pv cell

solar cell/mono-si solar cell/cell/solar/si cell/125 solar cell/high eff% solar cell/mono-si cell/pv cell/small solar cell/power

solar cell/mono-si solar cell/cell/solar/si cell/125 solar cell/high eff% solar cell/mono-si cell/pv cell/small solar cell/power supply/solar panel cell/pv solar/photovoltaic/energy
Trough plating PECVD SNF (Silicon Nitride Film) and fully automatic printing with high-purity metal slurry on the excellent printing equipment, our crystalline silicon solar cells are endowed with the following characteristics:
1. High photoelectric conversion efficiency and stable performance.
2. Advanced diffusion technology ensuring high degree of uniformity between cells.
Size:125mm×125mm
3. Uniform PECVD plating leading to the high density.
Thickness:200±20μm
4. High regularity of printing graphics and highly-sophisticated sintering process insuring satisfactory electrical conductivity.
Model
Efficiency
Power
Open-Circuit Voltage
Short-Circuit Current
Working Voltage
Working Current
EFF%
Pm(Wp)
Voc(mV)
Isc(mA)
Vm(mV)
Im(mI)
TJSC174
17.4%
2.285
620
5408
522
4.952
TJSC172
17.2%
2.555
618
5399
520
4.913
TJSC170
17.0%
2.52
617
5354
515
4.893
TJSC168
16.8%
2.491
616
5304
511
4.875
TJSC166
16.6%
2.468
615
5262
508
4.858
TJSC164
16.4%
2.439
613
5212
499
4.838
TJSC162
16.2%
2.398
611
5201
497
4.825
TJSC160
16.0%
2.378
610
5121
493
4.824
TJSC158
15.8%
2.364
610
5078
490
4.824
TJSC156
15.6%
2.335
609
5011
487
4.795
TJSC154
15.4%
2.293
608
5000
483
4.747
TJSC152
15.2%
2.262
602
4990
480
4.713
Zhejiang Tianjing New Energy Science & Technology Co., Ltd. reserves the right to modify the description hereinbefore without sending any notice.
Technical Parameters of Tianjingsolar's solar cells
size
125 × 125 ± 0.5mm
conductivity type
P type
resistivity
0.5-3Ωcm or 3-6Ωcm
diameter(excluding non-grinding)
150 ± 0.5mm
TTV(Total Thickness Variety)
≤ 30μm
warp
≤ 0.035mm
minority carrier's lifetime
≥ 10μs
crystallographic orientation
<100> ± 10
thickness of the silicon center
200 ± 20μm
oxygen content
≤ 1.0 × 1018at/cm3
carbon content
≤ 5.0 × 1016at/cm3
dislocation density
≤ 3000/ cm2