oblique single-axis tracking stand

oblique single-axis tracking stand
1.IS09001:2008
2.Full-automatic
3.Applicable in the middle and low-latitude areas
oblique single-axis tracking stand
Product Advantages:
1. This kind of stent uses the mechanical linkage structure with low cost and high reliability, and a single set of racks can be installed above 50 KWP crystalline silicon components.
2. It is applicable in a middle- and low-latitude region; the annual output can be increased by over 35% at most.
3. It is automatic tracking, with the “anti-shadow reverse tracking” function.
4. The main rotating components use automatic lubricating polymer material bearings, which is anti-sandstorm and maintenance-free.
5. It can identify the local geographical location automatically and time automatically when equipped with GPS module.

Product Features:
1. Control method: PLC clock control with anti-shadow reverse tracking function; GPS timing and geographic identification (optional), group control (optional)
2. Specification: 2.35 KWP per square array (10 pieces of 235KWP crystalline silicon components), 20 square arrays for mechanical linkage at most, customizable
3. Area: 17m
2
(2m*8.5m)per square array
4. Dip angle: 20°,30°,depand on you demand
5. Spindle length: 6-9m
6. Tracking accuracy: ±5°
7. Tracking range: -60°~+60°
8. Maximum safety instantaneous wind speed: 34m/s
9. Maximum instantaneous wind speed during normal work: 25m/s
10.Applicable temperature: -30°C~+50°C
11. Protection class: IP65
12. Material: Q235B Steel, hot-dip zinc
13. Life time: 25years, 5-year warranty for mechanical parts, 2-year warranty for electrical part.