1.3% power tolerance
2.conformity to CE, IEC61215 , ISO ,Standard
3. 25 Years Warranty
4.high efficiency solar panel !
1) The reliable source of high-eff. Solar cells and experienced technical forces enable us to supply any shape-customized solar panel with ideal module eff.
2) To ensure good product quality, the whole manufacturing process involves three-time test. a) Solar Cells incoming inspection b) Test right after the laminator come out of laminator machine c) Final test before modules are packaged.
3) These three tests will ensure that our products can meet their manufacturing standards: a) Power Output Tolerance of +/-3% b) reliable and stable Imp and Vmp under STCs.
4) 3.2 mm High-transmission Low-iron Tempered glass, anti-aging EVA, and waterproof TPT backsheet are laminated with solar cells together. This will guarantee twenty-five (25) years life span of the solar modules.
5) Anodized aluminum alloy frame increases the modules rigidity (or mechanical strength) as well as beautify the module. At the same time, practical designs on the backside of frame make it easy to install the module and eliminate the possible accumulation of water and snow
6) Our solar modules can be left outside and free of maintenance. It endures bad weather conditions like strong wind, hails and pour.
7) Multifunction conjunction box with waterproof ability; multi-contact connector Output cable;
8) Schotkey bypass diodes minimize the power drop arising from the shade.
Module 130W solar panel
Encapsulation Glass / EVA /Cells /EVA /TPT
Maximum Power Pmax W 130W
Tolerance + / -3%
Open Circuit Voltage VOC V 21.5 V
Short Circuit Current ISC A 8.40A
Maximum Power Voltage VMP V 17.5 V
Maximum Power Current IMP A 7.43 A
Maximum System Voltage DC 1000V
Maximum Series Fuse Rating 10A
Solar Cell 156 x 156 mm
No. of cells 4 x 9
Dimension(L x W x H) mm 1476 x 670 x 40mm
PCS in one Carton PC 3 PCS
Net Weight KG 12KGS
Operate .Temp.Scope -40 / +85
Relative Humidity 0 to 100%
Resistance 227g steel ball fall down from 1m height and 120m /s wind
Warranty Pm is no less 90% in 10 years and no less 80% in 25 years.
No comments:
Post a Comment