Heat Pipe Solar Collector (Hot products)

heat pipe solar collector
1.Place of origin:China
2.One tube broken, whole system work as usual
3.Anti-freeze, module design
heat pipe solar collector

High absorbance and performance, anti-freeze, fashionable design,can work well under extremely cold condition, easy install on flat roof or inclined roof, harmony with building perfectly.

Feature:
1) Collector separates with the storage tank. The tank can be put anywhere in
the house
2) Collector can be put on the inclined roof or flat roof.
3) Module design, arbitrary combination, harmonious with the building perfectly
4) Intelligent control and automatic operation
5) Anti-freezing: no water inside the tubes when it works
6) System controller has the anti-freezing function, the temperature circulation
will operate when it reaches the fixed temperature
7) If one tube broken, whole system can work as usual.

Material:
Manifold (interior): thickness1.2mm Copper pipe.
Manifold Casing Material: thickness 1.8 mm Aluminum alloy.
Insulation: 55mm polyurethane integral foam
Frame Material 1.2 mm thickness stainless steel
Vacuum tube dimension: D58mm* L1800mm.
Coating of vacuum tube: CU-SS-ALN/ALN.
No of vacuum tube: 10 PCS, 15 PCS, 20PCS, 25 PCS, 30 PCS.
Daily output (50
o
C ): 100L-300L.
Daily efficiency: average ≥55%, ≥45% in winter.
Heat pipe: anti-freezing > -35 centigrade.
Optimal installation angle 30-70°Vertical, 0°Horizontal
Test Pressure: 1.0 MPa (10 bar)
Working pressure: 0.6 Mpa (6 bar).

Quality warrant:
5 years for whole system, 15 years quality warrant for heat pipe vacuum tube.