1.good vacuum pump
2.Siemens S7-300 PLC
3.Schneider low voltage element ,KEYENCE PV sensor and SMC vacuum system
Power supply: 380V, 3 phase ,5wire
Laminating area: 3.6m×2.2m
Operate mode: Automatic
Work temperature: Normal -160
Work power: 35KW
Maximum temperature: 180
Peak power: 70-85KW
Work vacuum degree: 50-20Pa
Heating mode: Heat by SD320 oil
Temperature precise: ≤±0.4
Process time : 20Min
Vacuumizing speed: 70L/S
Control mode: Siemens S7-300 or S7-1200 PLC Siemens TP1500 Touch screen
Temperature uniformity: ±1.2 Multi-point temperature control
Pumping time : 0-7min (Adjustable)
Air discharge speed: Can adjust continuously within 0-50L/S
Press of compressed air: 0.6—0.8MPa
Flow volume of compressed air: 200—400L/min
Work time : 24 hours continueously
Rubber board: Nonhazardous high temperature resist rubber board
No comments:
Post a Comment