Evacuated Tube Solar Collector (14/24mm Condensor)

Evacuated Tube Solar Collector
1. Solar Keymark EN12975
2. SRCC OG-100
3. 5 years warranty
4. Condensor: 24mm/ 14mm
The JHC evacuated tube solar collectors are heat pipe type solar collectors in which the tubes transfer the collected energy to the manifold, where it heats the solar fluid inside.
They are ideal for different latitudes due to their high efficiency, especially advanced in high latitude area, even in cold winter.

Advantage:

1. Condensor of 24mm, high eifficient for heat exchanger


2. Installed both on flat roof and slopping roof

Flat roof installation on concrete basis

Slopping roof inslation with roof hooks

Operating parameters
- Maximum fluid pressure: 12 bar
- Maximum Operating fluid pressure: 6 bar
- Maximum service temperature: 95 °C
- Maximum stagnation temperature: 221°C
- Recommended tilt angle: 15° - 75°
- Nominal flow rate: 160 l/h
- Optical Efficiency (n0): 0.751
- Linear Loss Co-efficient (a1): 2.57 W/m²K
- Quadratic Loss Co-efficient (a2): 0.0036 W/m²K²

Assembled with exisiting boiler system:

Advantage:
High pressure testing, quality could be assured
High pressure water for shower, high performance
Anti-freezing, suitable for cold area
Long life time, offer 5 years warranty for the whole set
Economic design, value to buy