Solar air separator

Built-in unique honeycomb net, solar air separator can remove both free air and micro bubbles from solar hot water system.
Solar air separator for solar heating systems where air bubbles and micro bubbles must be discharge from water.
Can withstand continuous temperature of -40---180 degree, max pressure is 10 bar.
While using the air vent on the solar system, it make the system operate more effectively.


The core exposes the differences
The solar air separator's unique construction allows it not just to remove large free flowing air but also the countless micro-bubbles. Thus the solar air separator is able to remove dissolved gases from the water thereby conditioning it to a highly absorptive state. Air problems become a thing of the past.


The honeycomb net in the solar air separator makes the difference
The honeycomb net is at the heart of the unit. It allows the solar air separator to deaerate the water which produces the above mentioned advantages. The honeycomb net is made from soldered copper mesh which creates a very still area of water in the air separator. Even the smallest microbubbles which enter in the main stream are given the opportunity to rise. The air collects in the air chamber before discharged through automatic valve. Floating dirt can be removed through the scum valve.

ADVANTAGES
Greatly reduced commissioning times ager initial fill, no more venting required
Optimum heat transfer
Increased component life
No oxygen based corrosion or pump cavitation
Quiet operation
Dirty water protector