China strong power vacuum tube separate high pressurized solar thermal hot water collector for solar water heater with heat pipe

1.SRCC,Solar keymark ,CE certificate
2.Working Pressure: 0.7Mpa
3.24mm condesnor heat pipe
4.thread type copper manifold
high pressure Solar water heater:
Features:
1) The manifold of pressure solar collector is made of red copper and conducted by heat transfer medium liquid. Water can't flow in the vacuum tubes and is operated when confined. The manifold uses aluminum alloy mould material of high strength with airflow design.
2) Optional electric heating system for the system (1500W or 2500W)
3) The insulating layer uses polyurethane bulk bubble and has a good effect of temperature preservation or rock wool
4) The product carries out the installation of separation successfully
According to fabricating yard and is harmoniously blended with architecture
5)Anti-freeze: No water inside the tubes when it works, it can work as usual under -38celsuis
6)Bathing, washing, domestic heating
7)Pressure: 0.7Bar
8)capacity: 100L, 200L, 250L, 300L, 400L, 500L
Model type
Xianke XKPC58-15/20/25
construction
Vacuum tube solar collector
no. of collector pipes
15,20,25
tube diameter(OD)
58mm
panel area
XKPC58-15:2.43m
2
, XKPC58-20:3.21m
2
, XKPC58-25:3.99m
2
absorber surface
1.2126m
2
,1.61652m
2
,2.02065 m
2
L×W×H(mm)
XKPC58-15:2050×1190×1450, XKPC58-20:2050×1570×1450, XKPC58-25:2050×1945×1450,
Weight
XK-PC58-15: 48.1KGS
XK-PC58-20: 64.2KGS
XK-PC58-25:79.5KGS
Fluid content
water and medium
angle of inclination
15-90°
max. temp

heat exchanger material
Copper
permissible operating pressure
6bar
test pressure
10bar
manifold connection diameter
22mm
Component material specification
aluminium alloy frame and aluminium alloy manifold with rock wool insulation