EN12975 Copper U pipe solar collector

U pipe solar collector,Solarkeymark certificate,can mounted from 0-90 degree,Aniti-freeze,five years warranty
The Aucklat range of U Pipe solar Collector can be installed perfectly vertical or horizontal, allowing for a wider variety of installation options. It follows, therefore, that these collectors can be used where others cannot, such as on the top of a flat roof building where tilt mounting is not an option due to space limitations, as an overhang from buildings where there is no roof space to mount the solar collectors, or flush vertically on a wall.

Direct Flow is a very simple system that works in a similar fashion to a conventional flat plate collector but with the benefit of vacuum insulation.

The U-Pipe collectors have the same copper tube as a traditional heat pipe collector, but it instead bends around on itself at the bottom of the glass tube and returns directly into the double manifold. This enables the heat transfer fluid to travel through the tube for direct gain from solar radiation. As the heat transfer fluid is heated, it is pumped around the collector tubes and eventually passes through the secondary coil in the hot water storage cylinder. The U-Pipe Collectors require fewer tubes on the roof than heat pipe to reach the same peak efficiency levels.

1)European Solar Keymarked Direct Flow AKU series produces a staggering
758
Kwhm²
output –
58mm x 1800 tubes


2)Can be installed vertically, horizontally & on flat walls- allowing flexibility of system design and installation.

3)Smaller footprint than Heat Pipe & Flat plate systems - Less visually intrusive
4)No parabolic mirror - No efficiency decrease during service lifetime.
5)
Direct flow U pipe technology -More rapid heat transfer

6)Suitable for mains pressure water,operate
Up to 8bar/116psi

7)Pre- assembled in all series model - no roof assembly
8)Ideal for flat roof and Inclined up to 90°
9)Black anodised aluminium casing and frame- corrosion proof sleek single colour design

10)Dry tubes - Quick & easy replacement in situ without draining
11)Tested to withstand
25mm hailstones @ 23m/s

12)Outperform flat plates - Autumn , Winter & Spring
13)Operates at temperatures of -
40°C
14)22mm male copper manifold fitting – “plug and play” design provides fast and simple installation.

15)Individually serial numbered - for commissioning and warranty
16)Unrivalled 5 Year Warranty
Model Name
AKU10/47
AKU16/47
AKU12/58
AKU20/58
Manifold casing material
Anodized aluminum
Anodized aluminum
Anodized aluminum
Anodized aluminum
Frame material
Anodized aluminum
Anodized aluminum
Anodized aluminum
Anodized aluminum
Header pipe material
Copper
Copper
Copper
Copper
U pipe material
Copper
Copper
Copper
Copper
U pipe diameter
8mm
8mm
8mm
8mm
No. of pipes
10
16
16
20
Diameter/length of Vacuum tube
47mm/1500mm
47mm/1500mm
58mm/1800mm
58mm/1800mm
No. of vacuum tube
10
16
12
20
Aperture area
0.61m2
1.00m2
1.08m2
2.03m2
Gross area
1.2m2
1.93m2
2m2
3.00m2
Insulation
Rock wool
Rock wool
Rock wool
Rock wool
Rubber seals and rings
UV stabilized silicon rubber
UV stabilized silicon rubber
UV stabilized silicon rubber
UV stabilized silicon rubber
Test pressure
9 bar
9 bar
9 bar
9 bar
Collector mounting
Flat roof/inclined roof
Flat roof/inclined roof
Flat roof/inclined roof
Flat roof/inclined roof
Mounting angle
0 degree-90 degree
0 degree-90 degree
0 degree-90 degree
0 degree-90 degree
Gross weight
28KG
40KG
43KG
65KG