small solar system

The system consists of the solar panel, solar controller battery inside) and electrical components. portable.convenient.

The TYP2 system has four types, the tail code of 05, 10, 40 respectively means 5W, 10W, 40W.
The controller parameters:

1) Power output interface: 3 DC 12V-0.15A/0.3A/1A interfaces (two interfaces can be remote controlled), 1 DC 5V-0.2A/0.5A/1A USB interface.
2) Charging input interface: one DC12V changing interface (solar panel or charging adapter can be connected).
3) Build-in radio and the audio output: build-in radio speaker 1W, FM 76~108MHz. 1 stereo audio output: can be connected to headphones, amplifiers. The speaker and the audio output can be switched automatically.
4) Internal battery: 12V, 2.6Ah/5Ah/15Ah (corresponding to 5W/10W/40W).
5) Dimensions L×W×H, mm):240×160×91(5W, 10W) 240×160×120(40W).

The accessory parameters
1) Solar panel: 18V, 5W/10W/40W.
2) charging adapter: input AC110~220V,output 12V-10A.
3) Two lights: 12V, 1.5W.
4) Fan: 12V, 2.5W.
5) Remote control: four buttons.


Caution
1) The solar panel should be charged 8~10 hours in direct sunshine before first using.
2) Stored in a dry environment, away from children.
3) The controller’s working temperature is 0°C~+50°C.
4) The controller’s storage temperature is -15°C~+55°C.


Common fault and solution
fault
possible reason
solution
Battery is not charging
1.Solar panel is properly connected
2.Charging adapter is properly connected
1.Check the solar panel
2.Check the charging adapter
Load does not work
1. Voltage is too low.
2. Load short-circuit occurs.
3. Load is overload.
1.Charging immediately, and then connect the load
2.Solve the short-circuit fault
3.Reduce the load power
Battery has no power in a short time
1. Charging time is insufficient.
2. Battery has aged or damaged.
1. Prolong the charging time
2. Change the battery.