Heat Pipe Solar Water Heater Collector

Heat Pipe Solar Water Heater Collector
do OEM.ISO,CCC,CE approval
professional,easy installation,high efficiency,safety,great
Heat Pipe Solar Water Heater Collector

Freeze Protection:
Because the heat pipe is located within the evacuated glass tube, brief overnight temperatures as low as -20
o
C (14
o
F) will not cause the heat pipe to freeze.
High heat conduction coefficient:is 2000-5000 times of matal materials.
High quantity of heat conduction:is 1000times od metal materials.
Low temperature difference:less than 4 difference in 2 meter long pipe.

Model Type
SHHPC
Manifold casing material
Aluminum painted un-oxygen layer
Frame material
(Aluminum or Stainless Steel or Galvanized Steel)
and painted Layer
Header pipe material
Copper
Heat pipe material
Copper
Insulation
Polyurethane 55mm or Glass-reinforced polyester
Rubber seals and rings
UV stabilized high temperature silicon rubber
Test pressure
9 bar
Collector mounting
Plane roof/slope roof
Angle of operation
10-80
Inlet Outlet
Φ22 or 3/4 inch male

Specifications:
MODEL
Ligthing
(m
2
)
Heat pipe
Supply hot water(L/
)
20/40" container
GW


diameter
length
No.

SHHPC47/12
1.26
Φ47mm
1500mm
12
70/60
133/276
28

SHHPC 47/18
1.80
18
110/60
120/249
42

SHHPC 47/20
2.10
20
125/60
110/227
46

SHHPC 47/30
3.15
30
180/60
76/158
69

SHHPC 58/12
1.73
Φ58mm
1800mm
12
110/60
118/244
40

SHHPC 58/18
2.57
18
150/60
84/175
60

SHHPC 58/20
2.88
20
175/60
77/160
64

SHHPC 58/30
4.32
30
260/60
52/106
98

Sino-American cooperation technology, needs only temperature difference, sunshine is unnecessary .no water in tubes so never burst and fur up, high heat conduction and never hibernate. Features: 1. Copper heat pipes for rapid heat transfer 2. Combined harmoniously with architecture, free maintenance 3. Suitable for mains pressure water (up to 0.6MPa) 4. Corrosion resistant 5. The perfect solar collector for domestic solar water heater systems specification: 1.Manifold material: 304 stainless steel, Thickness:0.7mm 2.Insulation: Rock wool 3.Vacuum tube:3.3 high borosilicate glass, thickness: 1.6mm, Diameter: 47/58mm, length: 1500/1800mm, hail resistance: 28mm 4.Heat pipe: TU1 oxygen free red copper 5.Seal ring: silicon rubber 6.Frame: 201 stainless steel, Thickness: 1.2mm 7.Reflector: stainless steel
If any interest,welcome to contact me on 0086-13401342073.