Solar Thermal Collector system

1.Solar collector
2. Solar keymark EN12975 & SRCC approved
3. 6 years warranty
4. 15 days delivery
Heat Pipe Vacuum Tube Split Pressure Hot Water Collector with Adjustable Bracket
"Green" Product
Aluminum alloy manifold casing, streamline design
Adjustable bracket, movable track can be mounted well on the tile roof
Polyurethane foam and glass fabric insulation
Thicker copper pipe, higher pressure withstand over 6 bar
Anti-freezing design can work well in the cold area
Split design, harmonious with the building
Heat pipe series solar collector are always connected with existing heating supply device Selective coating on the inner cover of the evacuated tubes converts solar energy into heat energy and transfers heat to the heat pipes by aluminum fins
Liquid in heat pipe changes into vapor which rises to the condenser
Heat then passes through the heat exchanger
Vapor becomes liquid, returning to the base of the heat pipe
Heat conducts to the heat transfer liquid (anti-freezing liquid or water) via a copper pipe
Transference of heat into the liquid creates a continuous circulation as long as the collector is heated by the sun
Heat pipe collectors approved by EN12975-1, 2, solar key mark, SRCC
Solar Pressurized Thermal Collectors with Separated Storage Tank, Available in Anti-freezing Design
Manifold:
Interior---Copper
Exterior: Alluminum Alloy
Frame: Alluminum Alloy
Tube Coating: ALN/ALN-SS/AL with heat pipe
Tube Dimension : 58mm X 1800mm / 47mm X 1500mm/ 58mm X 2100mm
Daily Efficiency :≥55%, ≥45% in winter
Operating Pressure : 6 Bar
Anti-Freeze:-35 degree
Hail Resistance: 25mm