10 watt mono solar module

10w Solar panel
1) poly and Mono crystalline solar panels
2) TUV, IEC, CE, ROHS. ISO EMC Certification
3) 2 years warranty
10w mono solar module
SpecificationCell name Mono-crystalline solar cells Cell size 62.5mm x 31.25mmNo. of cells and connections36 series (4 x 9)Unit weight 1.8kgModule size 345x285x18 (mm)Produced in accordance with ISO, IEC, CE and TUV etc. Electrical CharacteristicsNominal peak power (Wp) 10WpNominal voltage (Vmp) 17V Nominal current (Imp) 0.59AOpen circuit voltage (Voc) 21VShort circuit current (Isc) 0.66ASolar cell efficiency 15.0%Maximum system Voltage 715V DC Physical CharacteristicsOperating temperature -40 to +85Storage temperature -40 to +85Pressure bearing ≥2400PaWind bearing ≥5400PaHail impact test 225g steel ball drops from height of 1m Temperature CoefficientsNoct 45 ±2Temperature coefficient of ISC +0.05%/Temperature coefficient of VOC +0.05%/Temperature coefficient of PM +0.05%/Power output Tolerance ±3% Product DescriptionSFM-10 solar module is connected in series by 36 pieces of 62.5mmx31.25mm crystalline silicon cells. The product performance is produced according to ISO, IEC, CE and TUV etc. international standard. It can also be tailored to special requirements of customer. Features and Advantages1. High luminousness low iron hardened glass;2. Anti-ageing EVA and excellent anti-climate back sheet;3. Anodized excellent aluminum alloy frame;4. High conversion efficiency, long life, convenient installation, wind protection, hail-stone protection;5. High quality product warranty for 25 years.
Application1. Power supply for remote telecommunication equipment;2. Monitoring systems for the oil & gas industry;3. Traffic, security, environment and other remote monitoring and signaling systems;4. Water pumping systems;5. Rural electrification;6. Small home power systems;7. 12V and 24V battery charging systems;8. Other industrial and commercial applications Installation1. Install the PV modules facing South (in Northern hemisphere), or North (in Southern hemisphere).2. PV modules connected in series should be installed at same orientation and angle. Different orientation or angle may cause loss of power output due to difference of amount of sunlight exposed to the modules.