charge controller VWG2008V4

charge controller VWG2008V4
-Removed digital display
-PWM charge mode
-Certification:CE;
-Auto detection 12V/24V voltage
The specification of charge controller VWG2008V4

1.Removed digital display.
You can use one display for the same type VWG2008V412/24v charge controller. It save some cost of for you.
2.Automatic voltage detection for 12 Volt or 24 Volt systems
3. Intelligent Microcontroller system
is programmed to deliver bulk and
float phase charging.
This feature ensures that batteries are optimally charged
4. LED indicators keep the user informed about system working status;
5. The PWM electronic charge regulator
tapers charge to the battery by gradually limiting windcharger current to avoid battery overcharge.
When regulating the turbine speed is gradually reduced
As fully charged batteries are more likely to occur in high winds this slow mode of operation is safer and reduces wear
6.Temperature compensation automatically
adjusts the settings of the regulator to take account of varying temperatures thus ensuring maximum charging efficiency in all conditions.

Charge controller VWG2008V4 parameter:
Model
VWG2008V4-12/24v
Rated power
600W
Max Wind Input Power
600W
Max PV Input Power
200W
Rated Battery Voltage
12V
24V
over voltage protective voltage
17.5V
32.5V
Battery over charge protective voltage
14.4V
28.8V
Battery over discharge protective voltage
10.98V
21.97V
Over discharge voltage recovery
12.44V
24.88V
Rated charge current
42A
21A
No load loss
≤45mA
Protection Type
1,Over charged protection; 2.Over discharged protection. 3. Reverse polarity connection protection. 4. PV Panel reverse current protection. 5. Short circuit protection. 6. Thunder and Lighting protection
operation Ambient tempreture
-10~50
o
C
operation Ambient humidity
0~90%
Size(W×H×D)mm
284×181×76mm
WeightKG
1.6kg