current (Isc)
0.63A
Maximum system voltage
DC 1000V
Temp. Coeff. of Isc (TK Isc)
0.06%/
Temp. Coeff. of Voc (TK Voc)
-0.397%/
Temp. Coeff. of Pmax (TK Pmax)
-0.47%/
Normal Operating Cell Temperature
44.4±2
small solar system
The system consists of the solar panel, solar controller battery inside) and electrical components. portable.convenient.
The TYP2 system has four types, the tail code of 05, 10, 40 respectively means 5W, 10W, 40W.
The controller parameters:
1) Power output interface: 3 DC 12V-0.15A/0.3A/1A interfaces (two interfaces can be remote controlled), 1 DC 5V-0.2A/0.5A/1A USB interface.
2) Charging input interface: one DC12V changing interface (solar panel or charging adapter can be connected).
3) Build-in radio and the audio output: build-in radio speaker 1W, FM 76~108MHz. 1 stereo audio output: can be connected to headphones, amplifiers. The speaker and the audio output can be switched automatically.
4) Internal battery: 12V, 2.6Ah/5Ah/15Ah (corresponding to 5W/10W/40W).
5) Dimensions L×W×H, mm):240×160×91(5W, 10W) 240×160×120(40W).
The accessory parameters
1) Solar panel: 18V, 5W/10W/40W.
2) charging adapter: input AC110~220V,output 12V-10A.
3) Two lights: 12V, 1.5W.
4) Fan: 12V, 2.5W.
5) Remote control: four buttons.
Caution
1) The solar panel should be charged 8~10 hours in direct sunshine before first using.
2) Stored in a dry environment, away from children.
3) The controller’s working temperature is 0°C~+50°C.
4) The controller’s storage temperature is -15°C~+55°C.
Common fault and solution
fault
possible reason
solution
Battery is not charging
1.Solar panel is properly connected
2.Charging adapter is properly connected
1.Check the solar panel
2.Check the charging adapter
Load does not work
1. Voltage is too low.
2. Load short-circuit occurs.
3. Load is overload.
1.Charging immediately, and then connect the load
2.Solve the short-circuit fault
3.Reduce the load power
Battery has no power in a short time
1. Charging time is insufficient.
2. Battery has aged or damaged.
1. Prolong the charging time
2. Change the battery.
The TYP2 system has four types, the tail code of 05, 10, 40 respectively means 5W, 10W, 40W.
The controller parameters:
1) Power output interface: 3 DC 12V-0.15A/0.3A/1A interfaces (two interfaces can be remote controlled), 1 DC 5V-0.2A/0.5A/1A USB interface.
2) Charging input interface: one DC12V changing interface (solar panel or charging adapter can be connected).
3) Build-in radio and the audio output: build-in radio speaker 1W, FM 76~108MHz. 1 stereo audio output: can be connected to headphones, amplifiers. The speaker and the audio output can be switched automatically.
4) Internal battery: 12V, 2.6Ah/5Ah/15Ah (corresponding to 5W/10W/40W).
5) Dimensions L×W×H, mm):240×160×91(5W, 10W) 240×160×120(40W).
The accessory parameters
1) Solar panel: 18V, 5W/10W/40W.
2) charging adapter: input AC110~220V,output 12V-10A.
3) Two lights: 12V, 1.5W.
4) Fan: 12V, 2.5W.
5) Remote control: four buttons.
Caution
1) The solar panel should be charged 8~10 hours in direct sunshine before first using.
2) Stored in a dry environment, away from children.
3) The controller’s working temperature is 0°C~+50°C.
4) The controller’s storage temperature is -15°C~+55°C.
Common fault and solution
fault
possible reason
solution
Battery is not charging
1.Solar panel is properly connected
2.Charging adapter is properly connected
1.Check the solar panel
2.Check the charging adapter
Load does not work
1. Voltage is too low.
2. Load short-circuit occurs.
3. Load is overload.
1.Charging immediately, and then connect the load
2.Solve the short-circuit fault
3.Reduce the load power
Battery has no power in a short time
1. Charging time is insufficient.
2. Battery has aged or damaged.
1. Prolong the charging time
2. Change the battery.
smart and mini solar charger
smart and mini solar charger
1. slide in/out built-in USB plug
2. Key chain for hanging.
3. Can add flash memory
smart and mini solar charger
USB solar power charger
, A super slim portable solar charger with a LCD srcreen ,show all status of charging&discharging and battery power;
slide in/out built-in USB plug
supply 2 hours talking time to cellphone;
super slim body: only 14mm;
Key chain for hanging;
Can Charge Iphone,3G,3GS ,Cellphones,PSP,MP3/MP4,PDA,GPS etc by adaptors.
Can be as a USB flash, 1G,2G,...for choice
Feature & Functions:
1. Solar Panel (mono or multi-crystalline): 5.5V / 45mA
2. Li-ion rechargeable Battery: 3.7V 600mAh
3. Smart protection chip:over-charging protection, over-discharge protection, overload protection, short circuit protection and low battery warning.
4. Super long lifespan: more than 500cycles of charge&discharge circle.
5. You can choose right connectors freely for your devices.
Main parameters:
Charging time by AC-DC adapter(5.5V 500mA)
2Hrs
Charging time by PC USB port(5V 500mA)
2Hrs
Charging time under sunlight(1000W/m
2
)
12Hrs
Max.current by solar(1000W/m
2
)
45mA
Max.load current
350mA
Running time for a fully charged product:
Mobile phone standby time
36Hrs
mobile phone talking time
1.8Hrs
PSP/DS lite
2.4Hrs
PDA
18Hrs
Navigation
1.2 to 1.8Hrs
Camera:
360imgs
1. slide in/out built-in USB plug
2. Key chain for hanging.
3. Can add flash memory
smart and mini solar charger
USB solar power charger
, A super slim portable solar charger with a LCD srcreen ,show all status of charging&discharging and battery power;
slide in/out built-in USB plug
supply 2 hours talking time to cellphone;
super slim body: only 14mm;
Key chain for hanging;
Can Charge Iphone,3G,3GS ,Cellphones,PSP,MP3/MP4,PDA,GPS etc by adaptors.
Can be as a USB flash, 1G,2G,...for choice
Feature & Functions:
1. Solar Panel (mono or multi-crystalline): 5.5V / 45mA
2. Li-ion rechargeable Battery: 3.7V 600mAh
3. Smart protection chip:over-charging protection, over-discharge protection, overload protection, short circuit protection and low battery warning.
4. Super long lifespan: more than 500cycles of charge&discharge circle.
5. You can choose right connectors freely for your devices.
Main parameters:
Charging time by AC-DC adapter(5.5V 500mA)
2Hrs
Charging time by PC USB port(5V 500mA)
2Hrs
Charging time under sunlight(1000W/m
2
)
12Hrs
Max.current by solar(1000W/m
2
)
45mA
Max.load current
350mA
Running time for a fully charged product:
Mobile phone standby time
36Hrs
mobile phone talking time
1.8Hrs
PSP/DS lite
2.4Hrs
PDA
18Hrs
Navigation
1.2 to 1.8Hrs
Camera:
360imgs
2000w pv solar system
1)solar system module:10pcs 200w
2)solar storage battery:24*2V500AH
3)competitive price
Accessories name
specifications
parameter
quantity
solar control system
Output Voltage
AC110/230V
solar control system
Controller
48V50A*6
1pcs
solar control system
Inverter
48V3000W
1pcs
solar system have 1set solar panel frame,solar panel wiring
the features of solar power system are as follows:
1)Safe and reliable.
2)Long service life.
3)Continuous and reliable power supply.
4)Green, low carbon economy. All energy from nature, no noise during operation and pollution emissions, lead crystal with high energy storage batteries, no acid and acid mist spills can be safe to use indoors.
2)solar storage battery:24*2V500AH
3)competitive price
Accessories name
specifications
parameter
quantity
solar control system
Output Voltage
AC110/230V
solar control system
Controller
48V50A*6
1pcs
solar control system
Inverter
48V3000W
1pcs
solar system have 1set solar panel frame,solar panel wiring
the features of solar power system are as follows:
1)Safe and reliable.
2)Long service life.
3)Continuous and reliable power supply.
4)Green, low carbon economy. All energy from nature, no noise during operation and pollution emissions, lead crystal with high energy storage batteries, no acid and acid mist spills can be safe to use indoors.
snail solar resin light
solar resin light
made of polyresin,10.2x6x8.5cm;
solar power,easy install,environmental friendly;
competitive price
Solar resin Light
Model No
BKD650
Des.of Goods
Solar snail string light
Solar Module
Monocrystalline / Polycrystalline
Solar Panel
2v 35mA
Battery
1pc 1.2v 600mAh Ni-Mh rechargeable battery
Light Source
Bright LED 3pcs
Led Color
White color(to be optional)
Working Time
up to 8 hours after fully charged
Product size(LWH)
10.2x6x8.5cm
Package
polyfoam with white box/mail order box/color box
Material
polyresin
Standard
CE & RoHs
MOQ
1000pcs
made of polyresin,10.2x6x8.5cm;
solar power,easy install,environmental friendly;
competitive price
Solar resin Light
Model No
BKD650
Des.of Goods
Solar snail string light
Solar Module
Monocrystalline / Polycrystalline
Solar Panel
2v 35mA
Battery
1pc 1.2v 600mAh Ni-Mh rechargeable battery
Light Source
Bright LED 3pcs
Led Color
White color(to be optional)
Working Time
up to 8 hours after fully charged
Product size(LWH)
10.2x6x8.5cm
Package
polyfoam with white box/mail order box/color box
Material
polyresin
Standard
CE & RoHs
MOQ
1000pcs
soalr lamp indoor family
1.Battery:4.0V/1.0AH in bulbo LED:60pcs.
2.Solar panel 10w 6v.can for 5pes bulbo
3.charging time 6h
4.fob shanghai usd $76
1.When operating the light is suddenly dim,that the circuit over-discharging prevented to damage battery.please recharged the battery at once. 2.The lantern must be recharged at least 8 hours ecery three months. 3.When not in use,please switch off the light. 4.Do not use or place the unit near water. 5.The efficiency may decrease if lantem is used or charged when temperature is below 32f(0°C) or above 104f(40°C). 6.The thread mount and soket of this product can be used together.
2.Solar panel 10w 6v.can for 5pes bulbo
3.charging time 6h
4.fob shanghai usd $76
1.When operating the light is suddenly dim,that the circuit over-discharging prevented to damage battery.please recharged the battery at once. 2.The lantern must be recharged at least 8 hours ecery three months. 3.When not in use,please switch off the light. 4.Do not use or place the unit near water. 5.The efficiency may decrease if lantem is used or charged when temperature is below 32f(0°C) or above 104f(40°C). 6.The thread mount and soket of this product can be used together.
soalr panel
1. polycrystalline solar Panel
2. TUV, CE, UL ,VDE , Goldern Sun certification
3.205W
Item No. Tonsum-205
parameters:
Peak power(pm): 205W
Tolerance: +/- 3%
Open Circuit Voltage(Voc):33.94V
short Circuit Current (ISC):8.85A
Maximum Power Voltage (Vmp):26.83V
Maximum Power Current (Imp):7.65A
Maximum system Voltage: 1000VDC
Dimension (mm):1480*992*50mm
Weight (kg):17.8KGz
Cell series: 54(156*156mm)
Typical data under standard Test Condition (STC): AM.5, 25 degree, 1000W/M
2
2. TUV, CE, UL ,VDE , Goldern Sun certification
3.205W
Item No. Tonsum-205
parameters:
Peak power(pm): 205W
Tolerance: +/- 3%
Open Circuit Voltage(Voc):33.94V
short Circuit Current (ISC):8.85A
Maximum Power Voltage (Vmp):26.83V
Maximum Power Current (Imp):7.65A
Maximum system Voltage: 1000VDC
Dimension (mm):1480*992*50mm
Weight (kg):17.8KGz
Cell series: 54(156*156mm)
Typical data under standard Test Condition (STC): AM.5, 25 degree, 1000W/M
2
soalr pv roof mounting solar bracket low cost
wanter-resistance.
available request.
simple installation.
customize design
Solar tracking system, Solar tracker, Solar power grid system, Solar pv modules, Solar power generator, Sun tracker
A..The end-user will prefer the dual tracking solution rather than a fixed ground system because:
· The efficiency increases by 30-40% (= more money)
· The space requirement for a solar park is reduced, and they keep the same output
· The return of the investment timeline is reduced
· The tracking system amortises itself within 4 years (on average)
B..Single axis tracking system.
Tracking the sun from east in the morning to west in the evening will increase the efficiency of the solar panel by 2062% depending on whom you ask and where you are in the world.
Near the equator, you will have the highest benefit of tracking the sun.
Our business proposal is to offer a complete linear actuator system that moves your tracking base according to the sun.
We catch the sun and increase the output of the solar panel.
C..Efficiency
By tracking the sun the efficiency can be increased by 30-40%.
D..Quality
At Sunnertech, we manufacture quality products. We aim at being the leading manufacturer in the business, having a world class production.
That is why we work according to the Sunnertech principles in all aspects of our production processes.
This practice ensures high-quality products, services and deliveries.
available request.
simple installation.
customize design
Solar tracking system, Solar tracker, Solar power grid system, Solar pv modules, Solar power generator, Sun tracker
A..The end-user will prefer the dual tracking solution rather than a fixed ground system because:
· The efficiency increases by 30-40% (= more money)
· The space requirement for a solar park is reduced, and they keep the same output
· The return of the investment timeline is reduced
· The tracking system amortises itself within 4 years (on average)
B..Single axis tracking system.
Tracking the sun from east in the morning to west in the evening will increase the efficiency of the solar panel by 2062% depending on whom you ask and where you are in the world.
Near the equator, you will have the highest benefit of tracking the sun.
Our business proposal is to offer a complete linear actuator system that moves your tracking base according to the sun.
We catch the sun and increase the output of the solar panel.
C..Efficiency
By tracking the sun the efficiency can be increased by 30-40%.
D..Quality
At Sunnertech, we manufacture quality products. We aim at being the leading manufacturer in the business, having a world class production.
That is why we work according to the Sunnertech principles in all aspects of our production processes.
This practice ensures high-quality products, services and deliveries.
solar charger
High power solar charger
Solar charger for notebook
Good solar battery charger
OEM ODM service
CE,RoHS,FCC approved
Product surface spraying rubber oil Richard, the appearance of high-grade beautiful. Built-in 12000mAh or 16000mAh high capacity of the battery,Output voltage can be adjusted for 5V/9V/12V/16/19,Can be used for mobile phone or laptop emergency charging.
Function:
(
1
).
High transfered solar pannel
,
solar energy transfer efficiency:>16%.
(
2
).
solar pannel size:
18V/50mA.
(
3
).
capacity of built-in battery:12000mAh or 16000mAh.
(
4
).
out-put voltage:
5V.9V.12V.16V.19V.
(
5
).
out-put current:1
000
mA.2A.4A.
(6).charging time for AC power or computer to built-in battery :5 hours.
(7).charging time for solar energy to built-in battery:80~100 hours.
(8).suitale for:mobilephones,digital camera,MP3,MP4,PSP etc,cover 90% of digital products.
Accessory:
1.solar charger :
1PCS
2.output line:2
PC
3.tips:28PCS
4.AC input line:
1PC
5.AC adapter:1PC
6.manual
Solar charger for notebook
Good solar battery charger
OEM ODM service
CE,RoHS,FCC approved
Product surface spraying rubber oil Richard, the appearance of high-grade beautiful. Built-in 12000mAh or 16000mAh high capacity of the battery,Output voltage can be adjusted for 5V/9V/12V/16/19,Can be used for mobile phone or laptop emergency charging.
Function:
(
1
).
High transfered solar pannel
,
solar energy transfer efficiency:>16%.
(
2
).
solar pannel size:
18V/50mA.
(
3
).
capacity of built-in battery:12000mAh or 16000mAh.
(
4
).
out-put voltage:
5V.9V.12V.16V.19V.
(
5
).
out-put current:1
000
mA.2A.4A.
(6).charging time for AC power or computer to built-in battery :5 hours.
(7).charging time for solar energy to built-in battery:80~100 hours.
(8).suitale for:mobilephones,digital camera,MP3,MP4,PSP etc,cover 90% of digital products.
Accessory:
1.solar charger :
1PCS
2.output line:2
PC
3.tips:28PCS
4.AC input line:
1PC
5.AC adapter:1PC
6.manual
solar collector
heat pipe solar collector have very good performance for all the zones, even if in cold area.
The pipeline is made of all the red copper and conducted by heattransfer medium liquid. Water can not flow in vacuum tubes and operatedwhen confined, the frame uses galvanized steel sheet, with very highstrength.
Canwithstand high pressure when is work. Module design, arbitrarycombination, which can meet the demand of large water consumption.
This products is a sperated part from the split and pressurized solar water heatersystems. The quantity of the tube is optional for different capacity of tank.
Youare welcome for more informations about it.
The pipeline is made of all the red copper and conducted by heattransfer medium liquid. Water can not flow in vacuum tubes and operatedwhen confined, the frame uses galvanized steel sheet, with very highstrength.
Canwithstand high pressure when is work. Module design, arbitrarycombination, which can meet the demand of large water consumption.
This products is a sperated part from the split and pressurized solar water heatersystems. The quantity of the tube is optional for different capacity of tank.
Youare welcome for more informations about it.
solar collector
solar collector
Reliable,efficient,twin-glass solar tubes heat pipe
Copper heat pipes for rapid heat transfer
Corrosion resi
Reliable,efficient,twin-glass solar tubes heat pipe
Copper heat pipes for rapid heat transfer
Corrosion resi
solar connector
solar connector for MC4 PV system
TUV approved
material anti-aging,
UV resistant,
flam retardant
solar connector for MC4 PV system
Rated voltage:1000VDC
Rated impulse voltage:8000V
Rated insulation voltage: 6000V
Rated Curren:16A
Protection Class: Class ∏
Pollution degree: 2
Over voltage category:ΙΙΙ
Lower ambient temperature: -40°C
Upper ambient temperature: +85°C
Upper limit Temperature: 100°C
Type of conductor: Flexible
Values for cable clamp: 6.1±0.1mm
Number of poles: 1
Wire cross section area or cross section range: 1*2.5 4.0 mm2
Degree of protection): IP65
Standard: DIN V VDE V 0126-3/12.06
TUV approved
material anti-aging,
UV resistant,
flam retardant
solar connector for MC4 PV system
Rated voltage:1000VDC
Rated impulse voltage:8000V
Rated insulation voltage: 6000V
Rated Curren:16A
Protection Class: Class ∏
Pollution degree: 2
Over voltage category:ΙΙΙ
Lower ambient temperature: -40°C
Upper ambient temperature: +85°C
Upper limit Temperature: 100°C
Type of conductor: Flexible
Values for cable clamp: 6.1±0.1mm
Number of poles: 1
Wire cross section area or cross section range: 1*2.5 4.0 mm2
Degree of protection): IP65
Standard: DIN V VDE V 0126-3/12.06
solar energy tube well
Excellent resistance,corrosion
Keeping water clean
Excellent performance of absorbing
CE avaliable
The specification of the product
name
47*1500mm
58*1800mm
Air drying performance parameters
≥190 m2*°C/kW
≥190 m2*°C/kW
Stuffy sun radiation exposure
≤3.7MJ/ m2
≤4.7MJ/ m2
Average heat loss coefficient
≤0.85w/ (m2*°C)
≤0.85w/ (m2*°C)
Vacuum performance
≤5×10-2pa
≤5×10-2pa
Pressure
0.6MPa
0.6MPa
Heat shock
0 °C ice water resistant to three ≥ 90 °C hot water and the impact of a
lternate
Impact
Anti-30mm ball falling from a 450mm high vertical
Air drying temperature
>250°C
>250°C
Absorption rate
>92%
>92%
Emissivity
≤8%
≤8%
Freezing
>-40°C
>-40°C
Weight(kg)
≥1.3
≥2.0
Volume(L)
1.3
2.7
Length Tolerance(mm)
±7.5
±9
Outer tube diameter(mm)
47±0.7
58±0.7
Outer tube wall thickness(mm)
1.6±0.15
1.6±0.15
This is the number of the pipe put the container.
Container
Size
quantity
20’GP
47*1500
4700PCS
58*1800
2400PCS
40’GP
47*1500
9500PCS
58*1800
4900PCS
40’HC
47*1500
11400PCS
58*1800
5880PCS
Product feature :
1
Coating time is the most important part of solar vacuum tubes, our product coating time for more than an hour, membrane layer thickness, high absorptivity. We use a vacuum magnetron sputtering film coating, it's advantage is the whole surface is evenly sputtering, improve the coating quality, make the film has a good selection of absorption, wear resistance, corrosion resistance sex.
2
Our products high vacuum degree, temperature of heating to 450 degrees Celsius, the air, keep out off vacuum, play a good heat preservation effect.
3
We use 304 solar spring clip next, can better support at the bottom of the tube, make the vacuum tube solar long service life. Our sealing even, no bubble, which uses a long time, also won't make internal and external pipe fall off. Make us the life span of the vacuum tube for as long as 15 years.
4
Our raw materials with 3.3 high-borosilicate glass which can resist impact from hail up to 30mm in diameter, high transmittance, heat-proof impinge good, optical strong stability
Keeping water clean
Excellent performance of absorbing
CE avaliable
The specification of the product
name
47*1500mm
58*1800mm
Air drying performance parameters
≥190 m2*°C/kW
≥190 m2*°C/kW
Stuffy sun radiation exposure
≤3.7MJ/ m2
≤4.7MJ/ m2
Average heat loss coefficient
≤0.85w/ (m2*°C)
≤0.85w/ (m2*°C)
Vacuum performance
≤5×10-2pa
≤5×10-2pa
Pressure
0.6MPa
0.6MPa
Heat shock
0 °C ice water resistant to three ≥ 90 °C hot water and the impact of a
lternate
Impact
Anti-30mm ball falling from a 450mm high vertical
Air drying temperature
>250°C
>250°C
Absorption rate
>92%
>92%
Emissivity
≤8%
≤8%
Freezing
>-40°C
>-40°C
Weight(kg)
≥1.3
≥2.0
Volume(L)
1.3
2.7
Length Tolerance(mm)
±7.5
±9
Outer tube diameter(mm)
47±0.7
58±0.7
Outer tube wall thickness(mm)
1.6±0.15
1.6±0.15
This is the number of the pipe put the container.
Container
Size
quantity
20’GP
47*1500
4700PCS
58*1800
2400PCS
40’GP
47*1500
9500PCS
58*1800
4900PCS
40’HC
47*1500
11400PCS
58*1800
5880PCS
Product feature :
1
Coating time is the most important part of solar vacuum tubes, our product coating time for more than an hour, membrane layer thickness, high absorptivity. We use a vacuum magnetron sputtering film coating, it's advantage is the whole surface is evenly sputtering, improve the coating quality, make the film has a good selection of absorption, wear resistance, corrosion resistance sex.
2
Our products high vacuum degree, temperature of heating to 450 degrees Celsius, the air, keep out off vacuum, play a good heat preservation effect.
3
We use 304 solar spring clip next, can better support at the bottom of the tube, make the vacuum tube solar long service life. Our sealing even, no bubble, which uses a long time, also won't make internal and external pipe fall off. Make us the life span of the vacuum tube for as long as 15 years.
4
Our raw materials with 3.3 high-borosilicate glass which can resist impact from hail up to 30mm in diameter, high transmittance, heat-proof impinge good, optical strong stability
solar floating water light with clear plastic ball
solar floating water light with clear plastic ball
1.Stainless steel body
2.plastic ball diffuser
3.IP67
4. round shape
solar floating water light with clear plastic ball
1.plastic ball diffuser
2.Mono-crystal solar panel,2v/40mAh
3.1*600mAh AA NI-MH 1.2V battery
4.Light on 6 hs after full recharge 5hs
5.Protection class :IP68
6.Could float on water
7.Use solar power,no need outer electric power,energy-saving,environment protection 8.CE&RoHS
12.No wiring needed, no electrical needed - Sunlight recharges internal batteries in day time
Specification
any direction. No wiring and no electrical install, automatically turns on at night and turns off in daylight.
Feature
1.Automatic turn on/off by light sensor:at dusk it turns on,in the day it turns off
2.Light always keep lighting
Application
swimming pool lighting ,house use , instead of traditional lighting
1.Stainless steel body
2.plastic ball diffuser
3.IP67
4. round shape
solar floating water light with clear plastic ball
1.plastic ball diffuser
2.Mono-crystal solar panel,2v/40mAh
3.1*600mAh AA NI-MH 1.2V battery
4.Light on 6 hs after full recharge 5hs
5.Protection class :IP68
6.Could float on water
7.Use solar power,no need outer electric power,energy-saving,environment protection 8.CE&RoHS
12.No wiring needed, no electrical needed - Sunlight recharges internal batteries in day time
Specification
any direction. No wiring and no electrical install, automatically turns on at night and turns off in daylight.
Feature
1.Automatic turn on/off by light sensor:at dusk it turns on,in the day it turns off
2.Light always keep lighting
Application
swimming pool lighting ,house use , instead of traditional lighting
200A Wind Turbine Charge Controller
1.Build In Rectifier
2.Build In Dump Load Controller
3.Build In High Wind Protection
4.12V/24V/36V Battery Auto-Sensing
Specification
This model controller is 12V/24V/36V Battery Auto-Sensing.
Battery Voltage
12V
24V
36V
Rated Charge Current
15A
7.5A
5A
Maximum Charge Voltage
14.4V
28.8V
43.2V
Dump Load Resistor
2 ohm/200W
8 ohm/200W
18 ohm/200W
High Wind Protection
Yes
(The controller will disconnect from wind turbine when wind Goes too high)
When the wind goes low, the controller will re-connect to turbine again)
Battery Reverse Protection
Yes
Short Circuit Protection
Yes
Overload Protection
Yes
Operating Temperature
-5°C -- 40°C
Control Method
PWM
When the Battery is connected to the Charge controller, the controller will detect the voltage of the battery first,
then it will decide how to charge the battery connected.
2.Build In Dump Load Controller
3.Build In High Wind Protection
4.12V/24V/36V Battery Auto-Sensing
Specification
This model controller is 12V/24V/36V Battery Auto-Sensing.
Battery Voltage
12V
24V
36V
Rated Charge Current
15A
7.5A
5A
Maximum Charge Voltage
14.4V
28.8V
43.2V
Dump Load Resistor
2 ohm/200W
8 ohm/200W
18 ohm/200W
High Wind Protection
Yes
(The controller will disconnect from wind turbine when wind Goes too high)
When the wind goes low, the controller will re-connect to turbine again)
Battery Reverse Protection
Yes
Short Circuit Protection
Yes
Overload Protection
Yes
Operating Temperature
-5°C -- 40°C
Control Method
PWM
When the Battery is connected to the Charge controller, the controller will detect the voltage of the battery first,
then it will decide how to charge the battery connected.
solar freezer
Solar freezer
DC & AC compressor
20L-928L
System:PV module,battrey,controller/inverter
solar freezer
DC & AC compressor
Input Voltage: DC 12V / 24V (Auto Select)
20-928L CAPACITY
System including pv module,battrey,controller/inverter
Inquiry by e-mail for details.
DC & AC compressor
20L-928L
System:PV module,battrey,controller/inverter
solar freezer
DC & AC compressor
Input Voltage: DC 12V / 24V (Auto Select)
20-928L CAPACITY
System including pv module,battrey,controller/inverter
Inquiry by e-mail for details.
solar heater collector
1.CE,ISO,CCC,SRCC, SOLAR KEYMARK certificate
2.only 7 days delivery time after receiving deposit
3.warranty: 5 years
Meida separated pressurized solar water heating system is one kind of indirect heat exchange and forced double-circulation system, which makes perfect combination with the building possible. The water tank can be installed conveniently, the solar collector tube is antirust, nonexplosive. The whole system is pressurized and can operate automatically in spite of all kinds of hard weather conditions.
1) The products use heat-pipe to transmit heat energy
2) Solar collector separates with the storage tank. The tank can be put anywhere of the house
3) Solar collector is combined with the building perfectly
4) The pipe is made of purple copper. The working substance flows in the pipe instead of water
5) Intelligent control and automatic operation
6) The insulation layer uses the up-to-date technology and has a good effect of temperature preservation
7) The equipment of separated pressurized solar water heater is composed of a solar collector, storage tank, expansion vessel, controller, working station and installation parts
8) Multifunction: water for bathing, washing, cooking and so on
2.only 7 days delivery time after receiving deposit
3.warranty: 5 years
Meida separated pressurized solar water heating system is one kind of indirect heat exchange and forced double-circulation system, which makes perfect combination with the building possible. The water tank can be installed conveniently, the solar collector tube is antirust, nonexplosive. The whole system is pressurized and can operate automatically in spite of all kinds of hard weather conditions.
1) The products use heat-pipe to transmit heat energy
2) Solar collector separates with the storage tank. The tank can be put anywhere of the house
3) Solar collector is combined with the building perfectly
4) The pipe is made of purple copper. The working substance flows in the pipe instead of water
5) Intelligent control and automatic operation
6) The insulation layer uses the up-to-date technology and has a good effect of temperature preservation
7) The equipment of separated pressurized solar water heater is composed of a solar collector, storage tank, expansion vessel, controller, working station and installation parts
8) Multifunction: water for bathing, washing, cooking and so on
solar jar
1have 2 visual effect:moon and sun
2also have 2 function:storage and decoration
3 perfect quality and sevices
1,charges during the day,lights at night
2,swith to the "NO1",you get a moon jar.swith to the "NO2",you get a sun jar
3,stores up candies,toys and other things
4,waterproof and thickened monza glas
1,sample supply
sample is available under the terms that sample cost and freight cost is paid by you , we will deduct the cost if has order formed following .
2,delivery time
Delivery date is depend on your order quantity , we will meet the promised date .
3
,
the unit price
Welcome to contact me any time to get the latest price .
2also have 2 function:storage and decoration
3 perfect quality and sevices
1,charges during the day,lights at night
2,swith to the "NO1",you get a moon jar.swith to the "NO2",you get a sun jar
3,stores up candies,toys and other things
4,waterproof and thickened monza glas
1,sample supply
sample is available under the terms that sample cost and freight cost is paid by you , we will deduct the cost if has order formed following .
2,delivery time
Delivery date is depend on your order quantity , we will meet the promised date .
3
,
the unit price
Welcome to contact me any time to get the latest price .
solar junction box with cable and pv connector ,pv waterprooof box ,SC-JB6 ,TUV certificate
1 TUV approved
2 Timely ship to worldwide
3 Safety,simply to installtion
4 Big power solar junction box
solar junction box with cable and pv connector ,pv waterprooof box ,SC-JB6 ,TUV certificate
———————————————————————————————
main parameter:
main parameter:
Insulation material: PPO
Rated current: 30A
Contactresistance: 0.4mΩ
Temperature range: -40ºC~+90ºC
Flame class: UL94-V0
Degree of protection: IP65
Safety class: II
Rated voltage: 1000V(TUV) 600V(UL)
Contactmaterial:Copper,tinplated
Pin dimension: Φ3.0mm Φ4.0mm
wire size range: 2.5~6.0mm²
Test voltage : 6KV (TUV5OHZ ,1min)
———————————————————————————————
Specialty:
With the capacity of anti-aging and anti-ultraviolet radiation;
To meet the using requirements under bad outdoor conditions;
TUV and UL standard;
Suitable for various connector (MC3,MC4);
Can meet different specifications of the cable ,and accept customized length of cable according to the customers requests;
Cable connection using riveting and confining means;
It can be put 2 to 4 pieces connectors as needed;
Self-locking structure of both inserting and fixed style is applied for the connection of cables;
Big inner capacity is better for emanating the heat;
It can contain 5&10 diodes, so it adapted to high power solar panel;
———————————————————————————————
Shippingment terms:
EMS, UPS, DHL, FedEx and TNT express shipping usually take 3-5 working days dependent on the country delivered to;
We are not responsible for any accidents, delays or other issues that are the responsibility of the shipping service;
In order to ensure you receive your order with tax free upon import, we will declare it as a "Gift" or "Sample" with a lower value but it does not reflect the total price you paid or the market value of the goods and may not workable in some countries with different tariff rules;
Any import charges or fees are on buyer's account;
———————————————————————————————
Attatching:
Accepts OEM. We also can design the cable according to your instructions, the color, specifications, length of our cables and connectors can be customized by the customers;
We can provide the cables as well as connectors linked with the cable;
We adpot select raw-materials, our products are in high quality, competitive prices, prompt delivery;
———————————————————————————————
External size:
Optional tools:
2 Timely ship to worldwide
3 Safety,simply to installtion
4 Big power solar junction box
solar junction box with cable and pv connector ,pv waterprooof box ,SC-JB6 ,TUV certificate
———————————————————————————————
main parameter:
main parameter:
Insulation material: PPO
Rated current: 30A
Contactresistance: 0.4mΩ
Temperature range: -40ºC~+90ºC
Flame class: UL94-V0
Degree of protection: IP65
Safety class: II
Rated voltage: 1000V(TUV) 600V(UL)
Contactmaterial:Copper,tinplated
Pin dimension: Φ3.0mm Φ4.0mm
wire size range: 2.5~6.0mm²
Test voltage : 6KV (TUV5OHZ ,1min)
———————————————————————————————
Specialty:
With the capacity of anti-aging and anti-ultraviolet radiation;
To meet the using requirements under bad outdoor conditions;
TUV and UL standard;
Suitable for various connector (MC3,MC4);
Can meet different specifications of the cable ,and accept customized length of cable according to the customers requests;
Cable connection using riveting and confining means;
It can be put 2 to 4 pieces connectors as needed;
Self-locking structure of both inserting and fixed style is applied for the connection of cables;
Big inner capacity is better for emanating the heat;
It can contain 5&10 diodes, so it adapted to high power solar panel;
———————————————————————————————
Shippingment terms:
EMS, UPS, DHL, FedEx and TNT express shipping usually take 3-5 working days dependent on the country delivered to;
We are not responsible for any accidents, delays or other issues that are the responsibility of the shipping service;
In order to ensure you receive your order with tax free upon import, we will declare it as a "Gift" or "Sample" with a lower value but it does not reflect the total price you paid or the market value of the goods and may not workable in some countries with different tariff rules;
Any import charges or fees are on buyer's account;
———————————————————————————————
Attatching:
Accepts OEM. We also can design the cable according to your instructions, the color, specifications, length of our cables and connectors can be customized by the customers;
We can provide the cables as well as connectors linked with the cable;
We adpot select raw-materials, our products are in high quality, competitive prices, prompt delivery;
———————————————————————————————
External size:
Optional tools:
solar keychain
3LED solar flashlight key chain
material:ABS
LED:3 pcs high brightness LED
Item:solar flashlight key chain
Unit size: 58(L)*38(W)*11(H)MM
Unit weight :16g
Material: plastic (ABS), with Rubberized finish/ or without
LED: 3pcs high-brightness LED
On/off switch:
side
Solar panel:
Amorphous silicon
No need to replace battery,Built-in 3.6v/40maH rechargeble Lithium battery.
Charged in the sun 6-8 hours,can last for 2-3
Packing: each pc in a bubble bag and put into a white box,then 100pcs in an inner box , and 500pcs in a outside carton,
MEAS: 54*35*22.5CM, G.W./N.W.: 12/11KGS
material:ABS
LED:3 pcs high brightness LED
Item:solar flashlight key chain
Unit size: 58(L)*38(W)*11(H)MM
Unit weight :16g
Material: plastic (ABS), with Rubberized finish/ or without
LED: 3pcs high-brightness LED
On/off switch:
side
Solar panel:
Amorphous silicon
No need to replace battery,Built-in 3.6v/40maH rechargeble Lithium battery.
Charged in the sun 6-8 hours,can last for 2-3
Packing: each pc in a bubble bag and put into a white box,then 100pcs in an inner box , and 500pcs in a outside carton,
MEAS: 54*35*22.5CM, G.W./N.W.: 12/11KGS
solar module with IEC/CE certificates
Solar module
1. Bankable,TUV,CE,UL,Kiers
2. 17.5% efficiency
3. complete value chain (capacity:300MW/year)
Solar module
Features:
1) Use of premium quality raw material from leading world-wide suppliers
2) Strict quality control and power classification of modules
3) Ready to use with junction box, cabling and connectors
4) Be resistant to atmospheric exposure and effects of delamination
Specifications:
1) Peak power (Wp): 185Wp
2) Max. power voltage (Vmp): 37.0V
3) Max. power current (Imp): 5.0A
4) Open circuit voltage (Voc): 44.6V
5) Short circuit current (Isc): 5.6A
6) Max. system voltage: DC 1000V
7) Dimensions: 1,582mm*809mm*50mm
Outer packing:
Carton
Pmax
160W
165W
170W
175W
180W
185W
Voc
43.4V
43.6V
44.2V
44.2V
44.2V
44.6V
Isc
5.09A
5.10A
5.15A
5.25A
5.36A
5.60A
Vmp
34.5V
35.4V
35.6V
35.8V
36.2V
37.0V
Imp
4.64A
4.66A
4.78A
4.89A
4.97A
5.00A
Tolerance
±3%
Fuse rating
10A
Maximum system voltage
DC1000V
Dimension
1582*809*50mm/1580*808*35mm
Cell type
125*125mm/72 mono-crystalline cells
Net weight
16.5KG
Mechanical load
5400Pa
NOCT
47±3°C
Operating temperature
-40 to 85°C
1. Bankable,TUV,CE,UL,Kiers
2. 17.5% efficiency
3. complete value chain (capacity:300MW/year)
Solar module
Features:
1) Use of premium quality raw material from leading world-wide suppliers
2) Strict quality control and power classification of modules
3) Ready to use with junction box, cabling and connectors
4) Be resistant to atmospheric exposure and effects of delamination
Specifications:
1) Peak power (Wp): 185Wp
2) Max. power voltage (Vmp): 37.0V
3) Max. power current (Imp): 5.0A
4) Open circuit voltage (Voc): 44.6V
5) Short circuit current (Isc): 5.6A
6) Max. system voltage: DC 1000V
7) Dimensions: 1,582mm*809mm*50mm
Outer packing:
Carton
Pmax
160W
165W
170W
175W
180W
185W
Voc
43.4V
43.6V
44.2V
44.2V
44.2V
44.6V
Isc
5.09A
5.10A
5.15A
5.25A
5.36A
5.60A
Vmp
34.5V
35.4V
35.6V
35.8V
36.2V
37.0V
Imp
4.64A
4.66A
4.78A
4.89A
4.97A
5.00A
Tolerance
±3%
Fuse rating
10A
Maximum system voltage
DC1000V
Dimension
1582*809*50mm/1580*808*35mm
Cell type
125*125mm/72 mono-crystalline cells
Net weight
16.5KG
Mechanical load
5400Pa
NOCT
47±3°C
Operating temperature
-40 to 85°C
solar panel waterproof connector,MC4 compatible pv connector .SC-P4AMF,TUV certificate
1 TUV certificate
2 Simple,quick installation
3 Timely shippment to worldwide
4 MC4 compatible solar panel connector
solar panel waterproof connector,MC4 compatible receptacle .SC-P4AMF,TUV certificate
Main parameter:
Main parameter
Rated current : 30A
Insulationg material: PPO
Ambient temperature range: -40~+90° C
Flame class: UL94-V0
Safety class: II
Shell Protection degree: IP67
Contact material: Copper,Ni Plated
Test voltage: 6KV(TUV50Hz.1min)
Insertion force: ≤ 50N
Withdrawal force: ≥ 50N
Contact resistence: 0.4mΩ
Test voltage: 6000V(TUV50Hz,1min)
Connecting System: Crimp connection
Pin dimensions: Φ4.0 mm
———————————————————————————————
Main Speciality:
With the capacity of anti-aging and anti-ultraviolet radiation;
To meet the using requirements under bad outdoor conditions;
Meet TUV and UL standard;
Suitable for various connector (MC3,MC4);
Can meet different specifications of the cable (2.5~6 mm²)and accept customized length of cable ;
Cable connection using riveting and confining means;
———————————————————————————————
Shippment terms:
EMS, UPS, DHL, FedEx and TNT express shipping usually take 3-5 working days dependent on the country delivered to;
We are not responsible for any accidents, delays or other issues that are the responsibility of the shipping service;
In order to ensure you receive your order with tax free upon import, we will declare it as a "Gift" or "Sample" with a lower value but it does not reflect the total price you paid or the market value of the goods and may not workable in some countries with different tariff rules;
Any import charges or fees are on buyer's account;
———————————————————————————————
Remarks:
Accepts OEM. We also can design the cable according to your instructions, the color, specifications, length of our cables and connectors can be customized by the customers;
We can provide the cables as well as connectors linked with the cable;
We adpot select raw-materials, our products are in high quality, competitive prices, prompt delivery;
———————————————————————————————
External size:
Application example:
2 Simple,quick installation
3 Timely shippment to worldwide
4 MC4 compatible solar panel connector
solar panel waterproof connector,MC4 compatible receptacle .SC-P4AMF,TUV certificate
Main parameter:
Main parameter
Rated current : 30A
Insulationg material: PPO
Ambient temperature range: -40~+90° C
Flame class: UL94-V0
Safety class: II
Shell Protection degree: IP67
Contact material: Copper,Ni Plated
Test voltage: 6KV(TUV50Hz.1min)
Insertion force: ≤ 50N
Withdrawal force: ≥ 50N
Contact resistence: 0.4mΩ
Test voltage: 6000V(TUV50Hz,1min)
Connecting System: Crimp connection
Pin dimensions: Φ4.0 mm
———————————————————————————————
Main Speciality:
With the capacity of anti-aging and anti-ultraviolet radiation;
To meet the using requirements under bad outdoor conditions;
Meet TUV and UL standard;
Suitable for various connector (MC3,MC4);
Can meet different specifications of the cable (2.5~6 mm²)and accept customized length of cable ;
Cable connection using riveting and confining means;
———————————————————————————————
Shippment terms:
EMS, UPS, DHL, FedEx and TNT express shipping usually take 3-5 working days dependent on the country delivered to;
We are not responsible for any accidents, delays or other issues that are the responsibility of the shipping service;
In order to ensure you receive your order with tax free upon import, we will declare it as a "Gift" or "Sample" with a lower value but it does not reflect the total price you paid or the market value of the goods and may not workable in some countries with different tariff rules;
Any import charges or fees are on buyer's account;
———————————————————————————————
Remarks:
Accepts OEM. We also can design the cable according to your instructions, the color, specifications, length of our cables and connectors can be customized by the customers;
We can provide the cables as well as connectors linked with the cable;
We adpot select raw-materials, our products are in high quality, competitive prices, prompt delivery;
———————————————————————————————
External size:
Application example:
solar system
solar power system can load TV,Fan,lighting work together.They can solve energy crisis for those place where lack of electricity
JR-GD90W solar system is high ,it can provide energy for TV,Fan,Lamps and some other electric appliance.
Digital display screen outside of main box can tell you clearly how many watts the solar charge battery,how many watts you consume everyday,the output and input pressure of battery and solar panel.
Automatical protection function of inverter make the whole system more safe and efficient.
For those place where usually meet power off,and always meet power crisis,it's really an good products to solve electricity shortage.
Detail specifications:
Measurement:
Solar panel:90Watts
Battery:12V 100Ah battery
Inverter:300W
Suit:farm,village,mine,remote mountain and place where electricity net hard to reach.
JR-GD90W solar system is high ,it can provide energy for TV,Fan,Lamps and some other electric appliance.
Digital display screen outside of main box can tell you clearly how many watts the solar charge battery,how many watts you consume everyday,the output and input pressure of battery and solar panel.
Automatical protection function of inverter make the whole system more safe and efficient.
For those place where usually meet power off,and always meet power crisis,it's really an good products to solve electricity shortage.
Detail specifications:
Measurement:
Solar panel:90Watts
Battery:12V 100Ah battery
Inverter:300W
Suit:farm,village,mine,remote mountain and place where electricity net hard to reach.
Thursday, March 17, 2011
solar water heater with double water tanks
1)high efficient heat absorption
2)inner tank :food lever stainless steel:SUS304-2B
3)large capacity(360litres)
solar water heater with double water tanks specifications as follows:
1) the material of Inner tank:food level stainless steel:SUS304-2B:thickness:0.31mm
2)the material of outer tank: stainless steel :SUS304-2B
3)dual or double water tanks: 90 liters per each one
3)brackets or support :stainless steel(201),thickness:1.8mm
4)evacuated glass tube:AL-N/AL OR SS-C/CU and AL-N
5)the size of outer tank diameter:420mm or460mm
6)Insulation :polyurethane foaming:50mm
7)auxilary water tank:10litres (to be option)
8)electrical heating booster
9)intelligent controller
10)silicone seals and rubbers and so on
certificates: ISO9001 ,CCC and CE and so on
Item no.
Evacuated tube
Tank capacity
Area
Volume
Loading QTY(reference)
FOB Shanghai
Dia
length
Qty
aperture
install
20'GP
40'GP
40'HQ
(mm)
(mm)
tube
(liters)
( m2 )
( m2 )
m3
(sets)
(sets)
(sets)
(USD)
AJ-SFDS15
ø47
1500
15
90
1. 48
1.12×1.5
0.42
62
132
160
AJ-SFDS18
18
108
1.67
1.25×1.5
0.48
55
116
140
AJ-SFDS24
24
144
2.22
1.64×1.5
0.61
44
92
110
AJ-SFDS36
36
180
2.94
2.16×1.5
0.76
35
75
88
SFDS15
ø58
1800
15
150
2.1
1.28×1.8
0.58
46
97
116
SFDS18
18
180
2.51
1.52×1.8
0.68
39
83
99
SFDS24
24
240
3.33
2.00×1.8
0.88
31
65
76
SFDS36
36
360
5.04
2.96×1.8
1.27
25
36
50
2)inner tank :food lever stainless steel:SUS304-2B
3)large capacity(360litres)
solar water heater with double water tanks specifications as follows:
1) the material of Inner tank:food level stainless steel:SUS304-2B:thickness:0.31mm
2)the material of outer tank: stainless steel :SUS304-2B
3)dual or double water tanks: 90 liters per each one
3)brackets or support :stainless steel(201),thickness:1.8mm
4)evacuated glass tube:AL-N/AL OR SS-C/CU and AL-N
5)the size of outer tank diameter:420mm or460mm
6)Insulation :polyurethane foaming:50mm
7)auxilary water tank:10litres (to be option)
8)electrical heating booster
9)intelligent controller
10)silicone seals and rubbers and so on
certificates: ISO9001 ,CCC and CE and so on
Item no.
Evacuated tube
Tank capacity
Area
Volume
Loading QTY(reference)
FOB Shanghai
Dia
length
Qty
aperture
install
20'GP
40'GP
40'HQ
(mm)
(mm)
tube
(liters)
( m2 )
( m2 )
m3
(sets)
(sets)
(sets)
(USD)
AJ-SFDS15
ø47
1500
15
90
1. 48
1.12×1.5
0.42
62
132
160
AJ-SFDS18
18
108
1.67
1.25×1.5
0.48
55
116
140
AJ-SFDS24
24
144
2.22
1.64×1.5
0.61
44
92
110
AJ-SFDS36
36
180
2.94
2.16×1.5
0.76
35
75
88
SFDS15
ø58
1800
15
150
2.1
1.28×1.8
0.58
46
97
116
SFDS18
18
180
2.51
1.52×1.8
0.68
39
83
99
SFDS24
24
240
3.33
2.00×1.8
0.88
31
65
76
SFDS36
36
360
5.04
2.96×1.8
1.27
25
36
50
200W Modified sine wave inverter 48V
200W 48V Modified sine wave inverter
1).For solar system
2).One year warranty
3).CE EMC LVD ROHS Emark
200W Modified sine wave inverter
OUTPUT
AC POWER
100/110/120/220/230/240VAC
RATED POWER
200w
SURGE POWER
500w
WAVEFORM
MODIFLED SINE WAVE
FREQUENCY(Hz)
55±2 60±2 50±2
AC REGULATION
low & high 5%
USB CHARGER
NO
LED INDICATOR
LED DISPLAY POWER & FAIL STATUS
INPUT
NO LOAD CURRENT DRAW
<0.3A
DC VOLTAGE
48VDC
VOLTAGE RANGE
38.8 - 64VDC
FUSE
10A
PROTECTION
BATTERY LOW SHUTDOWN
38.8 - 41.2VDC
OVER TEMPERATURE
70°C
OUTPUT SHORT
SHUT OFF OUTPUT VOLTAGE,RE-POWER ON TO RECOVER
OVER LOAD
350W
OVER VOLTAGE
15 - 16VDC
OTHER
DIMENSION
240*110*63MM
PACKING
CARTON:60*36.5*30CM 14PCS/CTN
COOLING
NORMAL
SOCKET
INCIDENTAL A OMNIPOTENCE SOCKET
ADDITION
NET WEIGHT(KG)
1.2KG
gross weight
25.5KG
1).For solar system
2).One year warranty
3).CE EMC LVD ROHS Emark
200W Modified sine wave inverter
OUTPUT
AC POWER
100/110/120/220/230/240VAC
RATED POWER
200w
SURGE POWER
500w
WAVEFORM
MODIFLED SINE WAVE
FREQUENCY(Hz)
55±2 60±2 50±2
AC REGULATION
low & high 5%
USB CHARGER
NO
LED INDICATOR
LED DISPLAY POWER & FAIL STATUS
INPUT
NO LOAD CURRENT DRAW
<0.3A
DC VOLTAGE
48VDC
VOLTAGE RANGE
38.8 - 64VDC
FUSE
10A
PROTECTION
BATTERY LOW SHUTDOWN
38.8 - 41.2VDC
OVER TEMPERATURE
70°C
OUTPUT SHORT
SHUT OFF OUTPUT VOLTAGE,RE-POWER ON TO RECOVER
OVER LOAD
350W
OVER VOLTAGE
15 - 16VDC
OTHER
DIMENSION
240*110*63MM
PACKING
CARTON:60*36.5*30CM 14PCS/CTN
COOLING
NORMAL
SOCKET
INCIDENTAL A OMNIPOTENCE SOCKET
ADDITION
NET WEIGHT(KG)
1.2KG
gross weight
25.5KG
solar -wind hybrid street light
Type cPower supply system DC,safety and energy saving, no pollution
Height=8000mm
Light source 60WLED white lightdie-cast
Type
CSS-W460
Power supply system
DC,safety and energy saving, no pollution
Height
=8000mm
Light source
60WLED,white light die-casting aluminum
Wind mill
300W, full-permanent magnet wind turbine 3 wind blades
Controller
microcomputer intelligent controller, light control/timing control, automatically turn on after sunset, turn off automatically as user’s preset sunrise
Working time
8-10hrs/night,continually works for 3-5 rainy days
Materia
l Steel pipe, hot dipped galvanization, spraying powder and corrosion-resistant
Scope of application
Urban trunk/sub-trunk road,Community area,Park,Village
Height=8000mm
Light source 60WLED white lightdie-cast
Type
CSS-W460
Power supply system
DC,safety and energy saving, no pollution
Height
=8000mm
Light source
60WLED,white light die-casting aluminum
Wind mill
300W, full-permanent magnet wind turbine 3 wind blades
Controller
microcomputer intelligent controller, light control/timing control, automatically turn on after sunset, turn off automatically as user’s preset sunrise
Working time
8-10hrs/night,continually works for 3-5 rainy days
Materia
l Steel pipe, hot dipped galvanization, spraying powder and corrosion-resistant
Scope of application
Urban trunk/sub-trunk road,Community area,Park,Village
solar Charger for iPhone,external battery for iphone ,mobile phone
1.Battery type:Lithium-Ion battery
2.Capactiy:1900mah
3.Rate input: 5V/800mA
4.Rate output:: 5V/500mA
external battery for iPhone, solar Charger for iPhone
Provide power for iPhone anytime anywhere
Charger for iPhone 1st / iPhone 3G/ iPhone 3GS/ iPhone 4
1900mAh
Solar power station for iPhone
Battery charger for iPhone!
- Easy operation,Just plug iPhone into the charger for charging
-Charging anytime anywhere!
-Perfectly suit outdoor activity and businesss trip.
-Innovation for digital life
-Great Capacity
-Safety
-Vogue&Portable
[ Specification ]
Model No.:SAC-1900S
Battery type:Lithium-Ion battery
Dimension: 67*62*17(mm)
Weight:69g
Color: white,black
Capactiy:1900mah
Rate input: 5V/800mA
Rate output:: 5V/500mA
[ Accessories ]
Including accessory:
N/A (Recharge the charger with iPhone or iPod original USB cable)
[ Compatible with ]
* iPod
* iPhone 1st
* iPhone 3G
* iPhone 3GS
* iPhone 4
It can be charge by iPhone or Ipod original charge cable
[ Feature ]
1. High Capacity of 1900mAh and solar panel design
2. Under the sunlight, Charge for mobile power when solar energy switch to electrical energy
3. Specialized charge for iPhone 3G,and iPhone
4. Green lithium battery cell,the cycle time can get more than 500 times
5. It can check balance power
6. Intellectual protection chip:protection for overcharge,overdischarge,overload and short circuit protection.
7. East to operate:just plug into it and start charging
2.Capactiy:1900mah
3.Rate input: 5V/800mA
4.Rate output:: 5V/500mA
external battery for iPhone, solar Charger for iPhone
Provide power for iPhone anytime anywhere
Charger for iPhone 1st / iPhone 3G/ iPhone 3GS/ iPhone 4
1900mAh
Solar power station for iPhone
Battery charger for iPhone!
- Easy operation,Just plug iPhone into the charger for charging
-Charging anytime anywhere!
-Perfectly suit outdoor activity and businesss trip.
-Innovation for digital life
-Great Capacity
-Safety
-Vogue&Portable
[ Specification ]
Model No.:SAC-1900S
Battery type:Lithium-Ion battery
Dimension: 67*62*17(mm)
Weight:69g
Color: white,black
Capactiy:1900mah
Rate input: 5V/800mA
Rate output:: 5V/500mA
[ Accessories ]
Including accessory:
N/A (Recharge the charger with iPhone or iPod original USB cable)
[ Compatible with ]
* iPod
* iPhone 1st
* iPhone 3G
* iPhone 3GS
* iPhone 4
It can be charge by iPhone or Ipod original charge cable
[ Feature ]
1. High Capacity of 1900mAh and solar panel design
2. Under the sunlight, Charge for mobile power when solar energy switch to electrical energy
3. Specialized charge for iPhone 3G,and iPhone
4. Green lithium battery cell,the cycle time can get more than 500 times
5. It can check balance power
6. Intellectual protection chip:protection for overcharge,overdischarge,overload and short circuit protection.
7. East to operate:just plug into it and start charging
solar Chrismas light
solar string light . nice color ,vivid and lively
high quality and lowe price
Item: XLJD -101A
Solar panel: Mono/Amorphous
Light Source :20 White LED or blue LED
Material:Plastic
Rechargeable battery: 2*NI-CD/MH(600mAh 2 piece)
light duration: 8-10 hours per night ,2-3 cloudy days
Dimension:2meters from solar panel to first led,0.3m between each led
Ip 23
CE& ROHS
high quality and lowe price
Item: XLJD -101A
Solar panel: Mono/Amorphous
Light Source :20 White LED or blue LED
Material:Plastic
Rechargeable battery: 2*NI-CD/MH(600mAh 2 piece)
light duration: 8-10 hours per night ,2-3 cloudy days
Dimension:2meters from solar panel to first led,0.3m between each led
Ip 23
CE& ROHS
solar Emergency light
Light Source: Super brightness LED 30pcs,white/yellow/blue/orange/red/colorful
Type:ZH-W101
Specification: H4.5*14.5*14.5CM
Solar panel:75mm×75mm 5.5/420 -450MA
Battery: 6PCS1000mA NI-Mh
Light Source: Super brightness LED 30pcs,white/yellow/blue/orange/red/colorful
Shining degree:3000-12000MCD
Operating time :4-5hours or longer(full charged)
Type:ZH-W101
Specification: H4.5*14.5*14.5CM
Solar panel:75mm×75mm 5.5/420 -450MA
Battery: 6PCS1000mA NI-Mh
Light Source: Super brightness LED 30pcs,white/yellow/blue/orange/red/colorful
Shining degree:3000-12000MCD
Operating time :4-5hours or longer(full charged)
solar Glass
Low iron patterned solar glass
1,SPF(Best -U1) ISO9001-14001
2,High light transmission >91.6%
3, Up to 5 times quality
HM low iron solar glass, patterned glass with excellent performance on high solar transmittance, low absorbance, low reflectance and low iron content, is the ideal encapsulation material for solar thermal and photovoltaic modules.
The products will adequately meet the solar industries booming demands on high quality low iron glass. Therefore, the solar modules manufacturers'competitive ability will tremendously hike in solar energy markets.
To meet customers’ diverse requirements, we are producing below low iron solar glass:
1.Thickness:2.5mm~10mm;Standard thickness 3.2mm and 4.0mm
2.Thickness Tolerance: 3.2mm±0.20mm;4.0mm±0.30mm; tolerance for other thickness should be confirmed by the seller and buyer
3.Max size:2250mm×3300mm
4.Solar Transmittance (3.2mm):≥91.6%
5.Iron Content:≤120ppm Fe2O3
6.Poisson's Ratio:0.2
7.Density:2.5 g/cc
8.Young's Modulus:73 GPa
9.Tensile Strength:42 MPa
10.Hemispherical Emissivity:0.84
11.Expansion Coefficient:9.03x10-6/°C
12.Softening Point:720 °C
13.Annealing Point:550 °C
14.Strain Point:500 °C
1
1,SPF(Best -U1) ISO9001-14001
2,High light transmission >91.6%
3, Up to 5 times quality
HM low iron solar glass, patterned glass with excellent performance on high solar transmittance, low absorbance, low reflectance and low iron content, is the ideal encapsulation material for solar thermal and photovoltaic modules.
The products will adequately meet the solar industries booming demands on high quality low iron glass. Therefore, the solar modules manufacturers'competitive ability will tremendously hike in solar energy markets.
To meet customers’ diverse requirements, we are producing below low iron solar glass:
1.Thickness:2.5mm~10mm;Standard thickness 3.2mm and 4.0mm
2.Thickness Tolerance: 3.2mm±0.20mm;4.0mm±0.30mm; tolerance for other thickness should be confirmed by the seller and buyer
3.Max size:2250mm×3300mm
4.Solar Transmittance (3.2mm):≥91.6%
5.Iron Content:≤120ppm Fe2O3
6.Poisson's Ratio:0.2
7.Density:2.5 g/cc
8.Young's Modulus:73 GPa
9.Tensile Strength:42 MPa
10.Hemispherical Emissivity:0.84
11.Expansion Coefficient:9.03x10-6/°C
12.Softening Point:720 °C
13.Annealing Point:550 °C
14.Strain Point:500 °C
1
solar Junction Box
Electrical Features
Rated Voltage: DC 1000V
Rated Current: 12A
Using Power: 160-220W
With the capacity of anti-aging and resistance to ultraviolet radiation on the outer cover;
To meet the using requirement under bad outdoor condiiton;
Adopt tight-hoop connection of cable
Fastness of male and female points with stable self-locking system which is easy to lock and open.
Rated Voltage: DC 1000V
Rated Current: 12A
Using Power: 160-220W
With the capacity of anti-aging and resistance to ultraviolet radiation on the outer cover;
To meet the using requirement under bad outdoor condiiton;
Adopt tight-hoop connection of cable
Fastness of male and female points with stable self-locking system which is easy to lock and open.
solar Junction box solar supplier
solar junction box ,
PV junction box,
Solar Junction box provides the user with safety, swift and reliable way to connect to the batteries of solar.
Main Parameter:
Rated voltage:DC1000V
Max Current: 6.8A
Ambient temperature: -40~+85
Protection class: Class2
Protection degree: IP65
Rated connecting capacity:4mm2
Main speciality:
With the capacity of anti-aging and resistance to ultraviolet radiation on the outer housing;
To meet the using requirement under bad outdoor condition;
All double fastness connection;
Extension connection room according to different need.
PV junction box,
Solar Junction box provides the user with safety, swift and reliable way to connect to the batteries of solar.
Main Parameter:
Rated voltage:DC1000V
Max Current: 6.8A
Ambient temperature: -40~+85
Protection class: Class2
Protection degree: IP65
Rated connecting capacity:4mm2
Main speciality:
With the capacity of anti-aging and resistance to ultraviolet radiation on the outer housing;
To meet the using requirement under bad outdoor condition;
All double fastness connection;
Extension connection room according to different need.
solar LED airfield sign light
solar powered LED lighting for aviations. Marking,obstruction,safety and lighting for
airfields
SPECIFICATION
1).Nominal night visibility:2km-5.5km
2)Turn on at dust and turn off at dawn automatically.
3)Completely self containt,no cables,no people management.
4)Waterproof and shock resistant
5)Nearly recharge themselves at nearly all kinds of conditions.
6)Automony time:steady on model:70 hours; flashing model:140hours.
7)Battery type: Ni-Mh, 5000mah.2.4v
8)Solar panel: mono crystalline 1.1W APPLICATION:
1) TAXIWAY AND RUNWAY LIGHTING
2)THRESHOLD AND CAUTION LIGHTING
3)HELIPAD LIGHTING 4)EMERGENCY AIRFIELD LIGHTING
5)TACTICAL AIRFIELD LIGHTING
6)AIRFIELD SAFETY LIGHTING
7)WAY FINDING LIGHTING
8)TOWER AND CRANE MARKING
airfields
SPECIFICATION
1).Nominal night visibility:2km-5.5km
2)Turn on at dust and turn off at dawn automatically.
3)Completely self containt,no cables,no people management.
4)Waterproof and shock resistant
5)Nearly recharge themselves at nearly all kinds of conditions.
6)Automony time:steady on model:70 hours; flashing model:140hours.
7)Battery type: Ni-Mh, 5000mah.2.4v
8)Solar panel: mono crystalline 1.1W APPLICATION:
1) TAXIWAY AND RUNWAY LIGHTING
2)THRESHOLD AND CAUTION LIGHTING
3)HELIPAD LIGHTING 4)EMERGENCY AIRFIELD LIGHTING
5)TACTICAL AIRFIELD LIGHTING
6)AIRFIELD SAFETY LIGHTING
7)WAY FINDING LIGHTING
8)TOWER AND CRANE MARKING
solar LED brick
100% solar powered
No wiring
Fast and easy installation
High performance and reliable quality
No utility bill, save mone
1.Material of light: super light-permeability PC
2.Solar cell: crystalline silicon 4.0V/180mA
3.Storage component: NiMH HT AA 1.2V/2,400mAh battery or 2.0V/480F super capacitor
4.Light source: 6 pieces super bright LEDs
5.Color of light: red, green, blue, white and yellow
6.Light mode: one color constant type
7.Work temperature: -25 to 75°C
8.Work time: over 12 hours after 1 sunny day's charge, 3 nights continuously if battery fully charged
9.
IP rate: IP67
Advantages:
100% solar powered
No wiring
Fast and easy installation
High performance and reliable quality
No utility bill, save money and energy
No buried or overhead cables
Low maintenance
Controller has an adjustable timer and low voltage disconnect
Intelligent control for automatically switching on/off
Environmental-friendly
Nice design
Customized requirements are accepted for designing
More details:
Product size: 145 x 145 x 42mm
Net weight: 0.70kg
Packing
:
Pieces/carton: 20 pieces
20ft container: 21,360 pieces
No wiring
Fast and easy installation
High performance and reliable quality
No utility bill, save mone
1.Material of light: super light-permeability PC
2.Solar cell: crystalline silicon 4.0V/180mA
3.Storage component: NiMH HT AA 1.2V/2,400mAh battery or 2.0V/480F super capacitor
4.Light source: 6 pieces super bright LEDs
5.Color of light: red, green, blue, white and yellow
6.Light mode: one color constant type
7.Work temperature: -25 to 75°C
8.Work time: over 12 hours after 1 sunny day's charge, 3 nights continuously if battery fully charged
9.
IP rate: IP67
Advantages:
100% solar powered
No wiring
Fast and easy installation
High performance and reliable quality
No utility bill, save money and energy
No buried or overhead cables
Low maintenance
Controller has an adjustable timer and low voltage disconnect
Intelligent control for automatically switching on/off
Environmental-friendly
Nice design
Customized requirements are accepted for designing
More details:
Product size: 145 x 145 x 42mm
Net weight: 0.70kg
Packing
:
Pieces/carton: 20 pieces
20ft container: 21,360 pieces
solar LED lamp
solar led lamp is widely applicable for lighting on community roads, yards, square plaza, park, sub-truck roads
Introduction of Solar LED Lamp:
Solar led lamp is a new top-end and energy-saving solar product with newest LED lamp. It is widely applicable for lighting on community roads, yards, square plaza, park, sub-truck roads, etc.
Features of Solar LED Lamp:
1. Solar power system, design integrating solar power with lamp into one body; better-looking and more fashionable;
2. Adopting LED solid lamp, more energy-saving, longer life-span;
3. Delay and adjustable LED power drive set by wireless, flexible use;
4. Final product, more convenient to deliver and install it.
Technical Parameter of Solar LED lamp:
Solar Panel
50Wp/36V monocrystalline silicon
Storage Battery
24V/20Ah free-maitanence lead acid battery
Controller
24V/10A
Backup by Public Electricity
Yes
Head Lamp
LED 30W Adjustable
Luminous Flux
3000lm
Light Beam Angle
120
o
x50
o
Ellipse Facula
Remote Control Distance
100m
Lamppost Height
3-6m
Introduction of Solar LED Lamp:
Solar led lamp is a new top-end and energy-saving solar product with newest LED lamp. It is widely applicable for lighting on community roads, yards, square plaza, park, sub-truck roads, etc.
Features of Solar LED Lamp:
1. Solar power system, design integrating solar power with lamp into one body; better-looking and more fashionable;
2. Adopting LED solid lamp, more energy-saving, longer life-span;
3. Delay and adjustable LED power drive set by wireless, flexible use;
4. Final product, more convenient to deliver and install it.
Technical Parameter of Solar LED lamp:
Solar Panel
50Wp/36V monocrystalline silicon
Storage Battery
24V/20Ah free-maitanence lead acid battery
Controller
24V/10A
Backup by Public Electricity
Yes
Head Lamp
LED 30W Adjustable
Luminous Flux
3000lm
Light Beam Angle
120
o
x50
o
Ellipse Facula
Remote Control Distance
100m
Lamppost Height
3-6m
200W Mono Solar Module
small solar system which is very suitable for home use,it is popular for africa market now.
solar system
1.solar pv panel,Mono type 10w-18v
2,Battery:12V7AH
3,Loads:3 W Led Lamp 2pcs
4,working time:7-8hours each day.
Applications:
Military
Universities
Businesses
Homeowners
Recreational
Laptop
Communications
Remote field testing
Surveillance
Small TV/VCR
Video recorders
Work lights
Emergency power
Learn more about products detailed description,pricing and service.Please send mail to us!
solar system
1.solar pv panel,Mono type 10w-18v
2,Battery:12V7AH
3,Loads:3 W Led Lamp 2pcs
4,working time:7-8hours each day.
Applications:
Military
Universities
Businesses
Homeowners
Recreational
Laptop
Communications
Remote field testing
Surveillance
Small TV/VCR
Video recorders
Work lights
Emergency power
Learn more about products detailed description,pricing and service.Please send mail to us!
solar LED lantern
Bulb:12 super white LED
Battery:Ni-MH3.6v/600mA
Solar panel:0.45watt/80mA
The solar lantern is used for camping,hiking,
Product name:12 Led solar lantern
Product size:
Stretched size:70x65x175mm ; Folded size: 70x65x125mm
Bulb:12 super white LED
Battery:Ni-MH3.6v/600mA
Solar panel:0.45watt/80mA
Solar charge:8.5hours
Discharge time:5hours
Battery:Ni-MH3.6v/600mA
Solar panel:0.45watt/80mA
The solar lantern is used for camping,hiking,
Product name:12 Led solar lantern
Product size:
Stretched size:70x65x175mm ; Folded size: 70x65x125mm
Bulb:12 super white LED
Battery:Ni-MH3.6v/600mA
Solar panel:0.45watt/80mA
Solar charge:8.5hours
Discharge time:5hours
solar LED lantern
solar LED flashing light can be installed on buoys,boats, fishery cages and other dangerous spots
SPECIFICATION
1).Nominal night visibility:2km-5.5km
2)Turn on at dust and turn off at dawn automatically.
3)Completely self containt,no cables,no people management.
4)Waterproof and shock resistant
5)Nearly recharge themselves at nearly all kinds of conditions.
6)Automony time:steady on model:70 hours; flashing model:140hours.
7)Battery type: Ni-Mh, 5000mah.2.4v
8)Solar panel: mono crystalline 1.1W
APPLICATION
1) MARINE AIDS TO NAVIGATION
2)OIL AND GAS OFFSHORE PLATFORM MARKING
3)PORT LIGHTING
4)MARINA LIGHTING
5) DOCK LIGHTING
SPECIFICATION
1).Nominal night visibility:2km-5.5km
2)Turn on at dust and turn off at dawn automatically.
3)Completely self containt,no cables,no people management.
4)Waterproof and shock resistant
5)Nearly recharge themselves at nearly all kinds of conditions.
6)Automony time:steady on model:70 hours; flashing model:140hours.
7)Battery type: Ni-Mh, 5000mah.2.4v
8)Solar panel: mono crystalline 1.1W
APPLICATION
1) MARINE AIDS TO NAVIGATION
2)OIL AND GAS OFFSHORE PLATFORM MARKING
3)PORT LIGHTING
4)MARINA LIGHTING
5) DOCK LIGHTING
solar LED lawn light garden light grass light
solar LED lawn light
1.solar powered
2.LED light source
3.2-year warranty
4.environmental friendly
solar LED lawn light
Specification
Solar Panel
0.75W, monocrystalline or polycrystalline solar panels
Light Source
0.24W super bright white LED
Battery
Two 750mAh NI-MH batteries
Working Time
More than 8 hours after fully charged
Main Material
Die-cast aluminum
Size
9.46 * 9.46 * 24.43 inch
Working Temperature
-20 ~ 70 degree
MOQ
1 pcs
Solar Lawn Lights Features
CHMY LED solar lawn lights are beautiful, rechargeable lawn lights. They feature LED technology for extra-long run times, multiple LEDs for maximum brightness and special reflectors to enhance and distribute light evenly.
Specifications below are for reference only. The system will be configured according to the environmental conditions of the installation site as well as your specific requirements. Please contact us about customized lighting solutions, including requests for solar lights that last more than 10 hours per night.
Applications
Pathway lighting, park lighting, ramp lighting, gate lighting, sidewalk lighting, yard lighting, private road lighting, fence lighting, farm & ranch lighting, campus lighting
1.solar powered
2.LED light source
3.2-year warranty
4.environmental friendly
solar LED lawn light
Specification
Solar Panel
0.75W, monocrystalline or polycrystalline solar panels
Light Source
0.24W super bright white LED
Battery
Two 750mAh NI-MH batteries
Working Time
More than 8 hours after fully charged
Main Material
Die-cast aluminum
Size
9.46 * 9.46 * 24.43 inch
Working Temperature
-20 ~ 70 degree
MOQ
1 pcs
Solar Lawn Lights Features
CHMY LED solar lawn lights are beautiful, rechargeable lawn lights. They feature LED technology for extra-long run times, multiple LEDs for maximum brightness and special reflectors to enhance and distribute light evenly.
Specifications below are for reference only. The system will be configured according to the environmental conditions of the installation site as well as your specific requirements. Please contact us about customized lighting solutions, including requests for solar lights that last more than 10 hours per night.
Applications
Pathway lighting, park lighting, ramp lighting, gate lighting, sidewalk lighting, yard lighting, private road lighting, fence lighting, farm & ranch lighting, campus lighting
solar LED light,solar light,solar lamp
1.easy to take
2.environmental friendly and energy saving
3.long lighting time
4.economic
AT-7
Current:25mA
Voltage:4.5V
Life time for mono crystal panel: 2 years.
AT-12
A: Adopting superbright white LED as lighting source. It’s a green and energy saving flashlight
B: It is very convenient and can be widely applied in camping. traveling, military factors and other fields
C: Onc fully charged by putting it under the sunshine 3-4 hrs. it can continuously work for more than 7-8 hrs
Solar panel: 0.3W
Battery: 1pcs 600mah Ni-Mh or Ni-cd rechargable batteries.
LED: 5pcs super bright LED
Size: 18 x 6 x 6CM
Weight: 83g/pc
Lighting time: 4-6hours
Charging time: 6-8 hours
AT-14
1.
(1)AT14-LED solar power flashlight. switch ON/OFF button. to turn on or turn off the flashlight.
(2)Rated power: 0.45W. charge the mono crystal panel under sunlight for 6 hours and it will last up to 8 hours.
(3)Ni-Cd rechargeable battery. source power: super bright led.
(4)Life tlme for mono crystal panel: 20 years.
2.
(1)AT14-solar power flashlight. switch ON/OFF button to turn on or turn off the flashlight.
(2)Rated power: 0.45W. charge the mono crystal panel under sunlight for 6 hours and it will last up to 80 minutes.
(3)Ni-Cd rechargeable battery. source power: bulb 2.4V, 0.5A light range: 300m
AT-24
(1)Solar torch with led lights. switch ON/OFF button. to turn on or turn off the solar torch.
(2)Rated power: 0.45W. charge the mono crystal panel unded solar torch for 6 hours and it will last up to 8 hours.
(3)NI-Cd rechargeable battery. source power: super bright led
(4) Life time for mono crystal panel: 20 years
2.environmental friendly and energy saving
3.long lighting time
4.economic
AT-7
Current:25mA
Voltage:4.5V
Life time for mono crystal panel: 2 years.
AT-12
A: Adopting superbright white LED as lighting source. It’s a green and energy saving flashlight
B: It is very convenient and can be widely applied in camping. traveling, military factors and other fields
C: Onc fully charged by putting it under the sunshine 3-4 hrs. it can continuously work for more than 7-8 hrs
Solar panel: 0.3W
Battery: 1pcs 600mah Ni-Mh or Ni-cd rechargable batteries.
LED: 5pcs super bright LED
Size: 18 x 6 x 6CM
Weight: 83g/pc
Lighting time: 4-6hours
Charging time: 6-8 hours
AT-14
1.
(1)AT14-LED solar power flashlight. switch ON/OFF button. to turn on or turn off the flashlight.
(2)Rated power: 0.45W. charge the mono crystal panel under sunlight for 6 hours and it will last up to 8 hours.
(3)Ni-Cd rechargeable battery. source power: super bright led.
(4)Life tlme for mono crystal panel: 20 years.
2.
(1)AT14-solar power flashlight. switch ON/OFF button to turn on or turn off the flashlight.
(2)Rated power: 0.45W. charge the mono crystal panel under sunlight for 6 hours and it will last up to 80 minutes.
(3)Ni-Cd rechargeable battery. source power: bulb 2.4V, 0.5A light range: 300m
AT-24
(1)Solar torch with led lights. switch ON/OFF button. to turn on or turn off the solar torch.
(2)Rated power: 0.45W. charge the mono crystal panel unded solar torch for 6 hours and it will last up to 8 hours.
(3)NI-Cd rechargeable battery. source power: super bright led
(4) Life time for mono crystal panel: 20 years
solar LED light
solar light,low price
Solar light
XLTD-259A
Solar panel: Mono/Amorphous
Rechargeabel battery: NI-CD/NI-MH
1*white LED
Material: stainless steel
Solar light
XLTD-259A
Solar panel: Mono/Amorphous
Rechargeabel battery: NI-CD/NI-MH
1*white LED
Material: stainless steel
solar LED street light with CE RoHS
solar LED street light
1)CE&RoHS certifications,IEC test report.
2)Voltage: DC9-30V.
3)Best quality.
4)CE RoHS IEC ISO
solar
LED
street
light
1)CE&RoHS certifications,IEC test report.
2)Voltage: DC9-30V.
3)Best quality.
This is Hebei Green Photoelectric Technology Co.,Ltd.
We are a large professional manufacturer in China.
We mainly produce Solar LED street light.
Solar lights is more and more popular in the worldwide.
It is environmental-protection,energy-saving.
Sunshine duration is the most factor of the solar lights.
How is the sunshine in your country?
The Solar LED Lights are made up of:
LED lamps
Controller
Solar panel
Batteries
Pole
And so on.
Different dispositions ask different specifications.
Pls tell me:
1. Road width
2. Pole height
3. Pole apart(How many meters between two poles?)
4. How many cloudy and rainy days the solar systerm need? 3 days or 5days?
5. I will ask our technology manager to give you a best plan.
Sincerely hope to cooperate!
Sunny
1)CE&RoHS certifications,IEC test report.
2)Voltage: DC9-30V.
3)Best quality.
4)CE RoHS IEC ISO
solar
LED
street
light
1)CE&RoHS certifications,IEC test report.
2)Voltage: DC9-30V.
3)Best quality.
This is Hebei Green Photoelectric Technology Co.,Ltd.
We are a large professional manufacturer in China.
We mainly produce Solar LED street light.
Solar lights is more and more popular in the worldwide.
It is environmental-protection,energy-saving.
Sunshine duration is the most factor of the solar lights.
How is the sunshine in your country?
The Solar LED Lights are made up of:
LED lamps
Controller
Solar panel
Batteries
Pole
And so on.
Different dispositions ask different specifications.
Pls tell me:
1. Road width
2. Pole height
3. Pole apart(How many meters between two poles?)
4. How many cloudy and rainy days the solar systerm need? 3 days or 5days?
5. I will ask our technology manager to give you a best plan.
Sincerely hope to cooperate!
Sunny
solar LED street light
1.working time 6-8hours/day
2.working rainy days:3-5days
3.25W LED light source
4.100W solar panel
5.Protection Grade:IP65
Solar LED street lamp:
1)solar panel:100Wp;
2) battery:12V150Ah;
3) Light source:25WLED;
4) controller:Solar dedicated controller;
5) Body material:Galvanize iron;
6) Height: 6.68m;
7)working time:6-8h/day, for 3-5overcast days;
8)environment temperature:-40°C~+65°C;
9)Protection grade: IP65
2.working rainy days:3-5days
3.25W LED light source
4.100W solar panel
5.Protection Grade:IP65
Solar LED street lamp:
1)solar panel:100Wp;
2) battery:12V150Ah;
3) Light source:25WLED;
4) controller:Solar dedicated controller;
5) Body material:Galvanize iron;
6) Height: 6.68m;
7)working time:6-8h/day, for 3-5overcast days;
8)environment temperature:-40°C~+65°C;
9)Protection grade: IP65
solar LED street light
solar LED street light is widely applicable for lighting on community roads, yards, square plaza, park, sub-truck roads
Introduction of Solar LED Street Light:
Integrated solar LED street light is a new top-end and energy-saving solar product with newest LED lamp. It is widely applicable for lighting on community roads, yards, square plaza, park, sub-truck roads, etc.
Features of Solar LED Street Light:
1. Solar power system, design integrating solar power with lamp into one body; better-looking and more fashionable;
2. Adopting LED solid lamp, more energy-saving, longer life-span;
3. Delay and adjustable LED power drive set by wireless, flexible use;
4. Final product, more convenient to deliver and install it.
Technical Parameter of Solar Street Light:
Solar Panel
50Wp/36V monocrystalline silicon
Storage Battery
24V/20Ah free-maitanence lead acid battery
Controller
24V/10A
Backup by Public Electricity
Yes
Head Lamp
LED 30W Adjustable
Luminous Flux
3000lm
Light Beam Angle
120
o
x50
o
Ellipse Facula
Remote Control Distance
100m
Lamppost Height
3-6m
Introduction of Solar LED Street Light:
Integrated solar LED street light is a new top-end and energy-saving solar product with newest LED lamp. It is widely applicable for lighting on community roads, yards, square plaza, park, sub-truck roads, etc.
Features of Solar LED Street Light:
1. Solar power system, design integrating solar power with lamp into one body; better-looking and more fashionable;
2. Adopting LED solid lamp, more energy-saving, longer life-span;
3. Delay and adjustable LED power drive set by wireless, flexible use;
4. Final product, more convenient to deliver and install it.
Technical Parameter of Solar Street Light:
Solar Panel
50Wp/36V monocrystalline silicon
Storage Battery
24V/20Ah free-maitanence lead acid battery
Controller
24V/10A
Backup by Public Electricity
Yes
Head Lamp
LED 30W Adjustable
Luminous Flux
3000lm
Light Beam Angle
120
o
x50
o
Ellipse Facula
Remote Control Distance
100m
Lamppost Height
3-6m
solar LED street light
solar LED street light with International patent,
solar LED street light with International patent,
automatic on off,
10-12 hours light per night,
4 night light after fully charged.
solar LED street light with International patent,
automatic on off,
10-12 hours light per night,
4 night light after fully charged.
solar LED string light
3V 200mA amorphous solar cell, 80*75mm
1.2V 800mAh Ni-Mh AA battery
8 flashing effects
homochromy and RGBY
Specification:
power source: 1 piece of AA Ni-Mh battery, 1.2V 800mAh, rechargeble
solar panel: 3V 200mA amorphous solar cell, 80*75mm
string length: 10.60 m. 1.6m cable from battery case to first LED, 9m LED string.
LED number: 100 pcs of LED
cable: 3 cables in homochromy string, 5 cables in RGBY string, cable diameter 1.6mm, brass wires
cable color: green (standard), transparent, black, brown
color: white/blue/green/red/yellow/RGBY
flashing: 8 flashing modes
charge time: 6-7 hours
working time: 6 hours after being fully charged.
packing: 1 piece/color box
Photos
:
1.2V 800mAh Ni-Mh AA battery
8 flashing effects
homochromy and RGBY
Specification:
power source: 1 piece of AA Ni-Mh battery, 1.2V 800mAh, rechargeble
solar panel: 3V 200mA amorphous solar cell, 80*75mm
string length: 10.60 m. 1.6m cable from battery case to first LED, 9m LED string.
LED number: 100 pcs of LED
cable: 3 cables in homochromy string, 5 cables in RGBY string, cable diameter 1.6mm, brass wires
cable color: green (standard), transparent, black, brown
color: white/blue/green/red/yellow/RGBY
flashing: 8 flashing modes
charge time: 6-7 hours
working time: 6 hours after being fully charged.
packing: 1 piece/color box
Photos
:
200W Mono Solar Module
200W Monocrystalline Solar Module with 96pcs of mono solar cell,Pmax200W,Vmp46.5V,Imp4.4A
TUV/CE/CEC/UL/MCS
specification of 200W monocrystalline solar module
Model
JT-200M-96
Pmax
200W
power tolerance:
±3%
Vmp
46.5V
Imp
4.4A
Voc
55.5V
Isc
5.10A
Pcs
96(8*12)
Cell Type
125*125 monocrystalline solar cell
Size
1575*1082*50 mm
Net weight
21.5kg
STC
1000W/m2,AM 1.5,25oC
Warranty
3 year warranty for products,10 years for 90% power ,25 years for 80% power
Accessory
3.2mm thick tempered glass,aluminium frame
Others
There are drainage holes on the Border components, eliminating the framework of deformation caused by rain or snow accumulated in the framework
TUV/CE/CEC/UL/MCS
specification of 200W monocrystalline solar module
Model
JT-200M-96
Pmax
200W
power tolerance:
±3%
Vmp
46.5V
Imp
4.4A
Voc
55.5V
Isc
5.10A
Pcs
96(8*12)
Cell Type
125*125 monocrystalline solar cell
Size
1575*1082*50 mm
Net weight
21.5kg
STC
1000W/m2,AM 1.5,25oC
Warranty
3 year warranty for products,10 years for 90% power ,25 years for 80% power
Accessory
3.2mm thick tempered glass,aluminium frame
Others
There are drainage holes on the Border components, eliminating the framework of deformation caused by rain or snow accumulated in the framework
solar LED warning light bulb
solar LED warning light bulb,
with REd or amber light,
with or without E27 base,
automatic on off,
flashing at night.
with REd or amber light,
with or without E27 base,
automatic on off,
flashing at night.
solar Module
1) High-efficiency PV Panel
2) CE ISO RoHS
3) High efficiency above 17%
4) 25 years warranty
Maximum Power (Pmax)
[Wp]
185W
Type NO.
LW185(24)1580/808M
Maximum Power (Pmax)
[Wp]
185
Open circuit Voltage (Voc)
[V]
44.6
Short circuit Current (lsc)
[A]
5.72
Maximum Power Voltage (Vmp)
[V]
35.6
Maximum Power Current (lmp)
[A]
5.2
Maximum System Voltage
[V]
1000
Standard Test Conditions
AM = 1.5, E = 1,000 W/m², cell temperature: 25°C
Weight
[mm]
15
Dimensions
[kg]
1580*808*50
Temp. coefficient Power
[%/°C]
– 0.38
Temp. coefficient Voc
[mV/°C]
– 66.0
Temp. coefficient Isc
[mA/°C]
7.1
Cell Type
Mono Crystalline Cell
Frame structure (Material, Corners)
Aluminium 50mm
Back side
TPT
Encapsulated with toughened glass
Low iron tempered glass with thickness of 3.2mm,light transmittance above91%
Features
1. High efficiency performance
High conversion efficiency attributes to leading innovative photovoltaic technologies and superior cells for grid connected systems.
2. Reliability
High reliability guarantees ±3% power output tolerance and a long life-time for high earnings.
3. Rigidity
Rigid construction combined with low-iron tempered solar glass presents high mechanical capacitance in even frozen condition
2) CE ISO RoHS
3) High efficiency above 17%
4) 25 years warranty
Maximum Power (Pmax)
[Wp]
185W
Type NO.
LW185(24)1580/808M
Maximum Power (Pmax)
[Wp]
185
Open circuit Voltage (Voc)
[V]
44.6
Short circuit Current (lsc)
[A]
5.72
Maximum Power Voltage (Vmp)
[V]
35.6
Maximum Power Current (lmp)
[A]
5.2
Maximum System Voltage
[V]
1000
Standard Test Conditions
AM = 1.5, E = 1,000 W/m², cell temperature: 25°C
Weight
[mm]
15
Dimensions
[kg]
1580*808*50
Temp. coefficient Power
[%/°C]
– 0.38
Temp. coefficient Voc
[mV/°C]
– 66.0
Temp. coefficient Isc
[mA/°C]
7.1
Cell Type
Mono Crystalline Cell
Frame structure (Material, Corners)
Aluminium 50mm
Back side
TPT
Encapsulated with toughened glass
Low iron tempered glass with thickness of 3.2mm,light transmittance above91%
Features
1. High efficiency performance
High conversion efficiency attributes to leading innovative photovoltaic technologies and superior cells for grid connected systems.
2. Reliability
High reliability guarantees ±3% power output tolerance and a long life-time for high earnings.
3. Rigidity
Rigid construction combined with low-iron tempered solar glass presents high mechanical capacitance in even frozen condition
solar PIR light
solar PIR light
solar powered,no electricity cost
super bright LED,28pieces,auto work when people present or move
solar PIR light
The Security Sensor LED Light is a solar powered convenience light with a built-in motion sensor.
Completely solar powered,the lamp is a motion sensor light consisting of a large, high intensity LED (28 LEDs) combined with our exclusive PIR space sensing technology.
Features:
New design, powered by solar energy, no AC or DC power needed
solar panel:4V,200mA
28long-lasting LEDs
Solar powered panel with Rechargeable lead-acid battery.
superb safety benefits, and environmental friendliness
Technical Specs:
Coverage:110° sensing angle
Detecting Range: up to 10m
Adjustable under various ambient condition
Delay Time: between 60-240seconds adjustable
Matrix Light:54 Super Bright LEDs
Battery: Ni-MH battery
Solar Charger Board: 9VDC/2.5W Monocrystalline (with 15" Cables)
Continuous Illumination Time: Up to 5+ hours
Weight: 1kg
Operation Temp.: -25F to +125F
Complies with CE
One year limited warranty
The lamp is dedicated in keeping consistent with a green standard, designed with the environment in mind
solar powered,no electricity cost
super bright LED,28pieces,auto work when people present or move
solar PIR light
The Security Sensor LED Light is a solar powered convenience light with a built-in motion sensor.
Completely solar powered,the lamp is a motion sensor light consisting of a large, high intensity LED (28 LEDs) combined with our exclusive PIR space sensing technology.
Features:
New design, powered by solar energy, no AC or DC power needed
solar panel:4V,200mA
28long-lasting LEDs
Solar powered panel with Rechargeable lead-acid battery.
superb safety benefits, and environmental friendliness
Technical Specs:
Coverage:110° sensing angle
Detecting Range: up to 10m
Adjustable under various ambient condition
Delay Time: between 60-240seconds adjustable
Matrix Light:54 Super Bright LEDs
Battery: Ni-MH battery
Solar Charger Board: 9VDC/2.5W Monocrystalline (with 15" Cables)
Continuous Illumination Time: Up to 5+ hours
Weight: 1kg
Operation Temp.: -25F to +125F
Complies with CE
One year limited warranty
The lamp is dedicated in keeping consistent with a green standard, designed with the environment in mind
Subscribe to:
Posts (Atom)