TGZ-4 solar panels beacon lighting

At least one solar panel of the four can face up to the sunshine in the process of navigation with high efficiency.
Introduction
This product is consisted of a 120mm polyacrylate and Fresnel len
s
, a lamp holder, a

Microcomputer Controller, high-powered LED, a

physical battery with silicon solar energy and a sealed
maintenance-free storage battery. It has the function of waterproof, ageing and corrosion resistance. On the top of the doom, there is also a bird spike. The four solar modules
obstruction light is
more suitable for navigation. When there is no fixity, it can guarantee that at least one solar panel will face up to the sunshine in the process of rotating, which greatly increases the efficiency for generate electricity. The light can produce strong flash with
high-quality materials, advanced circuits and reasonable structure.
This lamp, using Micro-computer chip as the core control,
is especially suitable for skyscrapers, electric-power towers, television transmitting tower, high chimneys, bridge towers, exploration location, marine navigation and airport lanes which are difficult to maintain in the usual time.

The lamp has an automatic switch controlled by light with such advantages as energy-saving, long life expectancy and environmental protection.

Specification
Light Characteristics
Light Source
60 ultra-high intensity LEDs
Available Color
Red, Green, White, Yellow, Blue etc.
Light Intensity
20cd
Horizontal Output
360 degrees
Vertical Divergence
15 degrees
Available Flash Characteristics
298 including steady-on (user-adjustable)
LED Life Expectancy
>100 000 hours
Electrical Characteristics
Nominal Voltage
DC 12V
Nominal Power
3W
Solar Characteristics
Solar Module type
Multicrystalline
Output
20W
Solar Module Efficiency
>14%
Charging Regulation
Microprocessor controlled
Power Supply
Battery
Type
High-grade maintenance-free Lead Acid Battery
Battery
Capacity
24Ah
Nominal Voltage
DC 12V
Autonomy
Flashing: >40 days
(
14 hours darkness 12.5% duty cycle
)
Steady-on: >20 days
Physical Characteristics
Body Material
Stainless steel (high-grade, spray-painting)
Lens Material
Polycarbonate-UV stabilized
Lens Diameter
130mm
Mounting
4
×
12mm
holes on 170mm PCD
Height
500mm
Width
640mm
Mass
16kg
Life Expectancy
Up to 12 years
Environmental Factors
Humidity
0
—
100%
Waterproof
IP65
Wind Speed
160km/h
Temperature
Range
-40-70 degrees