Super Three Target Vacuum Tube

Delivery:5 days
Cu-SS-Al-N/Al selective coating
3.3 high borosilicate glass
for collect solar
OEM can accepted

Solar Vacuum Tube as the part of solar water heating system is the hot sell in 2011.

solar three target vacuum tubes
Specification:
Outer Diameter and Inner Diameter (MM) 47 / 37 58 / 47
Length of Tube (MM) 1500, 1600, 1800, 2100
Thickness of Tube (MM) 1. 60 more or less 0. 15
Selective absorbing surface: 3layers, aluminum-nitrogen-carbon (Al-N-C)
vcuum :P≤5*10-3pa
Material: Borosilicate glass 3. 3
Color: Blue Or Black
Thermal Expansion: 3. 3 multiply 10-6 / k
Maximum Strength: 0. 6 Mpa
Absorption of Selective Coating: above 96 percent
Emission of Selective Coating: below 4 percent
Stagnation Temperature: above 270-300 degrees / KW
Solar Irradiation for Water Temperature Rise below 3. 0mj / m2
Coefficient of Average Heat Loss below 0. 70w / (m2 degree)
Vacuum above 3. 0 multipy 10-2Pa (anti heat loose)
Bearing hailstone ability 25mm
Super three target vacuum tube assimilate the advanced 12 layers of spattering deposition of trivalent element technology to make the tube has high performance of absorptance and low reflection ratio. The solar tube is made from borosilicate glass 3. 3 and the structure of solar vacuum tubes is as same as the gallbladder of the pot, which is sealed with double glass and the double glass tube is pumped into a high-vacuum. The surface of inner glass is sprayed with selective coating through a special technology. The solar energy absorption rate can reach 96 percent by the usage of the selective coating, while the rate of thermal radiation below 4 percent. Vacuum tube absorbs solar energy, and then heats the water or liquid by heat conduction. The heat loss of liquid is very low through the high-vacuum between inner glass tube and outside, Its stagnation temperature is above 270 degrees. It is widely used in solar water heater, solar collecotor, solar projects. It can works in cloundy days.