heat pipe Solar Collector

Pressure Solar Collector,
1.OEM available
2,Best heating efficiency
3,Simple installation
4,Anti-freezing -40 degrees
Pressure Solar Collector,
Technical Parameters


Heat Pipe
Vacuum Tube
Size (mm)
Φ47×1500 Φ58×1800
Tubes (pcs)
12 / 15 / 20 / 25 / 30
Material
Three-target vacuum tube, red copper heat pipe, aluminum fin
Coating
Cu/SS-ALN(H)/SS-ALN(L)/ALN
Pressurized
Manifold
Flow passage
High-quality red copper Φ35*1.0mm
Outer shell
Aluminum alloy plate 2mm
Insulation
Processed high-density rockwool/ polyurethane
Bracket
Aluminum alloy 1.8~2.0mm
Accessories
Stainless bolts & nuts, dustproof rubber seal, plastic tube holder
Working Pressure
6.0-9.0 bar
Tilt Angle
25°~ 90° (-5° upright or level shift)
Hail Resistance
Φ25mm diameter
Anti-freezing
≤ (-)40°C


Features description:
The heat pipe solar collector consists of heat pipe glass vacuum tube, pressurized manifold, suppoting bracket and other related accessories
1) Solar heat pipe and its inner midium for thermal conduction, with a quick start and super daily efficiency about 55% in summer and 42% in winter, much more than that of the all-glass tube
2) The flow passage is inner closed and pressurized, no water or medium goes through glass vacuum tubes, no freeze to break vacuum tubes, able to serve in extremely cold weather
3) Heat pipe tip is inserted into a closed cannula welded into the copper flow passage, collector works well even withdrawal one or several heat pipe vacuum tubes
4) Aluminum alloy as bracket with super performance in chemical resistance, universal bracket suitable for slope and flat roof installation
5) Modularized collector, arbitrary combination with any architectural structure, adaptable to either slope roof or flat ground or upright walls, almost maintenance free collector
Warranty:

3 years international responsibility for solar collector and 15 years for glass tubes due to original quality problems

Installaion in Germany: