1.Manufacturer can be Customized
2.All components are CE certified
3.Competitive price & Nice Model
Usage: Street
solar street lamp
LED lights:
24w,36W, 50W, 60W, 80W, 100W,120w(options)
Solar panel:
80W, 100W, 120W, 150W, 180W,240w(options)
Storage battery:
120AH, 160AH, 200AH, 240AH(options)
Controller:
12V/5A, 24V/10A(options)
Pole:
6m, 8m, 10m, 12m,14m,16m(options)
Daily running hours:
80hrs, 10hrs, 12hrs(options)
Autonomy days:
3days, 4days, 6days(options)
Battery location:
top of pole, bottom of pole, underground(options )
LEDstreet light
LED power:
30-100w, 40-120w, 120-180w, 180-240w, 150-220w
working voltage:
AC(85-150V/165-265v)/(50-60HZ)DC(12V 24V)
power efficiency:
>0.9
production grade:
IP65
applicable life:
50000h
install pipe diameter:
60mm
power factor:
>0.95
LED luminous efficiency:
80-110lm/W
colour developing index:
Ra>70
related color temperature:
2700k-7000k
working environment:
<60C
Lamps and lanterns type:
class1
Special note:
we can manufacture various lamps according to the clients drawings and parameters
Welcome to our company to negotiate
Installation Instruction for solar
Solar panel is made up of solar cell with high efficiency and high transmission rate, low iron tempered glass, anti-aging EVA, high flame resistant TPT/BBT and anodized aluminum alloy. Its merits: high efficiency, long life, easy installation, high wind-resistant, etc.
Manufactured strictly to IEC61215, JY solar panel has pass the examination in authority test center, and it is now widely used in household solar power systems, PV stations, communication station, and in the field of petrol, ocean, meteorological, traffic, buildings, etc
Installation
1. Climate condition
Install the PV panel in the following conditions:
Ambient temperature:-20c-+40c
Operating temperature:-20c-+80c
Snow load capacity: below 2000pa
Water resistance: don’t install the PV panel in a location where it would be immersed in water or continually exposed to water from sprinkler or fountain, etc
Corrosion resistance: except for corrosive salt area and sulfurous area
2. Orientation
Install the PV panels facing south (in Northern Hemisphere) or to north (in southern Hemisphere). Incorrect orientation will result in loss of power output.
PV panels connected in series should be installed at same orientation and angle. Different orientation or angle may cause loss of output power due to the different radiation on the panels.
Install the PV panels as free as possible from shading. Shading causes loss of output, even though the bypass diodes fitted in PV panels by manufactory can minimize such loss
3. Mounting and Notes:
Fasten the PV panels to the shelves with spring washers and flat washers.
Put the PV panels in a proper grounding way, which should be according to the mounting structures and environment.
Note: Do not stall the PV panels near naked flame or flammable materials
Mounting structure should withstand environment. Select proper material and corrosive treatment
Use appropriate methods to mount PV panels. Avoid any damages from falling
Do not disassemble, bend, walk on the panel please do not impact the panels by sharp objects
4. Caution
The PV panel has a pair of waterproof connectors (positive and negative). For the connection in series, please connect the positive (+) connector of 1st PV panel to the negative (-) connector of the next panel
Connect the output cables with load equipments correctly.
Please do not connect the panel’s positive connector to its negative one directly. It will be short circuit.
Make sure there is no gap between the connector and insulator.
If the gap exists, a fire or an electrical shock may occur.
Maintenance
Check the mounting structure. Tighten the loosen components again, if required.
Check the connections of cables, grounding cable connectors frequently.
Clean the face of the panels regularly with soft cloth frequently
Replacing panels should be the same kind and type
Don’t touch live parts of cables and connectors. Use appropriate safety equipments when touching them. (Insulated tools, insulating gloves, etc)
Cover the front surface of PV panel by an opaque cloth or other materials when repairing under sunlight, the PV panels will generate high voltage and it will be dangerous.
No comments:
Post a Comment