EPSOLAR 40A programmable solar PV charge controller /regulator with LCD display, real clock system monitoring, VS4024N,

40A,12V/24V programable solar charge controller with LCD display:
1. common negative
2. programable parameters
3. real clock
Choose ViewStar Series solar system controller to set the charging parameters and load work mode by yourself.
ViewStar solar system controller
Application
Ideal for off-grid solar system that loads are normally on or controlled by manual
1. Solar home system
2. Solar light system
3. Solar CCTV system
4. Solar traffic system
5. Wild automatic detection equipment
6. solar Marine, Carvens
Specifications:
12/24V, 50A Model No.
VS4024N

Functions
Graphic dot matrix LCD display design
Menu operation and set.
1.Monitoring
2.Device Set
3.Parameter Set
4.Load Set
5.Rated Value
6.Factory Reset

3. Monitor real-time voltage and current for PV, battery and load, as well as battery temperature, temperature compensation coefficient.
PV
14.5V 7.2A
TEMP 25.6 °C
C: -3.5mV / °C / 2V
LOAD
12.5V 5.5A
BATT
12.5V —5.5A
4. Real-time clock and imaging system status

12 : 24 : 23
5. Indicate system status,
PV: Disconnect
BATT:NoCharge / Normal
LOAD: On
DEVICE:Normal
6. Faulty indicates specifically if happens, such as MOS-I Short, OverLoad,MOS-C Short, OverTemp,OVD,Error, lVD
7. Device set for date, time and backlights
8. Set all charging voltage parameters, such as OVD, OVR, Equal, boost, float, LVD, LVR and discharging limit voltage.
9. Four load control set, manual control, light control, light control + timer, and exact time control (both single timer and double timer are possible).
Manual
Light On / off
Light On + Timer
Time
Time Control 1
On Time: 07 : 20 : 00
Off Time: 15 : 00 : 00

Manual Control

OFF ON
Time Control 2
On Time: 19 : 20 : 00
Off Time: 07 : 00 : 00
Double Single
Light Timer Control
On:

06.0 V Delay :10 m
Off: 05.0 V Delay :10 m
Work Time: 10 : 00 : 00

10. Rated Value for battery, load and PV, Sealed, Gel, Flooded batteries selection
Rated Value
Batt: 12.0 V
Load: 10.0A PV: 10.0A
Type: Seal Gel Flood

11. Factory reset function is available.
12. Problems encountered during using will be displayed on the screen.
13. Remote temperature sensor interface
14. ITL-232 communication interface for remote meter.
15. Electronic protections: overheating, over charging, over discharging, over load, short circuit, and reverse polarity