Wednesday, August 3, 2011

MPPT 10A/15A 12V/24V SOLAR PANEL CHARGE CONTROLLER

solar regulator, MPPT series, 12V/24V auto sense 15A 10A 20A 30A 40A 50A 60A available in stock
Solar regulator WS-MPPT15 10A/15A 48V 12V/24V
WS-MPPT15 15A solar regulator (also known as WELLSEE intelligent solar charge controller, solar charge controller, PV controller) can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Compared with ordinary solar controller, this MPPT controller can increase the efficiency of PV modules by 10%-30%. WELLSEE WS-MPPT solar controllers 10A--60A include 12V series, 24V series and 48V series.

MPPT advantage
:
Maximum Power Point Tracking (MPPT in short) system is a system which allows PV panels to outputs more Power by adjusting working condition of the electrical module. In Figure1 A indicates that the ordinary controller, which makes PV battery work on 12V ,only outputs a power point of 53W (a general power point), B indicates that MPPT controller makes PV battery always work at the maximum power point, thus outputs the power point of 75W (the maximum power point).

Product features:

Applicable to various types of batteries,
MPPT function
Microprocessor controller pulse width modulation (PWM) charging
Temperature sensor battery charging compensation
Overload protection (automatic restoration)
Overcharge protection
Short circuit protection (automatic restoration) ,
Thunder protection
Reverse discharge protection
Reverse polarity connection protection (automatic restoration)
Under voltage protection

MPPT principle:

The maximum power point is mainly affected by the ambient temperature and the intensity of sunshine. The intensity of sunshine being constant, the maximum output power decreases with the rise of the temperature. The temperature being constant, when the sunshine intensifies, the open circuit voltage of PV battery basically keeps unchanged. But the short circuit current increases substantially, thus the maximum output power increases substantially.

This WS-MPPT solar controller can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Compared with ordinary solar controller, this MPPT controller can increase the efficiency of PV modules by about 30%.

However, due to many different factors, such as the difference in solar panel making, the change the Sun illuminance, change in temperature, the efficiency of the controller etc., the actually available increased rate is 10%-30%.


Model
WS-MPPT10
WS-MPPT15
Rated Voltage
12V / 24V / 48V
Max Load current
10A
15A
Input voltage range
12V
~40
V / 24V
~8
0V / 48V
~11
0V
Length≤1m
Charge loop drop
<
0.25V
Length≤1m
Discharge loop drop
<0.05V
Over voltage protection
17V / 34V / 68V
Full charge cut
13.7V / 27.4V / 54.8V
Low voltage cut
10.5V
~
11V /21V
~
22V /42V
~
43V
Temperature compensation
-3mv/
C
/cell
No load loss
≤10mA
Max wire area
2.5 mm
2
2.5mm
2
Ambient temperature
--25
C
——+55
C




No comments:

Post a Comment