Phocos CML10 solar charge controller CML5,CML8

Phocos Solar Charge Controller
1.Integrated temperature compensation
2.SOC and voltage controller LVD
3.Fully electronical
Phocos CML 10 Solar Charge Controller
Feature of solar charge controller
1.Battery state of charge display with 3 LEDs
2.Acoustic load disconnect pre-warning
3.PWM-regulation
4.Boost, equalize and float charging, also for VRLA
5.Automatic 12/24 V detection
6.Integrated temperature compensation
7.Large terminals (up to 16 mm² wire size)
8.SOC and voltage controller LVD
9.Fully electronically protected

Parameter of solar charge controller
Type
CML 10
System Voltage
12/24 V auto recognition
Max. Charge/Load Current
10 A
Float Charge
13.7/27.4 V (25°C)
Boost Charge
14.4/28.8 V (25°C), 2Std.
Activation:battery voltage<12.3/24
Equalization
14.4/29.6 V (25°C), 2Std.
Activation:battery voltage<12.1/24
Deep Discharge Protection
State if Charge Dependent
Voltage Dependent
Reconnect Level
11.4-11.9 V/ 22.8-23.8 V
11.0/22.0 V
12.8/25.6 V
Overvoltage Protection
15.5/31.0 V
Undervoltage Protection
10.5/21.0 V
Max.Panel Voltage
(Overvoltage Protection by Varistor)
30V in 12 V system
50 V in 24 V system
Temperature Compensation(Charge Voltage)
-25 mV/K at 12 V
-50 mV/K at 24 V
Max.Self Consumption
<4 mA
Grounding
Positive grounding possible
Ambient Temperature
-40 to +50°C
Max. Height
4,000 m above sea level
Battery Type
Lead acid (GEL,AGM flooded)
Wire Cross Section
< 16 mm²
Weight
160 g
Dimension(B×H×T)
80×100×32 mm
Type of Protection
IP 22