EN12975&SRCC Solar collector

1.CE,SRCC,Solar keymark certificate
2.red copper heat pipe type
3.for school,swimming pool,hotel, factory
4.15 years warranty
Introduction:
CE Solar Collector is a device that absorbs thermal energy from the sun and converts it into heat. The heat is absorbed by water, or a freeze resistant water mixture, which can then be used to supplly hot water heating, space heating and even space cooling.
It's easy to combine with existing water heating systems for commercial, buildings, hotels, hospitals, swimming pools, villas and other solar heating project
Suitalbe for all kinds of climates and regions
Parameter:

Manifold, Heat Pipe Vacuum tubes and Frame are the three main parts of a Manifold solar collector.
Manifold is composed of manifold box, rock wool, pipe line and end cover.
manifold box: Aluminum alloy with plastic spraying, thickness 2mm
rock wool: density 120-140kg/m
3
, high thermostability, high anticorrosion
pipe line: TU2, thickness 1mm, max operation pressure 6 bar, phosphor copper brazing
end cover: nylon with Silicone gasket, high thermostability
l
Heat Pipe Vacuum tube:Vacuum Tube, Heat Pipe, Aluminum fin and sealing ring
Vacuum Tube:
Structure
All-glass double-tube co-axial structure
Glass material
High borosilicate 3.3
External tube diameter and thickness
58mm±0.7mm&=1.6mm
Internal pipe diameter and thickness
47mm±0.7mm&=1.6mm
Tube length
1800mm±0.5mm
Absorptive coating property
Material
AlN/AlN-SS/CU
Sediment method
Direct-current reaction splash-jetting
Specific absorption
As=0.90~0.93(AM1.5)
Emission ratio
∑h=0.05~0.75(80°C±1.5°C)
Vacuum degree
P≤5×10
-3
Pa
Average heat loss coefficient
ULT=0.6~0.7W/(M
2
. °C)
Stagnation temperature (temperature inside of empty evacuated tubes):
270-300°C
Hail resistance
25 mm
Heat Pipe:
Condenser: Φ14mm,L=55mm; thickness:1.0mm; The shaft: Φ8mm; L=1645mm; thickness:0.7mm
Material: TU1
Starting speed and temperature: <60s; 25°C
Vacuum degree: 10
-2
~10
-3
Pa
Thermal resistance: 0.01~0.02°C/W
Isothermal: ≤4°C
Transfer power: ≥120W(temperature range50°C, test more than 180W)
Heat transfer medium in the pipe: water and copper power(antifreezing)
Working temperature: -30°C to 250°C
Enduring pressure when welding: 10Mpa
Revealing speed:<3×10
-9
paM
3
/s
Aluminum fin: thickness 0.26mm, length 1620mm
Sealing ring: material silicon, color white, high thermostability

Frame: material Aluminum alloy with plastic spraying; thickness 2.5mm
Angle: 0, 25, 45 and 60 degrees, Suitable for both flat and slope roof

Others:
End Support: Nylon 66
Dust Ring: Silicone Rubber 110
Feature:

No water in the heat pipe vacuum tube. So the system can normally work even if some vacuum tubes are broken. The manifold uses Aluminum alloy mould material of high strength with Air flow design. It is furnished in good style. Module design, arbitary combination, which can meet the demand of large water consumption
Sliding way for the frame, much easier for installation, especially suitable for European buildings
Higher efficient, stable performance, beautiful design
Products:

Model
Absorb area
(m
2
)
Vacuum tube
diameter
length
No.
YTM-SCM-58-1800-10
1.28
58mm
1800mm
10
YTM-SCM-58-1800-12
1.54
12
YTM-SCM-58-1800-15
1.92
15
YTM-SCM-58-1800-18
2.30
18
YTM-SCM-58-1800-20
2.56
20
YTM-SCM-58-1800-30
3.84
30
We Also can make the above models together to make up a large solar heating system.
Welcome to contact us for more information and details about solar heating collectors, and other solar water heating system.
Tel:+86-573-87788246 Mob: +86 15968358635 Contact person:Eric Zhu
.